1,574
edits
Changes
From SME Server
Jump to navigationJump to search→MacOS: Add images
[[File:Storage.jpg]]
[[File:Storage.jpg]]
Add an AHCI controller in its place
Add an AHCI controller in its place
[[File:Storage2.jpg]]
Set the port count to 2, then hit the + disk icon on the controller
Set the port count to 2, then hit the + disk icon on the controller
[[File:Storage Ports.jpg]]
Choose the VDI created in the machine setup
Choose the VDI created in the machine setup
[[File:Storage Disk.jpg]]
Do the same with the CD icon. Choose the SME ISO if you've already added it to Virtual Media Manager. If it's not there then hit 'Add' and browse for the ISO
Do the same with the CD icon. Choose the SME ISO if you've already added it to Virtual Media Manager. If it's not there then hit 'Add' and browse for the ISO
[[File:Storage CD.jpg]]
Disable audio. Not mandatory, but you're not going to need it
Disable audio. Not mandatory, but you're not going to need it
[[File:Audio.jpg]]
Choose a 'bridged' network adapter and make sure it's attached to your host's main network connection. This way your VM will becaues like a normal machine on your network and you can SSH to it
Choose a 'bridged' network adapter and make sure it's attached to your host's main network connection. This way your VM will becaues like a normal machine on your network and you can SSH to it
[[File:Networking.jpg]]
You're done - fire up the VM and the installer should start
You're done - fire up the VM and the installer should start
Note - when the machine reboots you may see a 'critical error' (unless it's just my Hackintosh being weird). This is fine - just hit Ok and start it up again
[[File:Error.jpg]]
=== Proxmox ===
=== Proxmox ===
