SME8.0 Contribs QA

From SME Server
Revision as of 22:07, 25 February 2013 by Uniqsys (talk | contribs) (Typo ~~~~)
Jump to navigationJump to search

Version 8.0 Contrib testing

This document lists Contribs that have had been tested running under SME 8

Contribs should work if they are perl or php based. Some binary applications will work as well.

Please also see Contribs Bugreport

Test guidelines

Considerations_before_installing advises that Contribs for SME 8 have not yet been released, this is to avoid dev workload diagnosing bugs caused by contribs.

Please don't post sme 8 bugs unless you can replicate the bug with the contrib removed or isolated.


Important.png Note:
If you have suggestions, issues or solutions for a contrib, please post them in bugzilla

against the contrib.


Setup

During the transition from SME7 to SME8, contrib packages will be migrated to the SME8 contrib repository. If the contrib is not yet in the SME8 Contrib repository and an entry in this Q&A suggests it will install properly then you will need to install the contrib from the SME7 repository.

Check to see if you already have the sme7contribs repository set up using the command: 

db yum_repositories show sme7contribs

If it returns nothing then you will need to create a repo named sme7contribs, which points to the SME7 smecontribs repo 

db yum_repositories set sme7contribs repository \
GPGCheck yes \
MirrorList http://distro.ibiblio.org/pub/linux/distributions/smeserver/mirrorlist/smecontribs-7 \
Name 'SME 7 - contribs' \
Visible no \
status disabled

signal-event yum-modify
yum clean all


Important.png Note:
now when you will install a package from sme7contribs, you need to use smecontribs to resolve some problems of dependencies...


The following shows an example of how to install a contrib from the SME7 repo: 

yum --enablerepo=sme7contribs --enablerepo=smecontribs install smeserver-openvpn-s2s

Contribs

List of Contribs being tested

Working available through SME8 smecontribs repo

smeserver-denyhosts

Denyhosts - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-dimp

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-durep

A new package will soon be available in sme8 contribs repo, check: http://wiki.contribs.org/Durep 

- Installs OK and fully functional.

smeserver-fetchmail

Fetchmail installs as per wiki, version 1.3.6-17 works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-gollem

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-isoqlog *

isoqlog installs as per wiki, 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-jeta

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-Lazy_Admin_Tools *

lat installs as per wiki, 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-kronolith

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mailstats

mailstats - sme-mailstats - Install as per wiki, Works as expected. 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mimp

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mnemo

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mod_dav

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nag

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-phpmyadmin

PHPMyAdmin - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

phpmyadmin 2 package too old, not supported with php 53, numerous deprecated function, will do a lot of buggy sql request DO NOT USE phpmyadmin 2, update immediatly to the newest package (phpmyadmin3.5)provided in smecontribs ! see : This issue has now been fixed, check: http://bugs.contribs.org/show_bug.cgi?id=7088

smeserver-qmHandle *

fully working 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-rkhunter

rkhunter - Installed from contribs repo - seems to work fine afaict 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-sme8admin *

fully working 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-subversion

subversion Install as per Wiki - Works as expected in SME8b7 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-sysmon *

fully working 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-usbdisksmanager

fully working 

- All dependencies are in smecontribs, smeaddons or smeextras




  • new or returning contribs absent from SME7 repo

Working available through SME7 smecontribs repo

logwatch

logwatch - Installed from addons repo - seems to work fine afaict 

- All dependencies are in smecontribs, smeaddons or smeextras

I don't think it will be imported to sme8 repo as it is a package available directly from repoforge for el5 without any SME customization and no maintainer 13:27, 5 February 2013 (MST)Unnilennium (talk)

smeserver-adv-samba

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-affa

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-ajaxterm

Ajaxterm - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-arpwatch

Installed and running (ver: smeserver-arpwatch-0.1-2) in a semi-production environment (SME8b6) 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-awstats

AWStats - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-BackupPC

BackupPC install as per wiki, works as expected

- All dependencies are in smecontribs, smeaddons or smeextras

bugzilla:7281 see bugzilla if you can't backup with the smb protocol

smeserver-bridge-interface

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-bugzilla

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-cacti

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-dar2

Works as expected, although the built in backup to workstation has more functionality (and uses dar) 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-ddclient

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-diskusage

Diskusage - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-ejabberd

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-ezmlm-web

Installed OK to sme8.0 final and setup one mailing list & tested, works OK, not extensively tested though 

- All dependencies are in smecontribs (or from manually configured sme7contribs repo on sme8.0)

smeserver-freepbx

Functionality hasn't been tested beyond ability to install AND update.

Needs atprms-repository configured. Install as per howto[1]

After installing I was able to update FreePBX from 2.6 to 2.9, the latest stable, by using the update function in the FreePBX web-interface.

There are some udev errors while booting, claiming about invalid dahdi.rules. This seems not to be critical. I will post this to the bug-tracker.

smeserver-gallery2

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-geneweb

Geneweb installs as per wiki and works as expected. Not thoroughly tested, but basic functionality (transfering a database form 7.5.1, uploading pictures, restricting access) is available 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-groupmembers-panel

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-groupoffice

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-htbwshaper

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-hwinfo

Hardware Info - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-kplaylist

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mailsorting

Smeserver-mailsorting - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mediawiki

Functionality hasn't been tested beyond ability to install

Install using this post: testing Mediawiki 1.15.1 on SME 8 (may no longer be necessary) 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mod_deflate

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-mod_python

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nagios

Functionality hasn't been tested beyond ability to install - see Note Nagios about making this work in SME8 (needs to be rechecked with updated pacakges and dependencies) 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nagios-backup

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nagiosgrapher

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nagios-nrpe

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nagios-nsca

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nagios-plugins-mysql

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-nfs

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-openoffice-portable

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-openvpn-s2s

Install as per Wiki - Works as expected. 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-openvpn-bridge

Install as per Wiki - Works as expected. 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-oscommerce

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-password

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

do what you need but there is a warning in the SME Server panel when you use it.bugzilla:7038 Stephdl (talk) 13:27, 4 February 2013 (MST)

smeserver-phpbb

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-phpki

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-phpldapadmin

Install as per Wiki - Works as expected. 

- All dependencies are in smecontribs, smeaddons or smeextras

Note: The version of phpldapadmin supplied in smeserver-phpldapadmin (0.9.8) is old, upgrading to the latest version (1.2.2) is required, refer: http://bugs.contribs.org/show_bug.cgi?id=6895

smeserver-phpsysinfo

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-phpwebftp

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-popfile

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-postgresql

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-print-monitor

LPRng print queue monitor‎ - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-qpsmtpd-spamassassinlevelstars

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-raidmonitor

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-rdiff-backup

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-remoteuseraccess

Smeserver-remoteuseraccess - install as per wiki, bash works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-sane

SANE - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-sarg

Sarg - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-shared-folders

Functionality hasn't been tested beyond ability to install

by Jáder: I have installed it as by howto.

Just had to use "signal-event post-upgrade && signal-event reboot " because just "expand-template /etc/fstab" do not worked.

I found an error (will put on bugzilla): when creating a share with name longer than limit (12 as standard), just returns an generic ERROR and do not say the cause.

Other than that, it appears to be working I was able to copy to, read, del files. 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-sitemaker

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-smf

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-teamspeak-server

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-tftp-server

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-thinclient

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

Warning: The contrib allows to specify the TFTP server as "Self". This worked well under SME7 but not under SME8. To get this working under SME8, we had to choose the SME server's IP address to achieve the same result as "self" otherwise the clients cannot find/load from the TFTP server.

We have reported this as bug 6542 for the contrib but with this workaround, the contrib is working well under SME8.

smeserver-tw-logonscript

Smeserver-tw-logonscript Install as per Wiki - Works as expected. 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-typo3

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-unjunkmgr

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-updates

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-userpanel

User-manager - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-userpanels

Smeserver-userpanels - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-vacation

Smeserver-vacation - install as per wiki, works as expected 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-wbl

Email#Email_WBL_server_manager_panel - Installs and runs fine as far as I can see. 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-webconsole

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-xinetd

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

Workarounds

Contribs that sort of work, but need improvement

smeserver-vmware

This contrib introduces a dependency that cannot be resolved and it is no longer necessary. Please see the Vmware wiki entry for complete installation and maintenance instructions for SME8.

smeserver-zarafa

Zarafa - Because of PHP 5.2.10 in SME8b5 WIP there is a problem with the mapi.so module, see bugzilla:5789:

Tested with: 

- SME8b5 WIP
- zarafa-6.40.0 RC2
- smeserver-zarafa-0.9.0-49.el4.sme

User WebSpace

This contribs work followin the steps described here [2]

but without php interpretation. to enable php for users we need to edit the templated istalled with the package: 

   /etc/e-smith/templates/etc/httpd/conf/httpd.conf/90e-smithAccess50userdir

and add the following lines: 

   AddType application/x-httpd-php .php .php3 .phtml
   AddType application/x-httpd-php-source .phps

in the fragment of code that define "Generic user dir access directive"

after that we expand the modified template and restart the service: 

   expand-template /etc/httpd/conf/httpd.conf

   sv h /service/httpd-e-smith

i hope that this hint can help unexperienced users, REDTEO

Broken (or missing dependencies)

smeserver-coova-chilli

smeserver-dansguardian

Dansguardian - install as per wiki, works as expected

dansguardian would likely benefit from rebuilding on a .el5 base 

- Needs to have package rebuilt for el5

smeserver-dirty-tools

smeserver-ezmlm-www

smeserver-hylafax

Reported to be working in Forums: http://forums.contribs.org/index.php?topic=48498.new;topicseen#new

smeserver-jinzora

smeserver-joomla

smeserver-mailman

Mailman - Mailman contrib causes SME 8 bootstrap-console to hang (need retest after apache fix and dependency updates).


Important.png Note:
After post-upgrade/reboot, SME hangs during boot-strap-console reconfiguration. The problem is a restart of mailman in bootstrap-console-save event. if this package is removed the server can start and finish his reconfigure/reboot event.


bugzilla:6693 Stephdl (talk) 13:29, 4 February 2013 (MST) 

- All dependencies are in smecontribs, smeaddons or smeextras

smeserver-moodle

smeserver-oats

smeserver-ocsinventory

smeserver-photos

smeserver-php5-cgi

No longer required as php5 is in SME 8 base

see http://forums.contribs.org/index.php/topic,47647.0.html and also http://bugs.contribs.org/show_bug.cgi?id=6652


smeserver-phpmyadmin-multiuser

Functionality hasn't been tested beyond ability to install 

- All dependencies are in smecontribs, smeaddons or smeextras

phpmyadmin package too old, not supported with php 53, numerous deprecated fucntion, will do a lot of buggy sql request DO NOT USE ! should be adapted to a phpmyadmin http://rpms.famillecollet.com/el5.i386/phpMyAdmin-3.5.2.1-1.el5.remi.noarch.rpm

NOTE: This issue has now been fixed, check: http://bugs.contribs.org/show_bug.cgi?id=7088

smeserver-roundcube

Bugzilla:6843

Works for me as follows:

  • install from sme7contribs:
yum enablerepo=sme7contribs install smeserver-roundcube
signal-event post-upgrade; signal-event reboot

At this point, attempting to open roundcube generates the following error in /var/log/messages: 

 httpd: PHP Fatal error:  Cannot redeclare quoted_printable_encode() in /opt/roundcube/program/include/rcube_imap.inc on line 2656
  • download the latest sources from sourceforge (0.7.1 as of this writing):

- browse to http://sourceforge.net/projects/roundcubemail/ - click the download button - right-click the 'direct link' url in the download page header, and select 'copy link location' - at a shell prompt on the sme server: 

wget <paste link location>
  • extract the downloaded source (replace "roundcubemail-0.7.1.tar.gz" with the actual filename downloaded in step 2):
tar zxvf roundcubemail-0.7.1.tar.gz
  • copy extracted roundcube code on top of the code that was installed by the rpm:
'cp' -rf roundcubemail-0.7.1/* /opt/roundcube
  • Drop and re-create all roundcube tables from mysql (If you're updating an existin roundcube installation you'll need to manually figure out which of the commands in /opt/roundcube/SQL/mysql.update.sql)
mysqldump --add-drop-table --no-data roundcube |grep ^DROP |mysql roundcube
cd /opt/roundcube
mysql roundcube < SQL/mysql.initial.sql

Note: drop all tables using mysqldump courtesy of http://www.thingy-ma-jig.co.uk/comment/7075

Roundcube now opens at http://<my.smeserver.tld>/roundcube

  • Configuration changes (for each user):
    • login and select "Settings" from the top right
    • Folders (do this first)
      • Subscribe to the imap folders you want to access in roundcube. Only subscribed folders are available for selection as 'special folders' in the next step.
    • Preferences
      • Select 'special folders' and set the values you want to use for 'Drafts', 'Sent', 'Junk' and 'Trash'
    • 'Identities'
      • Verify or create a default identity. Create a signature if you want to have one.

smeserver-scuttle

Scuttle - install as per wiki, works as expected 

- Needs to have package rebuilt for el5

smeserver-sitex

smeserver-sme7admin

should upgrade to smeserver-sme8admin 

yum install smeserver-sme8admin --enablerepo=smetest


smeserver-tf-b4rt

smeserver-theaddressbook

The Address Book - install as per wiki, works as expected

please take note of http://forums.corvalis.net/viewtopic.php?t=720&highlight=1054 if you have issues with groups 

- Needs to have package rebuilt for el5

smeserver-trean

smeserver-webshare

Webshare installs but breaks httpd.conf after creating the first webshare in server manager: 

Syntax error on line 1583 of /etc/httpd/conf/httpd.conf:
Invalid command 'AuthUserFile', perhaps misspelled or defined by a module not included in the server configuration

- All dependencies are in smecontribs, smeaddons or smeextras

There is a more detailed workaround explained here:

This workaround works fine on sme8.0 final.

These workarounds have been incorporated into a new package compatible with sme8.0, currently in the sme7 smetest repo, smeserver-webshare-1.0.0-10.el4.sme.noarch.rpm 

yum install --enablerepo=smetest smeserver-webshare

(manually enable this repo so your sme8 server can access it)

smeserver-wordpress

Install wordpress contrib from the SME7 repo: 

yum --enablerepo=sme7contribs --enablerepo=smecontribs install wordpress smeserver-wordpress

signal-event post-upgrade; signal-event reboot


Initial Setup 

To setup wordpress start your browser with the URL http://www.yourmaindomain/wordpress and complete the forms. 
To make basic setup just enter a blog name and an administrator email address then click Setup. 
On the next screen you will be presented with the admin user name and a randomly generated admin password. Record these somewhere safe now! 
Then click the Log in button, and enter your admin username (ie admin) and password (the ones just displayed on the previous screen). 
The initial setup is done in the Settings link at the top right corner of the blog screen. 
Configure as required, and save your changes before exiting.

Optional: If you want to change the domain URL that wordpress will be accessed with, apply any changes to the URL property before setting up wordpress, refer to options below, default is wordpress.


Upgrade Wordpress:

Download the 3.4.2 tar file from wordpress.org.

Put the tar file in /opt, extract it and adjust ownership if necessary. 

tar xvf wordpress-3.4.2.tar

chown -R root:root wordpress

Go to http://www.yourdomain/wordpress/wp-admin and choose yes to update the Wordpress database.

Now you'll be able to download themes and extract them in your /opt/wordpress/wp-content/themes directory and apply them in wp-admin.


Usage:

Normal access by bloggers -> www.yourdomain.com/wordpress/

Admin or backend user access -> www.yourdomain.com/wordpress/wp-login.php


Options:

*****THIS SECTION MAY NEED REVISION*****

  • You can fine tune access to wordpress with DB settings:

http://wiki.contribs.org/Web_Application_RPM#New_DB_settings

  • Local Settings:

The config file is now templated, so changes need to be made in a new fragment, eg: 

nano /etc/e-smith/templates/opt/wordpress/wp-config.php/05local

check which setting you want to change with: 

cat /opt/wordpress/wp-config-sample.php

then add the new setting in the new fragment and expand, it will overrule the old: 

expand-template /opt/wordpress/wp-config.php

If you think your setting should be the default, raise a bug.


Recommended Plugin (Akismet install):

Spam filtering is a popular plugin and recommended to prevent excessive spam being added to your wordpress blogsite. To configure the Akismet plugin offered by Wordpress do the following: 

Login as admin. 
Click on the Plugins link at top right of page. 
The Plugin Management page will appear, and a list of Inactive Plugins is shown. 
Check the tick box next to Akismet and then click on Activate 
To complete the process you will need to enter your Wordpress.com API key 
Click on the "enter your WordPress.com API key" link at the top of the page. 
If you do not already have a key, then click on the (Get your key) link. 
This will take you to the wordpress.com site. You need to create a new user account (if you don't already have one). 
Click the Signup link and enter required details. Select the option to create "Just a username please" and do not create a blog site at wordpress.com. 
You will receive a email confirmation to activate your account. 
After confirming your account creation, you will receive another email advising your new account details, and giving you the API key details. 
Return to the admin page of your new wordpress blog site and click on the Plugins link. 
Select Akismet configuration and enter your API key details. 
If preferred, tick the check box next to "Automatically discard spam comments on posts older than a month" 
Click the Update options button, and you should then see a confirmation notice that your key has been verified. 
Configure other Akismet settings as required. 
Save your changes, exit as admin user, and start using your blogsite.


Un-installation of Wordpress and removal of MySQL database:

1. To remove the package issue the following command on the SME Server shell: 

rpm -e wordpress smeserver-wordpress

2. Delete MySQL database: 

mysql
drop database wordpress;

3. Delete MySQL user: 

mysql
USE mysql;
DELETE FROM user WHERE user = 'wordpress';
FLUSH PRIVILEGES;

smeserver-zabbix-agent

smeserver-zabbix-proxy

smeserver-zabbix-server

Contribs not hosted on contribs.org

Working

cyrus-imap

cyrus-imap - install as per howto, works as expected Refer Forum post

Postgresql and sql-ledger

sql-ledger - install as per howto, works as expected [3]

smeserver-sogo

Sogo - install as per wiki, works as expected

SqueezeBoxServer

Install using the instructions in the howto. Note the advice that you should omit the sections 'Install Perl 5.10.0' and 'Patch Squeezebox server to use Perl5.10.0'.

SystemMonitor

SystemMonitor This is a version from Nethesis which comes very close to smeserver-sysmon functionality. Use deps from sme8contribs. Check: http://forums.contribs.org/index.php?topic=47882.new;topicseen#new

Note: a new version of smeserver-sysmon is now available from the sme8 contrib repo, check: http://bugs.contribs.org/show_bug.cgi?id=6333

smeserver-saco-qmHandle mail queue manager

smeserver-saco-qmHandle Installs OK on sme8.0 final as per wiki. Functionality OK although not extensively tested. This is the version originally from saco services, although at May 2012 the rpm cannot be found on their site. See http://mirror.contribs.org/contribs/rmitchell/smeserver/contribs/qmhandle/smeserver-saco-qmHandle-1.3.4-3.noarch.rpm

Retrieved from "https://wiki.koozali.org/index.php?title=SME8.0_Contribs_QA&oldid=19146"