SME9.0 Contribs QA

From SME Server
Jump to navigation Jump to search

Version 9 beta3 Contrib testing

This document lists Contribs that, need to be tested or have had been tested running under SME 9

Contribs should work if they are perl or php based (unless php53 deprecated some functions needed) . Some binary applications will work as well.

Contribs using perl modules might be broken due to change of path

Please also see Contribs Bugreport

Test guidelines

Considerations_before_installing advises that Contribs for SME 9 have not yet been released, this is to avoid dev workload diagnosing bugs caused by contribs.

Please don't post SME 9 bugs unless you can replicate the bug with the contrib removed or isolated.


  Note:
If you have suggestions, issues or solutions for a contrib, please post them in bugzilla

against the contrib.


Setup

During the transition from SME8 to SME9, contrib packages will be migrated to the SME9 contrib repository. If the contrib is not yet in the SME8 Contrib repository and an entry in this Q&A suggests it will install properly then you will need to install the contrib from the SME8 repository.

Check to see if you already have the sme8contribs repository set up using the command:

db yum_repositories show sme8contribs

If it returns nothing then you will need to create a repo named sme8contribs, which points to the SME 8 smecontribs repo


db yum_repositories set sme8contribs repository \
Name 'SME 8 - contribs' \
MirrorList 'http://mirrorlist.contribs.org/mirrorlist/smecontribs-8' \
GPGCheck yes \
Visible no \
status disabled

signal-event yum-modify
yum clean all


  Note:
now you will need to add the package from sme8contribs and smecontribs to resolve some problems of dependencies...



  Note:
you might also consider to add some external repo such as dag and epel...



The following shows an example of how to install a contrib from the SME 8 repo:

 yum --enablerepo=sme8contribs,smecontribs install smeserver-openvpn-s2s

Notice the additional phrase "sme8contribs," in the command line.

Another example is as follows:

 yum install smeserver-usbdisksmanager --enablerepo=sme8contribs --enablerepo=smecontribs

Template for testing

not working

please open a bug against the contrib. , and write in the wiki you tested it and it fails.

  • wikipage : smeserver-contrib
  • bugs : bugzilla:NUMBER
  • to install : yum install smeserver-contrib --enablerepo=sme8contribs,smecontribs,epel
  • version-release tried:
  • dependencies not in smeos,smeaddons,smecontribs:
  • error :
  • workaround :
  • tested beyond installation : yes / no


working

write here it works, with theses informations :

  • wikipage : smeserver-contrib
  • to install : yum install smeserver-contrib --enablerepo=sme8contribs,smecontribs,epel
  • version-release installed:
  • dependencies not in smeos,smeaddons,smecontribs:
  • tested beyond installation : yes / no

Contribs

List of Contribs being tested


Need to test

smeserver-adv-samba

smeserver-affa

smeserver-ajaxterm


smeserver-arpwatch

smeserver-automysqlbackup

yum install --enablerepo=sme8contribs smeserver-automysqlbackup
  • version-release installed:
automysqlbackup-3.0.RC6-3.el5.sme.noarch  
smeserver-automysqlbackup-3.0.RC6-3.el5.sme.noarch
  • dependencies not in smeos,smeaddons,smecontribs: all in sme8contribs
  • tested beyond installation : yes
Works as expected, just follow instructions as per the wiki above

smeserver-awstats


smeserver-BackupPC

smeserver-bandwidthd

smeserver-bridge-interface

  • no wiki

smeserver-bugzilla

  • no wiki

smeserver-cacti

smeserver-crontab_manager

smeserver-dansguardian


smeserver-dar2

smeserver-ddclient

smeserver-denyhosts

smeserver-dimp

  • no wiki

smeserver-diskusage

smeserver-durep

smeserver-egroupware

smeserver-ejabberd

smeserver-ezmlm-web

smeserver-fetchmail

smeserver-freepbx

smeserver-geoip

smeserver-gollem

  • no wiki, Horde plugin

smeserver-groupmembers-panel

smeserver-htbwshaper

smeserver-hwinfo

smeserver-hylafax

smeserver-isoqlog

smeserver-jeta

  • no wiki

smeserver-kplaylist

smeserver-kronolith

smeserver-Lazy_Admin_Tools

smeserver-madsonic

smeserver-mailman

smeserver-mailsorting

smeserver-mailstats

smeserver-mimp

  • no wiki

smeserver-mnemo

smeserver-mod_dav

smeserver-mod_deflate

smeserver-mod_python

smeserver-nag

smeserver-nagios

smeserver-nagios-backup

smeserver-nagios-nrpe

smeserver-nagios-nsca

smeserver-nagios-plugins-mysql

smeserver-nfs

smeserver-oats

smeserver-ocsinventory

smeserver-openoffice-portable

smeserver-openvpn-bridge

smeserver-openvpn-s2s

smeserver-password

smeserver-phpki

smeserver-phpldapadmin

smeserver-phpmyadmin

smeserver-phpsysinfo

smeserver-phpvirtualbox

yum install --enablerepo=sme8contribs,virtualbox smeserver-virtualbox smeserver-phpvirtualbox
  • version-release installed:
smeserver-phpvirtualbox.noarch 0:4.3.0-10.el5.sme
smeserver-virtualbox.noarch 0:4.3.0-5.el5.sme 
  • dependencies not in smeos,smeaddons,smecontribs: Virtualbox is in the virtualbox repository

You have to install dkms but it is in the relevant epel repository

  • tested beyond installation : yes
Works as expected, just follow instructions as per the wiki above

smeserver-phpwebftp

smeserver-popfile

smeserver-postgresql

  • Postgres ?? should update this wiki page

smeserver-print-monitor

smeserver-qmHandle

smeserver-qpsmtpd-spamassassinlevelstars

smeserver-raidmonitor

smeserver-rdiff-backup

smeserver-remoteuseraccess

smeserver-rkhunter

smeserver-roundcube

yum install --enablerepo=sme8contribs smeserver-roundcube
  • version-release installed:
roundcube-0.9.5-1.el5.sme.noarch
smeserver-roundcube-0.9-18.el5.sme.noarch
  • dependencies not in smeos,smeaddons,smecontribs: all in sme8contribs
  • tested beyond installation : yes
Works as expected, just follow instructions as per the wiki above

smeserver-sane

smeserver-sarg

smeserver-shared-folders

smeserver-sitemaker

smeserver-sme8admin

smeserver-subsonic

smeserver-subversion

smeserver-sysmon

smeserver-tftp-server

smeserver-theaddressbook

smeserver-thinclient

Warning: The contrib allows to specify the TFTP server as "Self". This worked well under SME7 but not under SME8. To get this working under SME8, we had to choose the SME server's IP address to achieve the same result as "self" otherwise the clients cannot find/load from the TFTP server. We have reported this as bug 6542 for the contrib but with this workaround, the contrib is working well under SME8. Bug has been reported as work for me, so please comment on it if you can replicate.

smeserver-transmission

BROKEN see bugzilla:8134

yum install --enablerepo=sme8contribs,geekery smeserver-transmission
  • version-release tried: smeserver-transmission-0.0.1-9.el5.sme.noarch.rpm
  • dependencies not in smeos,smeaddons,smecontribs: in geekery
transmission-2.76-1geekery.x86_64.rpm
transmission-cli-2.76-1geekery.x86_64.rpm
transmission-common-2.76-1geekery.x86_64.rpm
transmission-daemon-2.76-1geekery.x86_64.rpm 
libevent2-2.0.10-1geekery.x86_64.rpm
  • error :

Transaction Check Error:

 file /etc/e-smith/events/post-upgrade/templates2expand/etc/samba/smb.conf from install of smeserver-transmission-0.0.1-9.el5.sme.noarch conflicts with file from package e-smith-samba-2.4.0-13.el6.sme.noarch
  • workaround : see bugzilla:8134
  • tested beyond installation : not yet

smeserver-tw-logonscript

smeserver-unjunkmgr

smeserver-updates

smeserver-usbdisksmanager

smeserver-userpanel

smeserver-userpanels

smeserver-UserWebSpace

  • no wiki page

smeserver-vacation

smeserver-virtualbox

see SME9.0_Contribs_QA#smeserver-phpvirtualbox

Works as expected, just follow instructions as per the wiki above

smeserver-wbl

smeserver-webconsole

smeserver-webshare

smeserver-wordpress

yum install --enablerepo=sme8contribs,epel smeserver-wordpress
  • version-release installed:
smeserver-wordpress-1.0-13.el5.sme.noarch
  • dependencies not in smeos,smeaddons,smecontribs: all in epel
php-IDNA_Convert-0.8.0-1.el6.noarch                                                                                                                                                             1/8 
php-simplepie-1.3.1-3.el6.noarch                                                                                                                                                                2/8 
php-process-5.3.3-27.el6_5.x86_64                                                                                                                                                               3/8 
1:enchant-1.5.0-4.el6.x86_64                                                                                                                                                                    4/8 
php-enchant-5.3.3-27.el6_5.x86_64                                                                                                                                                               5/8 
php-PHPMailer-5.2.2-1.el6.noarch                                                                                                                                                                6/8 
wordpress-3.8-1.el6.noarch                 
  • tested beyond installation : yes
Works as expected, just follow instructions as per the wiki above

smeserver-xinetd

Won't be ported to SME9

smeserver-vmware-server

vmware server is not supported anymore please consider using virtualbox, or KVM...