Thinclient

From SME Server
Jump to navigation Jump to search


smeserver-thinclient

Maintainer: Trevor Batley
Current version: 2.0-5

Description

This contribution adds a server manager panel that allows an administrator to manage thinclient workstations (ie. workstations that are using the pxeboot protocol to retrieve a boot image from the server).

For usage see this page.

Requirements

  • smeserver >= 7.0
  • The thinclient workstations are receiving their dhcp info from your smeserver.
  • A tftp-server, either on your smeserver or another server in your domain (I have also created a contrib to install a tftp server on your smeserver).
  • The thinclient workstations have a PXE capable NIC and BIOS. (although booting from floppy & CD is possible. Please refer to the documentation of your thinclient OS).

Installation

This contrib is currently held in the smedev repository, so the following commands will install on your smeserver.

yum --enablerepo=smedev install smeserver-thinclient

You will then need to activate the database changes etc. The 'official' way is to perform

signal-event post-upgrade
signal-event reboot

Go to the Thin Clients panel on Server Manager (within the Configuration section) and activate etc.

 

Upgrade from smeserver 6.x

There is no 'official' upgrade for thinclient from smeserver 6.x to 7.x, but if you:

  • uninstall the current version before upgrading to smeserver 7.x (rpm -e smeserver-thinclient) and
  • install the newer version after your upgrade (as per install),

you just need to leave everything in your /tftpboot/ directory and move the /home/e-smith/pxeclients file across to /home/e-smith/db/thinclient. eg.

mv /home/e-smith/pxeclients /home/e-smith/db/thinclient

Activate via the server manager panel and everything should still be there.

Uninstall

yum remove smeserver-thinclient

Source

The source for this contrib can be found in the smeserver CVS on sourceforge.

A copy is held in my contribs directory

Bugs

Please raise bugs under the SME-Contribs section in bugzilla and select the smeserver-thinclient component.