OpenVPN Routed

Languages:

English

Is this article helpful to you?
Please consider donating or volunteering
Thank you!

Maintainer

Daniel B. from Firewall Services

Description

OpenVPN is a full-featured open source SSL VPN solution that accommodates a wide range of configurations, including remote access, site-to-site VPNs, Wi-Fi security, and enterprise-scale remote access solutions with load balancing, fail-over, and fine-grained access-controls. Starting with the fundamental premise that complexity is the enemy of security, OpenVPN offers a cost-effective, lightweight alternative to other VPN technologies that is well-targeted for the SME and enterprise markets.

This contrib will help you configuring OpenVPN in routed mode. With this mode, clients connecting to the VPN from the outside will get an IP in a virtual private network. (this network will use a separated IP range from your standard local network, unlike the OpenVPN_Bridge contrib

Requirements

• SME Server 8.0 (serveronly or server&gateway works)
• You may want to install PHPki to manage easily your certificates.

	Warning:
	The current version has mainly be written to allow smartphone device to be able to connect as bridge interface are not supported.

Installation

install the rpms

install fws repo, see : Fws

then :

yum  install smeserver-openvpn-routed --enablerepo=fws,smecontribs

Configure

This contribs is really minimal and doesn't have a panel to configure everything. You have to configure all by hand.

here's the file the contrib expects to see before being started:

• /etc/openvpn/routed/pub/cert.pem (the server certificate, in PEM format)
• /etc/openvpn/routed/pub/cacert.pem (the CA certificate, in PEM format)
• /etc/openvpn/routed/pub/dh.pem (Diffie-Helman parameters)
• /etc/openvpn/routed/priv/key.pem (the server private key)
• /etc/openvpn/routed/priv/takey.pem (an optional shared key)

If you already run the OpenVPN_Bridge contrib, you can just copy all the certificates:

cp -a /etc/openvpn/bridge/{priv,pub} /etc/openvpn/routed/

Using PHPki

If you are using the PHPki contrib to manage your certificates you need to do the following :

Create a new certificate for your OpenVPN server - make sure it is a server only certificate.

Make sure you use the ManagementPassword key from OpenVpn on the server.

config show openvpn-routed
 openvpn-routed=service
 ManagementPassword=SomeLongComplicatedPassword
 UDPPort=1194
 access=public
 status=enabled

From PHPki get the following certificates :

From the main page of PHPki :

dh pub/dh.pem - Download the Diffie-Hellman parameters
ca pub/cacert.pem - Download the Root Certificate

If you need to, get a copy of the revocation list

crl-verify pub/cacrl.pem - Download the Certificate Revocation List

The Revocation certificate can be obtained automatically with a cronjob

db configuration setprop openvpn-routed CrlUrl 'https://your-phpki-box.domain.net/phpki/index.php?stage=dl_crl_pem'

From the Manage Certificates page of PHPki :

cert pub/cert.pem - use the PEM Certificate
key priv/key.pem - use the PEM Key

Copy them to the relevant directories as above

Make sure that the certs are set 0600

If you want all your VPN clients to use the SME as default gateway once connected

db configuration setprop openvpn-routed RedirectGateway enabled
signal-event openvpn-routed-update

You can now add your Client certificates to your device.

Make sure you have a user on the server.

Make sure in your device that you choose Certificate + Password as an option.

Enter in your user name and password in addition to the certificates

Configure as running in parallel of bridge contrib

1. install
2. change port

config setprop openvpn-routed UDPPort 1195

1. copy bridge certificates

cp -a /etc/openvpn/bridge/{priv,pub} /etc/openvpn/routed/

1. if you want to change the default network range assigned (192.169.29.0)

db configuration setprop openvpn-routed Network 192.168.79.0/255.255.255.0

1. signale event to regenerate all you need

signal-event openvpn-routed-update

Client configuration - iOS

You can connect using the free OpenVPN Connect app. Unfortunately, configuring this app for your connection is a somewhat involved process. It will require creating or downloading a PKCS#12 file manually for the client, creating a .ovpn configuration file, installing the CA and client certificates on your iOS device, and finally importing the .ovpn configuration file into your device.

Create a PKCS#12 file for the client

A PKCS#12 file is used to bundle the client's private key with its associated certificates, and will be used to install an identity on your iOS device. PHPki has the ability to generate these files for download, but does not require a password for the client certificate if you have chosen the role of VPN client only when creating the certificate. iOS, however, requires a password to import a PKCS#12 file. If you entered a password when you created the client certificate, you can simply download the .p12 file from PHPki and import it using the instructions below. If you did not enter a password, you will need to create the PKCS#12 file manually. Begin by using PHPki to download a PEM bundle for the client. Log into the server-manager, go to Certificate Management, then to Manage Certificates, and click the download icon to the right of the client certificate you want to use. On the next screen, in the file type dropdown, choose PEM Bundle w/Root. Save this file to a convenient location and open it with your favorite text editor. It will look like this:

-----BEGIN PRIVATE KEY-----
MIIEwAIBADANBgkqhkiG9w0BAQEFAASCBKowggSmAgEAAoIBAQDhKd2tv7D6lnzs
...
P9sSy5mmpaI3o+vRt6fXYCvL37g=
-----END PRIVATE KEY-----
-----BEGIN CERTIFICATE-----
MIIGuzCCBKOgAwIBAgIDEAACMA0GCSqGSIb3DQEBBQUAMIHLMQswCQYDVQQGEwJV
...
ex7wHUDqk6zpdeygiuK8fYAbbeb7/9EGopKOPI8J+PPyaJ96ljqDK6FphY3Jt0k=
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
MIIHWjCCBUKgAwIBAgIJAPM30y+H/VCKMA0GCSqGSIb3DQEBBQUAMIHLMQswCQYD
...
Wx8wzFUHXwxOlYGsDRK9r/NTlPyiKwV9Z/kxVFSrFR7/FwCu8Ty4dSmsENk7xEzh
wAhb0RNq1QLkr/0K6KQ=
-----END CERTIFICATE-----

The first block is the client's private key, the second block is the client's certificate, and the third block is the CA certificate. You'll need to split these out into three files. Name them, for the sake of clarity, user.key, user.crt, and ca.crt. Save these three files in a location that's accessible to your SME server. Then you can actually create the PKCS#12 file using this command:

$ openssl pkcs12 -export -in user.crt -inkey user.key -certfile ca.crt -name MyClient -out client.p12

You may replace MyClient with whatever client name you wish. In processing this, openssl will ask for a password; you must enter one. When the system returns to the shell prompt, your client.p12 file will be ready to use.

Create .ovpn configuration file

The .ovpn configuration file tells the OpenVPN Connect client how to connect to your server. Begin by logging into the server-manager and going to OpenVPN-Bridge on the left sidebar. Click the button marked "Display a functional client configuration file." Copy the text that's shown into your favorite text editor and save it as client.ovpn. You'll then need to make some changes.

First, remove the first two lines. Second, on the first remaining line, change "dev tap" to "dev tun". This is required for iOS compatibility. Third, comment out or remove the line that says "pkcs12 user.p12". Third, change the line that says "remote" to read "remote yourserver.tld 1195 udp". Finally, add your CA certificate to the end of the file, like this:

 <ca>
 -----BEGIN CERTIFICATE-----
 MIIHWjCCBUKgAwIBAgIJAPM30y+H/VCKMA0GCSqGSIb3DQEBBQUAMIHLMQswCQYD
 VQQGEwJVUzEXMBUGA1UECBMOU291dGggQ2Fyb2xpbmExEzARBgNVBAcTCkhhcnRz
 ...
 Wx8wzFUHXwxOlYGsDRK9r/NTlPyiKwV9Z/kxVFSrFR7/FwCu8Ty4dSmsENk7xEzh
 wAhb0RNq1QLkr/0K6KQ=
 -----END CERTIFICATE-----
 </ca>

Save this file.

Install CA and client certificates on your iOS device

Email the ca.crt and client.p12 files to an account that your iOS device can reach using the built-in Mail app. Using the Mail app, open the message and tap on the ca.crt file to open it. The device will take you through the steps of installing the file, and once it is installed, will return you to the message. Then tap on the client.p12 file and follow the prompts to install it, including entering the password. Again, once it is installed, you'll be returned to the email message.

Importing .ovpn file and configuring connection

To configure the OpenVPN Connect app, you'll need to copy the .ovpn file to your device using iTunes. Open iTunes, select your device, and choose Apps from the left sidebar. In the right-hand frame, scroll down to the heading "The apps listed below can transfer documents between your iPhone and this computer". Under that heading, scroll down in the apps list and click on OpenVPN. Drag and drop the .ovpn file to the right-hand frame, under the heading "OpenVPN Documents."

This will take a moment to sync. Once that is completed, open the OpenVPN Connect app on your device. It will inform you that there's a new profile available for import. On that screen, tap the green + button.

The app will open the profile and indicate that it isn't associated with an identity by showing "None selected". Tap where it says "None selected" to choose an identity profile.

Next, the app will list your available identity profiles. Choose the one you want to associate with this OpenVPN connection.

Configuration is now complete. You can connect to your OpenVPN server using the slider on the screen.

Default key properties

these properties can be modified simply by issuing

config setprop openvpn-routed property newvalue

to reset to default, simply issue:

config delprop openvpn-routed property

where you have to replace property and newvalue with what you want.

db	Key	Type	Property	Default	Allowed	Description
configuration	openvpn-routed	service
			Protocol	udp	udp / tcp
			UDPPort	1194
			TCPPort	1194
			Authentication	CrtWithPass
			Network	192.168.29.0/255.255.255.0	user defined
			PushLocalNetworks	enabled	enabled / disabled
			RedirectGateway	disabled	enabled / disabled
			Mtu	none	[nnnn]
			Fragment	none
			DuplicateCN	disabled	enabled / disabled
			PassTOS	enabled	enabled / disabled
			Compression	enabled	enabled / disabled
			MaxClients	none	1 - 254
			ConfigRequired	disabled	enabled / disabled
			Verbose	3	[n]

Other articles in this category

Ipsec, Libreswan, Libreswan-xl2tpd, OpenVPN, OpenVPN Bridge, OpenVPN Bridge/fr, OpenVPN Routed, OpenVPN SiteToSite, SME Server wishlist, SoftEther VPN, Softethervpn-server, VPN, Wireguard