Difference between revisions of "SME8.0 Contribs QA"
Unnilennium (talk | contribs) |
Nicolatiana (talk | contribs) m (→Setup: Missing \ at the end of BaseUrl line) |
||
| Line 21: | Line 21: | ||
db yum_repositories set sme7contribs repository \ | db yum_repositories set sme7contribs repository \ | ||
GPGCheck yes \ | GPGCheck yes \ | ||
| − | BaseURL=http://mirror.contribs.org/releases/obsolete/7.6/smecontribs/$basearch/ | + | BaseURL=http://mirror.contribs.org/releases/obsolete/7.6/smecontribs/$basearch/ \ |
Name 'SME 7 - contribs' \ | Name 'SME 7 - contribs' \ | ||
Visible no \ | Visible no \ | ||
Revision as of 16:35, 10 June 2013
Version 8.0 Contrib testing
This document lists Contribs that have had been tested running under SME 8
Contribs should work if they are perl or php based. Some binary applications will work as well.
Please also see Contribs Bugreport
Test guidelines
Considerations_before_installing advises that Contribs for SME 8 have not yet been released, this is to avoid dev workload diagnosing bugs caused by contribs.
Please don't post sme 8 bugs unless you can replicate the bug with the contrib removed or isolated.
Setup
During the transition from SME7 to SME8, contrib packages will be migrated to the SME8 contrib repository. If the contrib is not yet in the SME8 Contrib repository and an entry in this Q&A suggests it will install properly then you will need to install the contrib from the SME7 repository.
Check to see if you already have the sme7contribs repository set up using the command:
db yum_repositories show sme7contribs
If it returns nothing then you will need to create a repo named sme7contribs, which points to the SME7 smecontribs repo
db yum_repositories set sme7contribs repository \ GPGCheck yes \ BaseURL=http://mirror.contribs.org/releases/obsolete/7.6/smecontribs/$basearch/ \ Name 'SME 7 - contribs' \ Visible no \ status disabled signal-event yum-modify yum clean all
The following shows an example of how to install a contrib from the SME7 repo:
yum --enablerepo=sme7contribs --enablerepo=smecontribs install smeserver-openvpn-s2s
Notice the additional phrase " --enablerepo=sme7contribs " in the command line.
Another example is as follows:
yum install smeserver-usbdisksmanager --enablerepo=sme7contribs --enablerepo=smecontribs
Contribs
List of Contribs being tested
Working available through SME8 smecontribs repo
smeserver-adv-samba
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-affa
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-arpwatch
Installed and running (ver: smeserver-arpwatch-0.1-2) in a semi-production environment (SME8b6)
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-awstats
AWStats - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-BackupPC
BackupPC install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
bugzilla:7281 see bugzilla if you can't backup with the smb protocol
smeserver-bridge-interface
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-dansguardian
Dansguardian - install as per wiki, works as expected
smeserver-dar2
Works as expected, although the built in backup to workstation has more functionality (and uses dar)
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-ddclient
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-denyhosts
Denyhosts - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-dimp
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-diskusage
Diskusage - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-durep
A new package will soon be available in sme8 contribs repo, check: http://wiki.contribs.org/Durep
- Installs OK and fully functional.
smeserver-ezmlm-web
Installed OK to sme8.0 final and setup one mailing list & tested, works OK, not extensively tested though
- All dependencies are in smecontribs (or from manually configured sme7contribs repo on sme8.0)
smeserver-fetchmail
Fetchmail installs as per wiki, version 1.3.6-17 works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-freepbx
Functionality hasn't been tested beyond ability to install AND update.
Needs atprms-repository configured. Install as per howto [1]
After installing I was able to update FreePBX from 2.6 to 2.9, the latest stable, by using the update function in the FreePBX web-interface. You will need to send some signal-event freepbx-update between versions update.
There are some udev errors while booting, claiming about invalid dahdi.rules. This seems not to be critical. I will post this to the bug-tracker.
smeserver-gollem
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-groupmembers-panel
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-hwinfo
Hardware Info - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-isoqlog *
isoqlog installs as per wiki,
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-jeta
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-kplaylist
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-Lazy_Admin_Tools *
lat installs as per wiki,
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-kronolith
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mailsorting
Smeserver-mailsorting - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mailstats
mailstats - sme-mailstats - Install as per wiki, Works as expected.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mimp
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mnemo
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mod_deflate
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mod_dav
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nag
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nfs
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-oats
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-openoffice-portable
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-openvpn-bridge
Install as per Wiki - Works as expected.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-openvpn-s2s
Install as per Wiki - Works as expected.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-phpki
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-phpldapadmin
Install as per Wiki - Works as expected.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-phpmyadmin
PHPMyAdmin - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
phpmyadmin 2 package too old, not supported with php 53, numerous deprecated function, will do a lot of buggy sql request DO NOT USE phpmyadmin 2, update immediatly to the newest package (phpmyadmin3.5)provided in smecontribs for SME8! see : This issue has now been fixed, check: http://bugs.contribs.org/show_bug.cgi?id=7088
smeserver-phpsysinfo
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-postgresql
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-print-monitor
LPRng print queue monitor - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-qmHandle *
fully working
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-qpsmtpd-spamassassinlevelstars
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-raidmonitor
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-rdiff-backup
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-remoteuseraccess
Smeserver-remoteuseraccess - install as per wiki, bash works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-rkhunter
rkhunter - Installed from contribs repo - seems to work fine afaict
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-sane
SANE - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-sarg
Sarg - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-sitemaker
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-sme8admin *
fully working
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-subversion
subversion Install as per Wiki - Works as expected in SME8b7
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-sysmon *
fully working
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-tw-logonscript
Smeserver-tw-logonscript Install as per Wiki - Works as expected.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-usbdisksmanager
fully working
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-userpanel
User-manager - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-userpanels
Smeserver-userpanels - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-vacation
Smeserver-vacation - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-wbl
Email#Email_WBL_server_manager_panel - Installs and runs fine as far as I can see.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-webconsole
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
- All dependencies are in smecontribs, smeaddons or smeextras see Webshare
smeserver-xinetd
fully working
- All dependencies are in smecontribs, smeaddons or smeextras
- new or returning contribs absent from SME7 repo
Working available through SME7 smecontribs repo in obsolete
smeserver-ajaxterm
Ajaxterm - install as per wiki, works as expected
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-bugzilla
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-cacti
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-ejabberd
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-gallery2
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-geneweb
Geneweb installs as per wiki and works as expected. Not thoroughly tested, but basic functionality (transfering a database form 7.5.1, uploading pictures, restricting access) is available
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-groupoffice
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-htbwshaper
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mediawiki
Functionality hasn't been tested beyond ability to install
Install using this post: testing Mediawiki 1.15.1 on SME 8 (may no longer be necessary)
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-mod_python
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nagios
Functionality hasn't been tested beyond ability to install - see Note Nagios about making this work in SME8 (needs to be rechecked with updated pacakges and dependencies)
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nagios-backup
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nagios-nrpe
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nagios-nsca
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-nagios-plugins-mysql
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-oscommerce
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-password
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
do what you need but there is a warning in the SME Server panel when you use it.bugzilla:7038 Stephdl (talk) 13:27, 4 February 2013 (MST)
smeserver-phpbb
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-phpwebftp
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-popfile
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
Functionality hasn't been tested beyond ability to install
by Jáder: I have installed it as by howto.
Just had to use "signal-event post-upgrade && signal-event reboot " because just "expand-template /etc/fstab" do not worked.
I found an error (will put on bugzilla): when creating a share with name longer than limit (12 as standard), just returns an generic ERROR and do not say the cause.
Other than that, it appears to be working I was able to copy to, read, del files.
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-smf
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-teamspeak-server
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-tftp-server
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-thinclient
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
Warning: The contrib allows to specify the TFTP server as "Self". This worked well under SME7 but not under SME8. To get this working under SME8, we had to choose the SME server's IP address to achieve the same result as "self" otherwise the clients cannot find/load from the TFTP server.
We have reported this as bug 6542 for the contrib but with this workaround, the contrib is working well under SME8.
smeserver-typo3
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-unjunkmgr
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-updates
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
Workarounds
Contribs that sort of work, but need improvement
smeserver-vmware
This contrib introduces a dependency that cannot be resolved and it is no longer necessary. Please see the Vmware wiki entry for complete installation and maintenance instructions for SME8.
smeserver-zarafa
Zarafa - Because of PHP 5.2.10 in SME8b5 WIP there is a problem with the mapi.so module, see bugzilla:5789:
Tested with:
- SME8b5 WIP - zarafa-6.40.0 RC2 - smeserver-zarafa-0.9.0-49.el4.sme
User WebSpace
This contribs work followin the steps described here [2]
but without php interpretation. to enable php for users we need to edit the templated istalled with the package:
/etc/e-smith/templates/etc/httpd/conf/httpd.conf/90e-smithAccess50userdir
and add the following lines:
AddType application/x-httpd-php .php .php3 .phtml AddType application/x-httpd-php-source .phps
in the fragment of code that define "Generic user dir access directive"
after that we expand the modified template and restart the service:
expand-template /etc/httpd/conf/httpd.conf
sv h /service/httpd-e-smith
i hope that this hint can help unexperienced users, REDTEO
Broken, not tested or missing dependencies
smeserver-coova-chilli
smeserver-dirty-tools
smeserver-ezmlm-www
smeserver-hylafax
Reported to be working in Forums: http://forums.contribs.org/index.php?topic=48498.new;topicseen#new
smeserver-jinzora
smeserver-joomla
smeserver-mailman
Mailman - Mailman contrib causes SME 8 bootstrap-console to hang (need retest after apache fix and dependency updates).
bugzilla:6693 Stephdl (talk) 13:29, 4 February 2013 (MST)
- All dependencies are in smecontribs, smeaddons or smeextras
smeserver-moodle
smeserver-ocsinventory
smeserver-photos
smeserver-phpmyadmin-multiuser
Functionality hasn't been tested beyond ability to install
- All dependencies are in smecontribs, smeaddons or smeextras
phpmyadmin package too old, not supported with php 53, numerous deprecated fucntion, will do a lot of buggy sql request DO NOT USE ! should be adapted to a phpmyadmin http://rpms.famillecollet.com/el5.i386/phpMyAdmin-3.5.2.1-1.el5.remi.noarch.rpm
NOTE: This issue has now been fixed, check: http://bugs.contribs.org/show_bug.cgi?id=7088
smeserver-roundcube
Works for me as follows:
- install from sme7contribs:
yum enablerepo=sme7contribs install smeserver-roundcube signal-event post-upgrade; signal-event reboot
At this point, attempting to open roundcube generates the following error in /var/log/messages:
httpd: PHP Fatal error: Cannot redeclare quoted_printable_encode() in /opt/roundcube/program/include/rcube_imap.inc on line 2656
- download the latest sources from sourceforge (0.7.1 as of this writing):
- browse to http://sourceforge.net/projects/roundcubemail/ - click the download button - right-click the 'direct link' url in the download page header, and select 'copy link location' - at a shell prompt on the sme server:
wget <paste link location>
- extract the downloaded source (replace "roundcubemail-0.7.1.tar.gz" with the actual filename downloaded in step 2):
tar zxvf roundcubemail-0.7.1.tar.gz
- copy extracted roundcube code on top of the code that was installed by the rpm:
'cp' -rf roundcubemail-0.7.1/* /opt/roundcube
- Drop and re-create all roundcube tables from mysql (If you're updating an existin roundcube installation you'll need to manually figure out which of the commands in /opt/roundcube/SQL/mysql.update.sql)
mysqldump --add-drop-table --no-data roundcube |grep ^DROP |mysql roundcube cd /opt/roundcube mysql roundcube < SQL/mysql.initial.sql
Note: drop all tables using mysqldump courtesy of http://www.thingy-ma-jig.co.uk/comment/7075
Roundcube now opens at http://<my.smeserver.tld>/roundcube
- Configuration changes (for each user):
- login and select "Settings" from the top right
- Folders (do this first)
- Subscribe to the imap folders you want to access in roundcube. Only subscribed folders are available for selection as 'special folders' in the next step.
- Preferences
- Select 'special folders' and set the values you want to use for 'Drafts', 'Sent', 'Junk' and 'Trash'
- 'Identities'
- Verify or create a default identity. Create a signature if you want to have one.
smeserver-scuttle
Scuttle - install as per wiki, works as expected
- Needs to have package rebuilt for el5
smeserver-sitex
smeserver-tf-b4rt
smeserver-theaddressbook
The Address Book - install as per wiki, works as expected
please take note of http://forums.corvalis.net/viewtopic.php?t=720&highlight=1054 if you have issues with groups
- Needs to have package rebuilt for el5
smeserver-trean
smeserver-wordpress
Install wordpress contrib from the SME7 repo:
yum --enablerepo=sme7contribs --enablerepo=smecontribs install wordpress smeserver-wordpress
signal-event post-upgrade; signal-event reboot
Initial Setup
To setup wordpress start your browser with the URL http://www.yourmaindomain/wordpress and complete the forms. To make basic setup just enter a blog name and an administrator email address then click Setup. On the next screen you will be presented with the admin user name and a randomly generated admin password. Record these somewhere safe now! Then click the Log in button, and enter your admin username (ie admin) and password (the ones just displayed on the previous screen). The initial setup is done in the Settings link at the top right corner of the blog screen. Configure as required, and save your changes before exiting.
Optional: If you want to change the domain URL that wordpress will be accessed with, apply any changes to the URL property before setting up wordpress, refer to options below, default is wordpress.
Upgrade Wordpress:
Download the 3.4.2 tar file from wordpress.org.
Put the tar file in /opt, extract it and adjust ownership if necessary.
tar xvf wordpress-3.4.2.tar
chown -R root:root wordpress
Go to http://www.yourdomain/wordpress/wp-admin and choose yes to update the Wordpress database.
Now you'll be able to download themes and extract them in your /opt/wordpress/wp-content/themes directory and apply them in wp-admin.
Usage:
Normal access by bloggers -> www.yourdomain.com/wordpress/
Admin or backend user access -> www.yourdomain.com/wordpress/wp-login.php
Options:
*****THIS SECTION MAY NEED REVISION*****
- You can fine tune access to wordpress with DB settings:
http://wiki.contribs.org/Web_Application_RPM#New_DB_settings
- Local Settings:
The config file is now templated, so changes need to be made in a new fragment, eg:
nano /etc/e-smith/templates/opt/wordpress/wp-config.php/05local
check which setting you want to change with:
cat /opt/wordpress/wp-config-sample.php
then add the new setting in the new fragment and expand, it will overrule the old:
expand-template /opt/wordpress/wp-config.php
If you think your setting should be the default, raise a bug.
Recommended Plugin (Akismet install):
Spam filtering is a popular plugin and recommended to prevent excessive spam being added to your wordpress blogsite. To configure the Akismet plugin offered by Wordpress do the following:
Login as admin. Click on the Plugins link at top right of page. The Plugin Management page will appear, and a list of Inactive Plugins is shown. Check the tick box next to Akismet and then click on Activate To complete the process you will need to enter your Wordpress.com API key Click on the "enter your WordPress.com API key" link at the top of the page. If you do not already have a key, then click on the (Get your key) link. This will take you to the wordpress.com site. You need to create a new user account (if you don't already have one). Click the Signup link and enter required details. Select the option to create "Just a username please" and do not create a blog site at wordpress.com. You will receive a email confirmation to activate your account. After confirming your account creation, you will receive another email advising your new account details, and giving you the API key details. Return to the admin page of your new wordpress blog site and click on the Plugins link. Select Akismet configuration and enter your API key details. If preferred, tick the check box next to "Automatically discard spam comments on posts older than a month" Click the Update options button, and you should then see a confirmation notice that your key has been verified. Configure other Akismet settings as required. Save your changes, exit as admin user, and start using your blogsite.
Un-installation of Wordpress and removal of MySQL database:
1. To remove the package issue the following command on the SME Server shell:
rpm -e wordpress smeserver-wordpress
2. Delete MySQL database:
mysql drop database wordpress;
3. Delete MySQL user:
mysql USE mysql; DELETE FROM user WHERE user = 'wordpress'; FLUSH PRIVILEGES;
smeserver-zabbix-agent
smeserver-zabbix-proxy
smeserver-zabbix-server
won't be updated
smeserver-nagiosgrapher
you should upgrade to smeserver-nagios
smeserver-php5-cgi
No longer required as php5 is in SME 8 base should also be uninstalled from sme7 for security reasons.
see http://forums.contribs.org/index.php/topic,47647.0.html and also http://bugs.contribs.org/show_bug.cgi?id=6652
smeserver-sme7admin
should upgrade to smeserver-sme8admin
yum install smeserver-sme8admin --enablerepo=smetest
Contribs not hosted on contribs.org
Working
cyrus-imap
cyrus-imap - install as per howto, works as expected Refer Forum post
Postgresql and sql-ledger
sql-ledger - install as per howto, works as expected [3]
smeserver-sogo
Sogo - install as per wiki, works as expected
SqueezeBoxServer
Install using the instructions in the howto. Note the advice that you should omit the sections 'Install Perl 5.10.0' and 'Patch Squeezebox server to use Perl5.10.0'.
SystemMonitor
SystemMonitor This is a version from Nethesis which comes very close to smeserver-sysmon functionality. Use deps from sme8contribs. Check: http://forums.contribs.org/index.php?topic=47882.new;topicseen#new
Note: a new version of smeserver-sysmon is now available from the sme8 contrib repo, check: http://bugs.contribs.org/show_bug.cgi?id=6333
smeserver-saco-qmHandle mail queue manager
smeserver-saco-qmHandle Obsolete, please rather install smeserver-qmHandle that is in sme8 contribs repository
not listed above but with a wiki page
ajaxplorer sme8*
apache tomcat
atftp server
automysqlbackup sme8*
crontab manager
Dansguardian-stats
DSPAM
egroupware
smeserver-fuse
smeserver-git sme8*
smeserver-gitweb sme8*
smeserver-gitweb-theme sme8*
smeserver-learn
lemon-LDAP
logwatch ( not a contribs but external package without customisation available in smeaddons)
smeserver-openupload
smeserver-ipp2p
smeserver-phplist
sail
sail and LDAP
scarab +> dead
service_control
smeserver-tt-rss sme88
smeserver-trac
smeserver-webfilter
