Difference between revisions of "Libreswan"

From SME Server
Jump to navigationJump to search
 
(17 intermediate revisions by 3 users not shown)
Line 6: Line 6:
 
Whilst the contribs do their best to make sure there is a simple secure setup, I make no guarantees !
 
Whilst the contribs do their best to make sure there is a simple secure setup, I make no guarantees !
  
−
Where possible use RSA keys instead of passwords.
+
Where possible use RSA keys or certificates instead of passwords.
 
   
 
   
 
An alternative solution is https://wiki.contribs.org/OpenVPN_SiteToSite or https://wiki.contribs.org/OpenVPN_Bridge  
 
An alternative solution is https://wiki.contribs.org/OpenVPN_SiteToSite or https://wiki.contribs.org/OpenVPN_Bridge  
  
−
Where possible avoid the use of PPTP as it was cracked a long time ago and is very easy to read }}
+
Where possible avoid the use of PPTP as it was cracked a long time ago and is very easy to read
 +
 
 +
With IKE v2 it is possible to allow dial in clients.
 +
 
 +
For older dial clients you can also look at https://wiki.contribs.org/Smeserver-libreswan-xl2tpd
 +
}}
  
 
=== Version ===
 
=== Version ===
−
====SME8====
+
====Koozali SME v8====
  
 
<div style="background: #EFE9E9; border: 1px solid #AAA; padding: 5px; padding-bottom: 17px; margin: 5px; width: 97%">
 
<div style="background: #EFE9E9; border: 1px solid #AAA; padding: 5px; padding-bottom: 17px; margin: 5px; width: 97%">
Line 22: Line 27:
 
   <div>Please use the version of openswan in the ReetP repo as below</div>
 
   <div>Please use the version of openswan in the ReetP repo as below</div>
 
</div>
 
</div>
−
{{ #smeversion: smeserver-openswan}}
+
 
−
====SME9====
+
 
 +
====Koozali SME v9====
 
{{ #smeversion: libreswan}}
 
{{ #smeversion: libreswan}}
 
{{ #smeversion: smeserver-libreswan}}
 
{{ #smeversion: smeserver-libreswan}}
Line 47: Line 53:
  
 
==Installation==
 
==Installation==
−
= '''For Koozali SME8''' =
+
= For Koozali SME10 =
 +
For Koozali SME Server 10, the latest stable Libreswan can be found in the default repo's
 +
 
 +
Note that the contrib is currently in test so to install:
 +
yum install smeserver-extrarepositories-libreswan -y
 +
db yum_repositories setprop libreswan status enabled Priority 10
 +
signal-event yum-modify
 +
yum --enablerepo=smecontribs,smetest install smeserver-libreswan
 +
 
 +
Configuration options and notes are here (check the latest branch):
 +
=For Koozali SME8=
 
For Koozali SME Server 8 you will need the [https://wiki.contribs.org/User:ReetP ReetP] repo to install openswan
 
For Koozali SME Server 8 you will need the [https://wiki.contribs.org/User:ReetP ReetP] repo to install openswan
 +
{{:Reetspetit|transcludesection=SME9}}
 +
 +
signal-event yum-modify
  
−
yum --enablerepo=smecontribs,epel,reetp install smeserver-openswan
+
Note that the contrib is currently in test so to install:
 +
yum --enablerepo=smetest,reetp install smeserver-openswan
  
 
Configuration options and notes are here (check the latest branch):
 
Configuration options and notes are here (check the latest branch):
Line 56: Line 76:
 
https://github.com/reetp/smeserver-openswan
 
https://github.com/reetp/smeserver-openswan
  
 +
Please note that this version is no longer under development as SME v8 is EOL at the end of March 2017
  
−
= '''For Koozali SME9''' =
+
It is possible to use Openswan on SME v9 but I do not have the time to maintain the contrib for both versions.
−
For Koozali SME Server 9, Libreswan can be found in the default repo's, so to install Libreswan simply enter the following command:
+
RedHat have swapped to using Libreswan as their default IPsec implementation.
  
−
yum --enablerepo=smecontribs,epel install smeserver-libreswan
+
= For Koozali SME9 =
 +
For Koozali SME Server 9, the latest stable Libreswan can be found in the default repo's
 +
 
 +
Note that the contrib is currently in test so to install:
 +
yum --enablerepo=smetest install smeserver-libreswan
  
 
Configuration options and notes are here (check the latest branch):
 
Configuration options and notes are here (check the latest branch):
Line 66: Line 91:
 
https://github.com/reetp/smeserver-libreswan
 
https://github.com/reetp/smeserver-libreswan
  
−
{{Note box|I usually have the the latest version of libreswan in my own repo https://wiki.contribs.org/User:ReetP
+
{{Note box|You can get the latest version of libreswan itself here }}
  
−
Use at your own risk !}}
+
/sbin/e-smith/db yum_repositories set libreswan repository \
 +
BaseURL https://download.libreswan.org/binaries/rhel/6/x86_64/ \
 +
EnableGroups no \
 +
GPGCheck yes \
 +
GPGKey https://download.libreswan.org/binaries/RPM-GPG-KEY-libreswan \
 +
Name LibreSwan \
 +
Visible yes \
 +
status disabled \
 +
 
 +
signal-event yum-modify
 +
 
 +
yum --enablerepo=libreswan install libreswan
  
 
<headertabs />
 
<headertabs />
  
−
==IPSEC server to server configuration==
+
 
−
Openswan/IPSEC can be used to setup a secure and permanent VPN connection between a SME Server and another (local or remote) IPSEC enabled device such as a router.
+
=IPSEC server to server configuration=
 +
 
 +
Libreswan/Openswan/IPSEC can be used to setup a secure and permanent VPN connection between a SME Server and another (local or remote) IPSEC enabled device such as a router.
  
 
Note - if you want to use with an online VPS set the server to server/gateway with a 'dummy' internal network adaptor.
 
Note - if you want to use with an online VPS set the server to server/gateway with a 'dummy' internal network adaptor.
  
 
===Passwords===
 
===Passwords===
 +
 
It is recommended to create a very strong random password and keep this safe. One way of generating and store a random strong password is explained [http://wiki.contribs.org/Useful_Commands#Generating_strong_random_password '''here''']
 
It is recommended to create a very strong random password and keep this safe. One way of generating and store a random strong password is explained [http://wiki.contribs.org/Useful_Commands#Generating_strong_random_password '''here''']
  
−
Alternatively see RSA key section below for much stronger passwords
+
Alternatively see RSA key and Certificate sections below for much stronger passwords
 +
 
 +
 
 +
===Setup PSK Passwords===
 +
 
 +
The contrib has a lot of configurable settings but with the defaults and a few details it should just work.
 +
 
 +
General settings and some defaults are stored in the main config DB
  
−
===Settings===
+
config show ipsec
  
−
The contrib has a lot of configurable settings but with the defaults and few details it should just work
+
Connection specific settings are stored in a separate DB
  
−
config setprop ipsec status enabled access public
+
db ipsec_connections show
  
−
Note for ipsec_connections we use 'set' when we create new connection. Thereafter you can modify it with setprop.
+
{{Note box|For ipsec_connections we use 'set' when we create a new connection. Thereafter you can modify it with setprop}}
  
−
Note most people refer to East and West rather than Local and Remote. There is a very good reason for this if you start using RSA keys !
+
{{Note box|Most people refer to East and West rather than Local and Remote. There is a very good reason for this if you start using RSA keys !}}
  
 
Server East - WAN IP 5.6.7.8 Local IP 192.168.20.1 Subnet 192.168.20.0/24
 
Server East - WAN IP 5.6.7.8 Local IP 192.168.20.1 Subnet 192.168.20.0/24
Line 99: Line 145:
  
 
  signal-event ipsec-update
 
  signal-event ipsec-update
 +
 +
 +
 +
===Setup RSA Keys===
 +
 +
For the better security it is recommended to use RSA keys.
 +
 +
There are notes on github as this can be quite lengthy
 +
 +
https://github.com/reetp/smeserver-libreswan/blob/master/IpsecSettings.txt
 +
 +
A basic ipsec_connections entry setup should look this - note it will need a matching setup at the other end):
 +
 +
MyEast=ipsec
 +
    leftsourceip=192.168.20.1
 +
    leftsubnet=192.168.20.0/24
 +
    right=1.2.3.4
 +
    rightsubnet=10.0.0.0/24
 +
    security=rsasig
 +
    leftid=East
 +
    rightid=West
 +
    leftrsasig=SomeLongPassFromEast
 +
    rightrsasig=SomeLongPasswordFromWest
 +
    status enabled
 +
 +
 +
===Setup Certificates===
 +
 +
You can now use a CA and PKCS#12 certificates.
 +
 +
There are notes on github as this can be quite lengthy
 +
 +
https://github.com/reetp/smeserver-libreswan/blob/master/ipsec-certificate-notes.txt
 +
 +
First setup the certificate store
 +
 +
ipsec checknss
 +
 +
Import the cert
 +
 +
ipsec import mycertificate.p12
 +
 +
Check the store
 +
 +
certutil -L -d sql:/etc/ipsec.d
 +
 +
A basic ipsec_connections entry setup should look this:
 +
 +
MyEast=ipsec
 +
    leftcert=LocalServer
 +
    leftsourceip=192.168.1.1
 +
    leftsubnet=192.168.1.0/24
 +
    right=5.6.7.8
 +
    rightcert=RemoteServer
 +
    rightsubnet=192.168.100.0/24
 +
    security=certs
 +
    status=enabled
 +
 +
===DB Keys===
 +
 +
There are a lot of keys involved in ipsec.
 +
 +
Where possible just use the minimum that you require depending on whether you want PSK password / RSA signature / Certificate security
 +
 +
There are notes on github as this can be quite lengthy
 +
 +
https://github.com/reetp/smeserver-libreswan/blob/master/IpsecSettings.txt
 +
 +
Here are the currently available settings and options:
 +
 +
 +
====IPsec settings====
 +
 +
These settings are generic and can be overwritten on a per connection basis
 +
 +
config ipsec show
 +
 +
Only set with:
 +
db configuration setprop ipsec $key $property
 +
 +
Setting status enabled/disabled will modify access to private/public
 +
 +
status: Default disabled | enabled
 +
access: Default private | public
 +
UDPPorts: Default 500,4500 | Variable
 +
auto: Default start | add (do not use ondemand or ignore)
 +
debug: none | all raw crypt parsing emitting control controlmore lifecycle dns dpd klips pfkey natt oppo oppoinfo whackwatch private
 +
(all generates a LARGE amount of logging so use with care)
 +
 +
 +
====General Settings====
 +
 +
Overall default settings - these can be in main config db or set per connection in db ipsec_connections
 +
 +
security: secret | rsasig | certs
 +
ikelifetime: Default 3600s | Variable
 +
salifetime: Default 28800s | Variable
 +
dpdaction: Default restart | Variable
 +
dpddelay: Default 30 | Variable
 +
dpdtimeout: Default 10 | Variable
 +
pfs: Default yes | Variable
 +
connectiontype: Default secret | rassig, certificate
 +
ike: Default aes-sha1 | Variable - see ipsec.conf readme file for more options - sample: aes256-sha2;dh14 or aes256-sha2;modp2048
 +
ipsecversion: Default permit | Whether to allow ikev2 - also : insist/propose/yes/never/no
 +
 +
====Per connection settings====
 +
 +
{{Warning box|Automatically modified - do not change this
 +
PreviousState: Denotes previous connection state
 +
}}
 +
 +
Manual keys
 +
 +
db ipsec_connections show
 +
 +
db ipsec_connections setprop ConnectionName $key $property
 +
 +
iptype: Default Empty | stattodyn or dyntostat - are we a static host to dynamic client or vice versa ? - Only required for dynamic clients with static hosts
 +
connectiontype: Default tunnel | transport/passthrough/drop/reject
 +
leftrsasig: Default Empty | Your Local rsasignature key
 +
rightrsasig: Default Empty | Your Remote rsasignature key
 +
ipsecversion: Default permit | Whether to allow ikev2 - also : insist/propose/yes/never/no
 +
ike: Default aes-sha1 | Variable - sample: aes256-sha2;dh14 or aes256-sha2;modp2048
 +
phase2: Default aes-sha1 | Variable - sample: aes256-sha2;dh14 or aes256-sha2;modp2048
 +
mtu: Default Empty | Variable
 +
left: Default Empty | If Empty then %defaultroute is set. Can be local WAN IP
 +
leftid: Default Empty | Variable
 +
leftsourceip:  Default Empty | This server local IP
 +
leftsubnet:  Default Empty | This server local subnet
 +
right: Default Empty | Destination WAN IP
 +
rightid: Default Empty | Variable
 +
rightsubnet: Default Empty | Destination subnet
 +
passwd: Default Empty | Variable
 +
keyingtries: Default Empty | 0 is default - 'forever'
 +
leftcert Default Empty | LeftCertName
 +
rightcert Default Empty | RightCertName
 +
 +
For certificates - do not set or leave the following empty:
 +
 +
leftrsasig: Default Empty - system generates %cert
 +
rightrsasig: Default Empty - system generates %cert
 +
leftid: Default Empty - system generates %fromcert
 +
rightid: Default Empty - system generates %fromcert
  
 
===Logs and Debug===
 
===Logs and Debug===
 +
 +
{{Warning box| If you are trying to connect Libreswan to other *swan versions using IPsec v2 you may see this in the logs
 +
"failed to match authenticator"
 +
which may cause link failures.
 +
This seems to be an issue with some *swan versions - see this thread for more
 +
https://lists.libreswan.org/pipermail/swan/2017/001956.html}}
  
 
The following will give you connection details.  
 
The following will give you connection details.  
Line 121: Line 316:
 
You may find masq needs a restart sometimes
 
You may find masq needs a restart sometimes
  
−
/etc/init.d/masq restart
+
/etc/init.d/masq restart
  
 
Check /var/log/iptables/current to see if packets are getting blocked.
 
Check /var/log/iptables/current to see if packets are getting blocked.
  
 
For ipsec itself place to look is /var/log/pluto/pluto.log
 
For ipsec itself place to look is /var/log/pluto/pluto.log
−
 
  
 
If you need more debugging you can set plutodebug = all
 
If you need more debugging you can set plutodebug = all
−
 
−
=== RSA Keys===
 
−
 
−
For the better security it is recommended to use RSA keys. There is more on this on the github page https://github.com/reetp/smeserver-libreswan/blob/master/IpsecSettings.txt
 
  
  
Line 146: Line 336:
 
{{#bugzilla:columns=id,product,version,status,summary |sort=id |order=desc |component=smeserver-libreswan|noresultsmessage="No open bugs found."}}
 
{{#bugzilla:columns=id,product,version,status,summary |sort=id |order=desc |component=smeserver-libreswan|noresultsmessage="No open bugs found."}}
  
−
==Other articles in this category==
+
=Other articles in this category=
 
{{#ask: [[Category:VPN]]}}
 
{{#ask: [[Category:VPN]]}}
  

Latest revision as of 13:54, 9 July 2024

Is this article helpful to you?
Please consider donating or volunteering
Thank you!


Warning.png Warning:
Note that you should try and learn as much as you can about VPN, Ipsec, and Security in general before playing with this. You risk leaving your server exposed to the bad guys.

Whilst the contribs do their best to make sure there is a simple secure setup, I make no guarantees !

Where possible use RSA keys or certificates instead of passwords.

An alternative solution is https://wiki.contribs.org/OpenVPN_SiteToSite or https://wiki.contribs.org/OpenVPN_Bridge

Where possible avoid the use of PPTP as it was cracked a long time ago and is very easy to read

With IKE v2 it is possible to allow dial in clients.

For older dial clients you can also look at https://wiki.contribs.org/Smeserver-libreswan-xl2tpd


Version

Koozali SME v8

Centos 5:
openswan
Please use the version of openswan in the ReetP repo as below


Koozali SME v9

Alpha 10:
Contrib 9:
libreswan
The latest version of libreswan is available in the SME repository, click on the version number(s) for more information.


Devel 10:
Devel 9:
Contrib 9:
smeserver-libreswan
The latest version of smeserver-libreswan is available in the SME repository, click on the version number(s) for more information.


About

Openswan

Openswan.jpg

Openswan is a free implementation of IPsec & IKE for Linux. IPsec is the Internet Protocol Security and uses strong cryptography to provide both authentication and encryption services. These services allow you to build secure tunnels through untrusted networks. Everything passing through the untrusted net is encrypted by the ipsec gateway machine and decrypted by the gateway at the other end of the tunnel.The resulting tunnel is a virtual private network or VPN.

Libreswan

Libreswan is a free software implementation of the most widely supported and standarized VPN protocol based on ("IPsec") and the Internet Key Exchange ("IKE"). These standards are produced and maintained by the Internet Engineering Task Force ("IETF").

Note that Libreswan will become the default ipsec installation from CentOS 6.8

https://libreswan.org/wiki/HOWTO:_openswan_to_libreswan_migration

  • Credits: John Crisp
  • Discuss: This How-to can be discussed on the forums here


Installation

[edit]

For Koozali SME Server 10, the latest stable Libreswan can be found in the default repo's

Note that the contrib is currently in test so to install: 

yum install smeserver-extrarepositories-libreswan -y
db yum_repositories setprop libreswan status enabled Priority 10
signal-event yum-modify
yum --enablerepo=smecontribs,smetest install smeserver-libreswan

Configuration options and notes are here (check the latest branch):

For Koozali SME Server 8 you will need the ReetP repo to install openswan 

db yum_repositories set reetp repository \
BaseURL https://reetspetit.com/smeserver/\$releasever \
EnableGroups no GPGCheck no \
Name "Mirror John Crisp reetspetit.com" \
GPGKey https://reetspetit.com/RPM-GPG-KEY \
Visible yes status disabled




signal-event yum-modify

Note that the contrib is currently in test so to install: 

yum --enablerepo=smetest,reetp install smeserver-openswan

Configuration options and notes are here (check the latest branch):

https://github.com/reetp/smeserver-openswan

Please note that this version is no longer under development as SME v8 is EOL at the end of March 2017

It is possible to use Openswan on SME v9 but I do not have the time to maintain the contrib for both versions. RedHat have swapped to using Libreswan as their default IPsec implementation.

For Koozali SME Server 9, the latest stable Libreswan can be found in the default repo's

Note that the contrib is currently in test so to install: 

yum --enablerepo=smetest install smeserver-libreswan

Configuration options and notes are here (check the latest branch):

https://github.com/reetp/smeserver-libreswan


Important.png Note:
You can get the latest version of libreswan itself here 


/sbin/e-smith/db yum_repositories set libreswan repository \
BaseURL https://download.libreswan.org/binaries/rhel/6/x86_64/ \
EnableGroups no \
GPGCheck yes \
GPGKey https://download.libreswan.org/binaries/RPM-GPG-KEY-libreswan \
Name LibreSwan \
Visible yes \
status disabled \

signal-event yum-modify

yum --enablerepo=libreswan install libreswan


IPSEC server to server configuration

Libreswan/Openswan/IPSEC can be used to setup a secure and permanent VPN connection between a SME Server and another (local or remote) IPSEC enabled device such as a router.

Note - if you want to use with an online VPS set the server to server/gateway with a 'dummy' internal network adaptor.

Passwords

It is recommended to create a very strong random password and keep this safe. One way of generating and store a random strong password is explained here

Alternatively see RSA key and Certificate sections below for much stronger passwords


Setup PSK Passwords

The contrib has a lot of configurable settings but with the defaults and a few details it should just work.

General settings and some defaults are stored in the main config DB 

config show ipsec

Connection specific settings are stored in a separate DB 

db ipsec_connections show


Important.png Note:
For ipsec_connections we use 'set' when we create a new connection. Thereafter you can modify it with setprop



Important.png Note:
Most people refer to East and West rather than Local and Remote. There is a very good reason for this if you start using RSA keys !


Server East - WAN IP 5.6.7.8 Local IP 192.168.20.1 Subnet 192.168.20.0/24 

db ipsec_connections set MyEast ipsec status enabled leftsourceip 192.168.20.1 leftsubnet 192.168.20.0/24 right 1.2.3.4 rightsubnet 10.0.0.0/24 passwd MyPassWd

Server West- WAN IP 1.2.3.4 Local IP 10.0.0.1 Subnet 10.0.0.0/24 

db ipsec_connections set MyWest ipsec status enabled leftsourceip 10.0.0.1 leftsubnet 10.0.0.0/24 right 5.6.7.8 rightsubnet 192.168.20.0/24 passwd MyPassWd

signal-event ipsec-update


Setup RSA Keys

For the better security it is recommended to use RSA keys.

There are notes on github as this can be quite lengthy

https://github.com/reetp/smeserver-libreswan/blob/master/IpsecSettings.txt

A basic ipsec_connections entry setup should look this - note it will need a matching setup at the other end): 

MyEast=ipsec 
   leftsourceip=192.168.20.1
   leftsubnet=192.168.20.0/24
   right=1.2.3.4
   rightsubnet=10.0.0.0/24
   security=rsasig
   leftid=East
   rightid=West
   leftrsasig=SomeLongPassFromEast
   rightrsasig=SomeLongPasswordFromWest
   status enabled


Setup Certificates

You can now use a CA and PKCS#12 certificates.

There are notes on github as this can be quite lengthy

https://github.com/reetp/smeserver-libreswan/blob/master/ipsec-certificate-notes.txt

First setup the certificate store 

ipsec checknss

Import the cert 

ipsec import mycertificate.p12

Check the store 

certutil -L -d sql:/etc/ipsec.d

A basic ipsec_connections entry setup should look this: 

MyEast=ipsec
   leftcert=LocalServer
   leftsourceip=192.168.1.1
   leftsubnet=192.168.1.0/24
   right=5.6.7.8
   rightcert=RemoteServer
   rightsubnet=192.168.100.0/24
   security=certs
   status=enabled

DB Keys

There are a lot of keys involved in ipsec.

Where possible just use the minimum that you require depending on whether you want PSK password / RSA signature / Certificate security

There are notes on github as this can be quite lengthy

https://github.com/reetp/smeserver-libreswan/blob/master/IpsecSettings.txt

Here are the currently available settings and options:


IPsec settings

These settings are generic and can be overwritten on a per connection basis

config ipsec show

Only set with: db configuration setprop ipsec $key $property

Setting status enabled/disabled will modify access to private/public 

status: Default disabled | enabled
access: Default private | public
UDPPorts: Default 500,4500 | Variable
auto: Default start | add (do not use ondemand or ignore)
debug: none | all raw crypt parsing emitting control controlmore lifecycle dns dpd klips pfkey natt oppo oppoinfo whackwatch private

(all generates a LARGE amount of logging so use with care)


General Settings

Overall default settings - these can be in main config db or set per connection in db ipsec_connections 

security: secret | rsasig | certs
ikelifetime: Default 3600s | Variable
salifetime: Default 28800s | Variable
dpdaction: Default restart | Variable
dpddelay: Default 30 | Variable
dpdtimeout: Default 10 | Variable
pfs: Default yes | Variable
connectiontype: Default secret | rassig, certificate
ike: Default aes-sha1 | Variable - see ipsec.conf readme file for more options - sample: aes256-sha2;dh14 or aes256-sha2;modp2048
ipsecversion: Default permit | Whether to allow ikev2 - also : insist/propose/yes/never/no

Per connection settings

Warning.png Warning:
Automatically modified - do not change this

PreviousState: Denotes previous connection state


Manual keys 

db ipsec_connections show

db ipsec_connections setprop ConnectionName $key $property

iptype: Default Empty | stattodyn or dyntostat - are we a static host to dynamic client or vice versa ? - Only required for dynamic clients with static hosts
connectiontype: Default tunnel | transport/passthrough/drop/reject
leftrsasig: Default Empty | Your Local rsasignature key
rightrsasig: Default Empty | Your Remote rsasignature key
ipsecversion: Default permit | Whether to allow ikev2 - also : insist/propose/yes/never/no 
ike: Default aes-sha1 | Variable - sample: aes256-sha2;dh14 or aes256-sha2;modp2048
phase2: Default aes-sha1 | Variable - sample: aes256-sha2;dh14 or aes256-sha2;modp2048
mtu: Default Empty | Variable
left: Default Empty | If Empty then %defaultroute is set. Can be local WAN IP
leftid: Default Empty | Variable
leftsourceip:  Default Empty | This server local IP
leftsubnet:  Default Empty | This server local subnet
right: Default Empty | Destination WAN IP
rightid: Default Empty | Variable
rightsubnet: Default Empty | Destination subnet
passwd: Default Empty | Variable
keyingtries: Default Empty | 0 is default - 'forever'
leftcert Default Empty | LeftCertName
rightcert Default Empty | RightCertName

For certificates - do not set or leave the following empty: 

leftrsasig: Default Empty - system generates %cert
rightrsasig: Default Empty - system generates %cert
leftid: Default Empty - system generates %fromcert
rightid: Default Empty - system generates %fromcert

Logs and Debug

Warning.png Warning:
If you are trying to connect Libreswan to other *swan versions using IPsec v2 you may see this in the logs 
"failed to match authenticator"

which may cause link failures. This seems to be an issue with some *swan versions - see this thread for more https://lists.libreswan.org/pipermail/swan/2017/001956.html


The following will give you connection details. 

ipsec whack --status

You should get this if the connection made : 'IPsec SA established'

The following check your configuration (may be some warnings - severity depends on what they are): 

ipsec verify

If you modify a connection use 

signal-event ipsec-update

For a restart of ipsec use 

service ipsec restart

You may find masq needs a restart sometimes 

/etc/init.d/masq restart

Check /var/log/iptables/current to see if packets are getting blocked.

For ipsec itself place to look is /var/log/pluto/pluto.log

If you need more debugging you can set plutodebug = all


Bug report

SME8 OpenSwan IPSEC is listed in the bugtracker contribs section. Please report all bugs, new feature requests and documentation issues there.

"No open bugs found."

SME9 LibreSwan IPSEC is listed in the bugtracker contribs section. Please report all bugs, new feature requests and documentation issues there.

IDProductVersionStatusSummary (4 tasks) ⇒
12109SME Contribs10.0CONFIRMEDNFR reuse existing entries in manager code
11405SME Contribs10betaRESOLVEDInitial Import in SME 10 [smeserver-libreswan]
10661SME Contribs9.2CONFIRMEDNew file to adjust redirects in /etc/sysctl.d
9305SME Contribs9.1CONFIRMEDTrouble configuring kernel settings for ipsec contrib

Other articles in this category

Ipsec, Libreswan, Libreswan-xl2tpd, OpenVPN, OpenVPN Bridge, OpenVPN Bridge/fr, OpenVPN Routed, OpenVPN SiteToSite, SME Server wishlist, SoftEther VPN, Softethervpn-server, VPN, Wireguard

Retrieved from "https://wiki.koozali.org/index.php?title=Libreswan&oldid=42965"