Build an Official ISO

From SME Server
Jump to navigationJump to search
PythonIcon.png Skill level: Developer
Risk of inconsistencies with Koozali SME Server methodology, upgrades & functionality is high. One must be knowledgeable about how changes impact their Koozali SME Server. Significant risk of irreversible harm.



Warning.png Work in Progress:
unnilennium has marked this page as a Work in Progress. The contents off this page may be in flux, please have a look at this page history the to see list of changes.


Versions

VER=10
VERSION=$VER.1
VERPREV=$VER.0
TESTING=
# where is PREV could be "" "testing or "obsolete"
FROM=
# where we put new one could be "" "testing or "obsolete"
TO=

go back

Introduction

These Notes have been kindly shared by Ian Wells, thanks to him. This howto is there to document the way on the build of an official Iso. For an introduction you must follow first this howto and get a full workable buildserver


bugzilla:7675 build_installer and build_ISO are meant to be run in a mock chroot with the stage tree nfs mounted into it. The build box can be the same, eg COS6 x64 for all ISOs, it is only the mock image that needs to match the ISO, and this is magically handled by the mock configs. You also need to have access to the extras repo as many of the packages needed to build the installer and ISO are contained in there. This repo is to house the needed packages that aren't going to be included in the ISO. For clarification read http://bugs.contribs.org/show_bug.cgi?id=7675#c37

bugzilla:7931 Please read Bug #7931 regarding repodata and symlinks.


Warning.png Warning:
build of iso on cluster should be done on builder7 with releases user


Local Only: Requirements

Local Only: mock requirement

on centos 7 

yum install python-decoratortools
Local Only: mock plugin : iso_prepare

You have to install a new plugin for mock : Iso_prepare

copy the content of https://bugs.contribs.org/attachment.cgi?id=6286 (updated for CentOS 7 and python 3.6) and paste it in 

sudo  wget https://bugs.contribs.org/attachment.cgi?id=6286 -O /usr/lib/python3.6/site-packages/mockbuild/plugins/iso_prepare.py
Local Only: update_repos

The script update_repos relies on RPM2 which can be found as a RPM. 

yum install perl-RPM2 repoview --enablerepo=epel

update_repos (/build/smeserver/stage/bin/update_repos) is used to keep the repos in sync and to create the ‘stage’ from which the ISO is built. On the local build system update_repos can be run manually before building an ISO, whereas it runs every hours on the buildsys.

Important.png Note:
Note that update_repos copies packages from smeupdates-testing to stage but not from smetest, so packages freshly built won't be included into the new ISO until they are manually moved from smetest to smeupdates-testing


The buildsys has two main folders that are relevant for building an ISO. 

repo      => '/build/smeserver/repo/ ', eg '/build/smeserver/repo/testing/10/'
stage     => '/build/smeserver/stage/', eg  '/build/smeserver/stage/10/'
  • repo is the folder that replicates to the mirrors. Be careful of all changes here.
  • stage is the working directory. Note that update_repos expects the folder structure to be in place.

It also needs all GPG keys for every package that it sees, it can take a while to find them all.

Local Only: Create the repo folder and the binary program folder
mkdir -p /build/smeserver/repo
mkdir -p /build/smeserver/stage/bin

The content of builds_bin from CVS needs to be copied to /build/smeserver/stage/bin

Eg 

/bin/cd ~/smeserver/builds_bin
/usr/bin/cvs update -dPA
/bin/cp ~/smeserver/builds_bin/* /build/smeserver/stage/bin
Local Only: Mock Special Settings
  • hard-coded UID of release account

verify that in all /etc/mock/smeserver-10-{i386,x86_64}-iso.cfg you have config_opts['chrootuid'] = os.getuid() 

- config_opts['chrootuid'] = 10020
+ config_opts['chrootuid'] = os.getuid()
Important.png Note:
Due to local settings you have to edit each configuration of mock and edit smeserver-X-{i386,x86_64}-iso.cfg files to include /build in the chroot


These are the changes that you need to made if you do not have the nfs mounts on your local machine
config_opts['plugin_conf']['mount_opts']['dirs'].append(('storage:/export/build', '/build', 'nfs', 'defaults,noatime,nodiratime,nosuid'))
config_opts['plugin_conf']['mount_opts']['dirs'].append(('storage:/mirrors', '/mirrors', 'nfs', 'defaults,noatime,nodiratime,nosuid'))

with 

#config_opts['plugin_conf']['mount_opts']['dirs'].append(('storage:/export/build', '/build', 'nfs', 'defaults,noatime,nodiratime,nosuid'))
#config_opts['plugin_conf']['mount_opts']['dirs'].append(('storage:/mirrors', '/mirrors', 'nfs', 'defaults,noatime,nodiratime,nosuid'))
config_opts['plugin_conf']['bind_mount_opts']['dirs'].append(('/build', '/build' ))

Eg: 

sudo vim /etc/mock/smeserver-10-x86_64-iso.cfg
Local Only: Patch a Mock Plugin
Important.png Note:
this does not seems to be needed anymore on a CentOS 7 builder using python3.6 as per 2020/06/11


There is also an update to /usr/lib/python2.6/site-packages/mockbuild/mounts.py that needs to happen so loop devices get mounted correctly. Check /var/lib/mock/smeserver-VERSION-ARCH/result/root.log after mock -r smeserver-VERSION-ARCH-iso --init (eg mock -r smeserver-8-i386-iso --init). The mounting of the /dev/loopX should pass (return code 0). If it fails (return code 32) then the patch below is needed on your build host. see http://bugs.contribs.org/show_bug.cgi?id=7675#c61

save as mounts.py.20150626.daniel.berteaud.patch see http://bugs.contribs.org/attachment.cgi?id=5146 

--- /usr/lib/python2.6/site-packages/mockbuild/mounts.py	2015-06-04 13:34:04.000000000 +0200
+++ mounts.py	2015-06-26 18:05:53.924416540 +0200
@@ -76,6 +76,9 @@
 
    @traceLog()
    def mount(self):
+        if not os.path.isdir(self.srcpath) and not os.path.isfile(self.srcpath):
+            util.touch(self.bindpath)
+
        if not self.mounted:
            cmd = ['/bin/mount', '-n',
                   '--bind', self.srcpath, self.bindpath ]
@@ -126,5 +129,9 @@
            m.umount()

    @traceLog()
+    def get_mounted(self):
+        return [ m.mountpath for m in self.mounts if m.ismounted() ]
+
+    @traceLog()
    def get_mountpoints(self):
        return [ m.mountpath for m in self.mounts ]

then do 

sudo patch -N  /usr/lib/python2.6/site-packages/mockbuild/mounts.py < mounts.py.20150626.daniel.berteaud.patch

save as mount.py.20150626.daniel.berteaud.patch see http://bugs.contribs.org/attachment.cgi?id=5147 

--- /usr/lib/python2.6/site-packages/mockbuild/plugins/mount.py	2015-06-04 13:34:04.000000000 +0200
+++ mount.py	2015-06-26 18:05:53.921418037 +0200
@@ -41,11 +41,11 @@
        self.opts = conf
        plugins.add_hook("preinit", self._mountPreInitHook)
        for device, dest_dir, vfstype, mount_opts in self.opts['dirs']:
-            builroot.mounts.add(FileSystemMountPoint(buildroot.make_chroot_path(dest_dir),
+            buildroot.mounts.add(FileSystemMountPoint(buildroot.make_chroot_path(dest_dir),
                                                    filetype=vfstype,
                                                    device=device,
                                                    options=mount_opts))
    @traceLog()
    def _mountPreInitHook(self):
        for device, dest_dir, vfstype, mount_opts in self.opts['dirs']:
-            mockbuild.util.mkdirIfAbsent(self.builroot.make_chroot_path(dest_dir))
+            mockbuild.util.mkdirIfAbsent(self.buildroot.make_chroot_path(dest_dir))

then do 

sudo patch -N  /usr/lib/python2.6/site-packages/mockbuild/plugins/mount.py < mount.py.20150626.daniel.berteaud.patch

CVS Folder structure, both local and buildsys

as releases user do

This document presumes that 

~/smeserver/builds_bin is builds_bin from CVS
~/smeserver/cdrom.image is cdrom.image from CVS
~/anaconda-po contains the anaconda translations
~/smeserver/releases contains a local smeserver mirror 
~/smeserver/rpms is rpms folder from CVS

if absent then : 

cd ~ 
mkdir -p smeserver/builds_bin smeserver/cdrom.image smeserver/cdrom.image
ln -s smeserver/builds_bin builds_bin 
ln -s smeserver/cdrom.image cdrom.image
mkdir -p anaconda-po

then update content or populate 

cd smeserver
cvs -z3 -d:pserver:anonymous@shell.koozali.org:/cvs/smeserver co -P builds_bin
cvs -z3 -d:pserver:anonymous@shell.koozali.org:/cvs/smeserver co -P cdrom.image
cvs -z3 -d:pserver:anonymous@shell.koozali.org:/cvs/smeserver co -P rpms
cd ~


Preparation of a new Major Release

this part is a work in progress and might help for SME 11

Check how to tweak Anaconda

download last anaconda package from CentOS and update source in buildsys. Do this on shell VM.

wget https://vault.centos.org/7.9.2009/os/Source/SPackages/anaconda-21.48.22.159-1.el7.centos.src.rpm
~/smeserver/common/cvs-import.sh -b sme10 anaconda-21.48.22.159-1.el7.centos.src.rpm
cd ~/smeserver/rpms/anaconda/sme10
prepa

then you want to harvest the patch we already have. For SME10:

  1. 100-anaconda-koozali-product.patch
  2. 101-anaconda-koozali-add-koozali-install-class.patch
wget https://viewvc.koozali.org/smeserver/rpms/anaconda/sme10/100-anaconda-koozali-product.patch
cvs add 100-anaconda-koozali-product.patch

wget https://viewvc.koozali.org/smeserver/rpms/anaconda/sme10/101-anaconda-koozali-add-koozali-install-class.patch
cvs add 101-anaconda-koozali-add-koozali-install-class.patch


#alternative could to play with
#$ cvs update -p -r rev file.txt > file.txt
#$ cvs add file.txt
#$ cvs commit

then add to the spec file the needed elements to apply the patches, and udpate changelog

## at beginning

#KOOZALI
Patch100: 100-anaconda-koozali-product.patch
Patch101: 101-anaconda-koozali-add-koozali-install-class.patch
#ENDKOOZALI


### in %prep

#KOOZALI
%patch100 -p1
pushd pyanaconda/installclasses/
cp -f centos.py koozali.py
popd
%patch101 -p1
#END KOOZALI



### in changelog
* Tue Feb 16 2021 Jean-Philipe Pialasse <tests@pialasse.com> 21.48.22.159-2.sme
- patch for product.img branding of anaconda

then commit

cvs commit

also prepare for later usage

make clean
make prep

if it fails applying the patches you will need to manually modify the files and ceate new patches...

Update isolinux content

TODO

Update cdrom.image content

Update cdrom.image to the latest in CVS

create a new tree if this is a new SME version 

cd smeserver
cvs -z3 -d:ext:shell.koozali.org:/cvs/smeserver co -P cdrom.image
cd cdrom.image 
cp -r sme9 sme10
rm -rf sme10/CVS
rm -rf sme10/isolinux/CVS
rm -rf sme10/Packages/base/CVS  
rm -rf sme10/Packages/CVS
rm -rf sme10/product/CVS
rm -rf sme10/product/installclasses/CVS
rm -rf sme10/product/pixmaps/CV
rm -rf sme10/updates/CVS
cvs add sme10
cd sme10

add new key 

wget http://mirror.canada.pialasse.com/releases/testing/10/smeos/x86_64/RPM-GPG-KEY-koozali

do a little tidy up, then 

find ./ -name CVS -prune -o -print | xargs cvs add
cvs commit -m 'new cdrom.image version for sme10'

alternatively to only update content 

cd ~/cdrom.image 
cvs update -dPA


Preparation for a new ISO release

Generate a new Changelogs

When generating an ISO the Release Notes for the ISO should contain the full delta from the last ISO. Ian gets a script for doing that

When it is available you need to put it there:

to do this : 

cd ~/smeserver/cdrom.image 
cvs update -dPA
cd  sme10/

then copy the new version, as instance you could do this: 

cp ~/ReleaseNotes.txt README.txt

then commit: 

cvs commit -m "Release 10.1" README.txt

The Smeserver version name

The Version number comes from a rpm, smeserver-release, you need to bump the version in the spec file and build the rpm, think to push it to smeupdates-testing.

RPM dependencies

The smeos, smeupdates, and smeupdates-testing repos are included so we can stage the packages we are going to release without actually having to release them. Normally the smeupdates-testing repo is used for verification (testing is for developer testing). During the ISO release schedule (usually very short) we hold moving packages to updates-testing until the ISO is built.

Examples of dependencies
cp /mirrors/rpmforge/redhat/el6/en/i386/dag/RPMS/perl-Taint-Util-0.08-1.el6.rf.i686.rpm /build/smeserver/repo/testing/9/smetest/i386/RPMS/

cp /mirrors/centos/6/os/i386/Packages/libtevent-0* /build/smeserver/repo/testing/9/smeupdates-testing/i386/RPMS/

This shows that on the buildsys the /mirrors has the main upstream repos and they will normally hold the RPM needed to resolve the dependency. You need to get it into smeupdates-testing, but it is safer to first copy the RPM to smetest and check that all is well.

Rpm update cycle

If an RPM is released during the update cycle:

smetest->smeupdates-testing->smeupdates

If an RPM is only needed for a new ISO and never needed as an update (before the ISO is released) :

/mirrors->smeupdates-testing->smeos

Note that you don't put it into smeos, that is taken care of by the build scripts.

What are smeos/smeextras
  • Every package that needs to be in the ISO will go into smeos, by the buildsys.
  • Packages that are needed for building the ISO, but not actually needed in the ISO, will be in smeextras
How get a Fully updated ISO

If your Iso is not fully updated and a 'yum update' fetch updates after the first boot, in generally centos updates. You will need to push missed updates from smetest to smeupdates-testing.

RPM QA verification

Warning.png Warning:
During the ISO release schedule, ALL RPMS MUST BE VERIFIED IN SMEUPDATES-TESTING.


Server-Manager translations

Check translations from https://translate.koozali.org/patches/ if the filesize is >0 then need to patch smeserver-locale (to sme10) and produce new rpms that will must be pushed to smeupdate-testing

Anaconda translations

Check installer translations from https://translate.koozali.org/anaconda/

get the latest files (-w 1 means wait one second between two requests, to prevent your IP behing blacklisted): 

wget --mirror --no-parent -w 1 -A.mo -P ~/anaconda-po https://translate.koozali.org/anaconda/

you can also fast the operation by doing the following if you only need on sme version: 

mkdir -p ~/anaconda-po/sme10
wget --mirror --no-parent -w 1 -A.mo -P ~/anaconda-po/sme10 https://translate.koozali.org/anaconda/sme10/

Check if installer needs re-building

Warning.png Warning:
If either anaconda has changed OR there is new content in cdrom.image (apart from the release note) then the installer needs to be rebuilt (by the script build_installer). Otherwise just the ISO needs to be built (by the script Build_ISO).



Check Anaconda version

Check which anaconda was used upstream, (eg http://vault.centos.org/5.11/os/SRPMS/ & http://vault.centos.org/6.6/os/Source/SPackages/) and is it newer than the one in CVS. If it is then anaconda needs to be updated and patched. | The latest Anaconda also needs to be in smeextras.

Bump smeserver-release if needed

Most of the time, we'll create a new ISO when we release a new SME Server version. So, we have to bump the version of the smeserver-release RPM.


Important.png Note:
Be careful to bump the version, the release and the displayversion macro, eg 
%define version 10.1
%define release 0.rc2
%define displayversion %{version}rc2

or with final release: 

%define version 10.1
%define release 1
%define displayversion %{version}

Do not forget the changelog !


Bump version in the splash screen

We need to update the title of the splsh screen. For this, we have to update the title line in cdrom.images/sme10/isolinux/isolinux.cfg, eg 

menu title Welcome to SME Server 10.1 RC1


to do this : 

cd ~/smeserver/cdrom.image 
cvs update -dPA
cd  sme10/isolinux/
vim isolinux.cfg

then edit, and finish with: 

cvs commit -m "Release 10.1" isolinux.cfg

Remove the 'Beta warning' in Anaconda

For SME10

edit the file .buildstamp 

cd /build/smeserver/stage/extra/images/10/product
vim .buildstamp

[Main]
Product=Koozali SME Server
Version=10alpha5
BugURL=https://bugs.koozali.org
IsFinal=False
UUID=alpha5.x86_64
[Compose]
Lorax=19.6.66-1


change isFinal to True

Also bump the Version !


Prepare SME Server 10

Local Only: Update local mirror as seen by the chroot

Local Only 

rsync -av --delete --progress ~/smeserver/releases/10/ /build/smeserver/repo/10

Create release specific folder and link (or rename the folder)

The build_installer and build_ISO expect to be run from a directory that points to the head of the stage (ex. /build/stage/8). This is usually a symlink to 8.1 or 8.1beta1. The script fully expands the symlink and pulls off the last element to figure out what version we are going to build.

get the version string Build_an_Official_ISO#Versions


Important.png Note:
Note: images and isolinux do not need to be created as they are removed anyway in build_installer(from SME9, need to check) 


mkdir -p /build/smeserver/stage/$VERSION/{SRPMS,x86_64}
mkdir -p /build/smeserver/stage/$VERSION/x86_64/{Packages,EFI,images,isolinux,LiveOS,repodata,repoview,updates}
mkdir -p /build/smeserver/stage/$VERSION/x86_64/Packages/base
mkdir -p /build/smeserver/stage/$VERSION/x86_64/images/pxeboot
mkdir -p /build/smeserver/stage/$VERSION/x86_64/updates/{po,textw,iw,storage/devicelibs}
cd /build/smeserver/stage/
rm -f $VER
ln -s $VERSION $VER

Get last LiveOS from centos 

cd /build/smeserver/stage/$VERSION/x86_64/LiveOS
wget http://mirror.centos.org/centos/7/os/x86_64/LiveOS/squashfs.img

Get CentOS last images content 

cd /build/smeserver/stage/$VERSION/x86_64/images
wget http://mirror.centos.org/centos/7/os/x86_64/images/boot.iso http://mirror.centos.org/centos/7/os/x86_64/images/efiboot.img
cd /build/smeserver/stage/$VERSION/x86_64/images/pxeboot
wget http://mirror.centos.org/centos/7/os/x86_64/images/pxeboot/initrd.img http://mirror.centos.org/centos/7/os/x86_64/images/pxeboot/vmlinuz

Prepare to build the product.img 

rsync -arv /build/smeserver/repo/$FROM/$VERPREV/smeos/x86_64/product /build/smeserver/stage/$VERSION/x86_64/

Populate isolinux dir: 

rsync -arv /mirrors/centos/7/os/x86_64/isolinux/* /build/smeserver/stage/$VERSION/x86_64/isolinux/

could also be from previous iso 

rsync -arv /build/smeserver/stage/$VERPREV/x86_64/isolinux/* /build/smeserver/stage/$VERSION/x86_64/isolinux/

Populate EFI 

rsync -arv /mirrors/centos/7/os/x86_64/EFI /build/smeserver/stage/$VERSION/x86_64/

could also be from previous iso 

rsync -arv /build/smeserver/stage/$VERPREV/x86_64/EFI /build/smeserver/stage/$VERSION/x86_64/

Create cdrom content

When starting from fresh rsync can copy cdrom.image content, it also generates the folder tree.

Warning.png Warning:
Before doing this, you should use an account with CVS write access to bump the version or alter the following files:
  1. Packages/base/comp.xml
  2. isolinux{boot.msg, help.txt,isolinux.cfg}
  3. netinstall/isolinux/isolinux.cfg
  4. product/.buildstamp
  5. updates/README.txt


Refresh cdrom content

If only refreshing the files, then remove the delete. 

cd ~/smeserver
cvs -z3 -d:pserver:anonymous@shell.koozali.org:/cvs/smeserver co -P cdrom.image

rsync -arv --exclude 'CVS/'  ~/smeserver/cdrom.image/sme$VER/ /build/smeserver/stage/$VER/x86_64/
cd  /build/smeserver/stage/extra/images/$VER/product/

Copy anaconda translations

Anaconda translations need copying to /updates/po from ~/anaconda-po see Build_an_Official_ISO#Anaconda translations to get updated strings 

cp -R ~/anaconda-po/translate.koozali.org/anaconda/sme$VER/* /build/smeserver/stage/$VER/x86_64/updates/po/

Copy anaconda content to create product.img

See ~/smeserver/cdrom.image/sme$VER/updates/README.txt for details of what to copy. The patched anaconda files from ~/smeserver/rpms/anaconda/sme$VER will go to updates directory. The exact directory depends on the anaconda version, eg ~/smeserver/rpms/anaconda/sme$VER/anaconda-21.48.22.56

if first time running cvs (here example as anonymous, but can use your login): 

mkdir -p ~/smeserver
pushd ~/smeserver
cvs -z3 -d:pserver:anonymous@shell.koozali.org:/cvs/smeserver co -P rpms/anaconda
popd

then you can simply 

pushd ~/smeserver/rpms/anaconda/sme10/
cvs update -dPA
make prep
popd
pushd /build/smeserver/stage/$VERSION/x86_64/product/
/bin/cp -f --preserve=timestamps ~/smeserver/rpms/anaconda/sme10/anaconda-21.48.22.159/pyanaconda/installclasses/koozali.py  run/install/product/pyanaconda/installclasses/
/bin/cp -f --preserve=timestamps ~/smeserver/rpms/anaconda/sme10/anaconda-21.48.22.159/pyanaconda/installclasses/koozali.py usr/lib64/python2.7/site-packages/pyanaconda/installclasses/
/bin/cp -f --preserve=timestamps ~/smeserver/rpms/anaconda/sme10/anaconda-21.48.22.159/pyanaconda/installclasses/centos.py usr/lib64/python2.7/site-packages/pyanaconda/installclasses/
/bin/cp -f --preserve=timestamps ~/smeserver/rpms/anaconda/sme10/anaconda-21.48.22.159/pyanaconda/installclasses/fedora.py usr/lib64/python2.7/site-packages/pyanaconda/installclasses/
popd

For testing purpose you can do this, but BUILD SCRIPT DOES IT ! build new product.img and copy it to stage, if you want but it should be done by the build.ISO script 

#find . | cpio -c -o | gzip -9cv > ../product.img; cd ..
#mkdir -p /build/smeserver/stage/$VER/x86_64/images/
#cp product.img /build/smeserver/stage/$VER/x86_64/images/

Local Only: Hack: Permission Fixup

This is only needed on local server if permissions are incorrect. It should not be needed.

sudo chmod -R a+w /build/smeserver/stage

Local Only: Create stage content

Important.png Note:
Note: This step occurs every hours on the buildsys as cron task. 


/build/smeserver/stage/bin/update_repos



Build & Release SME Server 10

get the version string Build_an_Official_ISO#Versions

You can find logs of the related scripts build_ISO and build_installer

If something goes wrong, please verify first 

/build/smeserver/stage/$VER/build_installer.x86_64

and after if you have no errors 

/build/smeserver/stage/$VER/build_ISO.x86_64

Build SME Server 10 64 bit ISO

as releases on builder7 

mock -r smeserver-$VER-x86_64-iso --init
# not to do #mock -r smeserver-$VER-x86_64-iso --mount --cwd /build/smeserver/stage/$VER --unpriv --chroot /build/smeserver/stage/bin/build_installer
mock -r smeserver-$VER-x86_64-iso --mount --cwd /build/smeserver/stage/$VER --unpriv --chroot /build/smeserver/stage/bin/build_ISO
local only
mock -r smeserver-$VER-x86_64-iso --init
#not to do #mock -r smeserver-$VER-x86_64-iso --mount --cwd /build/smeserver/stage/$VER --unpriv --chroot /build/smeserver/stage/bin/build_installer
sudo chmod -R a+w /build/smeserver/stage
mock -r smeserver-$VER-x86_64-iso --mount --cwd /build/smeserver/stage/$VER --unpriv --chroot /build/smeserver/stage/bin/build_ISO


Where are My F... ISO

ls /build/smeserver/stage/iso/10/
source  x86_64

Developer Access Needed to release ISO

From this point a developer access to the buildsys and the main repo is Needed, sorry guys. Has to be done from buildsrv

get the version string Build_an_Official_ISO#Versions

Prepare directory structure for SME10 release

SME 10.x test releases will go to /build/smeserver/repo/testing/10. Check that the link points to the correct testing release. Note when uploading Jigdos the ‘10’ link will not be pointing to the new directory. 

mkdir -p /build/smeserver/repo/$TO/$VERSION/iso/source/
mkdir -p /build/smeserver/repo/$TO/$VERSION/iso/x86_64/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smeos/x86_64/
Copy SME Server 10 64 bit Jigdo to mirror
/bin/cp -a /build/smeserver/stage/iso/$VER/x86_64/smeserver-$VERSION-x86_64.jigdo /build/smeserver/repo/$TO/$VERSION/iso/x86_64/
/bin/cp -a /build/smeserver/stage/iso/$VER/x86_64/smeserver-$VERSION-x86_64.template /build/smeserver/repo/$TO/$VERSION/iso/x86_64/
rsync -a --delete /build/smeserver/stage/$VER/x86_64/ /build/smeserver/repo/$TO/$VERSION/smeos/x86_64/
Copy SME Server 10 SRPMS Jigdo to mirror
/bin/cp -a /build/smeserver/stage/iso/$VER/source/smeserver-$VERSION-SRPMS.jigdo /build/smeserver/repo/$TO/$VERSION/iso/source/
/bin/cp -a /build/smeserver/stage/iso/$VER/source/smeserver-$VERSION-SRPMS.template /build/smeserver/repo/$TO/$VERSION/iso/source/
rsync -a --delete /build/smeserver/stage/$VER/SRPMS/ /build/smeserver/repo/$TO/$VERSION/smeos/SRPMS
Copy SME Server 10 ISOs to mirror
rsync -a --delete /build/smeserver/stage/iso/$VER/ /build/smeserver/repo/$TO/$VERSION/iso


Hard links

As an example how to create the hard links: 

cp -lr /build/smeserver/repo/testing/$VERPREV/smeos/* /build/smeserver/repo/$TO/$VERSION/smeos/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smeaddons/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smecontribs/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smedev/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smeextras/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smetest/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smeupdates/
mkdir -p /build/smeserver/repo/$TO/$VERSION/smeupdates-testing/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smecontribs/* /build/smeserver/repo/$TO/$VERSION/smecontribs/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smedev/* /build/smeserver/repo/$TO/$VERSION/smedev/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smeextras/* /build/smeserver/repo/$TO/$VERSION/smeextras/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smetest/* /build/smeserver/repo/$TO/$VERSION/smetest/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smeupdates/* /build/smeserver/repo/$TO/$VERSION/smeupdates/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smeupdates-testing/* /build/smeserver/repo/$TO/$VERSION/smeupdates-testing/
cp -lr /build/smeserver/repo/$FROM/$VERPREV/smeaddons/* /build/smeserver/repo/$TO/$VERSION/smeaddons/
Switch main version link

and finally 

rm -f  /build/smeserver/$TO/testing/$VER
pushd /build/smeserver/$TO/testing/
ln -s $VERSION $VER
popd

then you can mv from testing to main folder

Retrieved from "https://wiki.koozali.org/index.php?title=Build_an_Official_ISO&oldid=41652"