SME Server on Scientific Linux
The SME Server distribution is based on CentOS. Since CentOS is a derivative of RHEL, it is possible to install the SME Server functionalities on top of other (virtually 100% binary compatible) RHEL derivatives, including CentOS itself.
This possibility may be interesting for organisations that have a software policy in place that prevents the deployment of a server OS not listed as an allowed OS within such a policy. Typically large enterprises, governmental and university related organisations have and enforce such a policy.
Scientific Linux has the following introduction:
SL is a Linux release put together by Fermilab, CERN, and various other labs and universities around the world. Its primary purpose is to reduce duplicated effort of the labs, and to have a common install base for the various experimenters. The base SL distribution is basically Enterprise Linux, recompiled from source. Our main goal for the base distribution is to have everything compatible with Enterprise, with only a few minor additions or changes. Examples of items that were added are Alpine, and OpenAFS. Our secondary goal is to allow easy customization for a site, without disturbing the Scientific Linux base. The various labs are able to add their own modifications to their own site areas. By the magic of scripts, and the anaconda installer, each site is to be able to create their own distributions with minimal effort. Or, if a user wishes, they can simply install the base SL release.
SME Server 9.0 on top of Scientific Linux
The installation instructions of SME Server functionality are based on minimal installation of Scientific Linux 6.5 64-bit and SME Server 9.0 repository. Please use a virtual environment to test your results. Virtual environments may include e.g. VirtualBox (free), VMWare, KVM or Xen.
Install SL minimal
SME Server functionality is only tested with a minimal install of Scientific Linux. To install 'SL minimal' one can use the boot.iso. A internet connection is required. The URL required for performing a net install must point to the /pub/scientific-linux/6.5/x86_64/os/ diretory of the mirror you use.
You can download the SL boot.iso from one of the many scientific mirrors. Install SL minimal in your virtual environment which should have at least:
- 1Gb RAM memory
- 20Gb harddisk
- 1 Network interface bridged to your host network interface
- Internet access
Please select 'minimal' and leave all other options as per their defaults.
Once the installation has finished, please reboot and continue with enabling networking and SSH.
Enable networking and SSH
Login as root with the password what was provided at installation time. To enable networking please issue:
ifup eth0
This will bring up eth0 based on your local available DHCP server. Please check you IP with 'ipconfig' and 'ip link show'. During the configuration of SME Server functionality, final and fixed IP addresses will be configured. To enable SSH please issue:
service sshd start
SSH will now be enabled. Please log in remotely via SSH and further instructions are based on the fact that you are remotely logged in via ssh. Specifically for Cut and Paste operations.
Install nano and wget
If you are not familiar with vi or vim, you can install the nano editor. This page assumes that you have installed nano. Please install nano and wget as follows by issuing as root on the console:
yum install nano wget
Disable SELinux
SELinux is enabled by default. We want to disable it for there are a few services (e.g. httpd) that get blocked by SELinux. To check the status of SELinux you can enter the command:
getenforce
SELinux uses policies that conflict with some of the SME Server services ports like https. One can adjust the allowed ports, or remove the SELinux policies and disable SELinux by the following commands:
setenforce 0 sed -i -e 's/SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config yum remove selinux-policy-targeted
Update SL
Now is a good time to update your SL installation with the latest (security) updates:
yum update
Add SME Server repo's
To be able to download the required packages we need to add the SME Server repo's. The auto-selected (closest) mirror may not be the fastest, and you may want to hash out the 'mirrorlist=' line entries and replace them with 'baseURL=' with a repo location of your choice. Please see this the download locations overview.
The below example uses a fixed URl to download the RPM's. In general this URL is fast and reliable so there is no immediate need to change these URL's.
To add the smeos9 repo's please copy the below text in the block and and issue the following commands:
nano -w /etc/yum.repos.d/smeos9.repo
and paste the following into the new '/etc/yum.repos.d/smeos9.repo' file
[smeos9] enabled=1 MirrorList=http://mirrorlist.contribs.org/mirrorlist/smeos-9 name=SME Server9 - os enablegroups=1 gpgcheck=1 includepkgs = e-smith\* smeserver\* *.sme.* clamav* clamd* mhash tbb perl-* htop proftpd php-pear-* GeoIP mod_auth_tkt radiusclient-ng nut-client nut pyzor oidentd rssh pam_abl clamav par2cmdline DCC wv checkpassword pam pv razor-agents clam-db initscripts checkpassword-pam [smeupdates9] enabled=1 MirrorList=http://mirrorlist.contribs.org/mirrorlist/smeupdates-9 name=SME Server9 - updates gpgcheck=1 enablegroups=1 gpgkey = http://mirror.contribs.org/releases/testing/9/smeos/$basearch/RPM-GPG-KEY-SMEServer includepkgs = e-smith\* smeserver\* *.sme.* clamav* clamd* mhash tbb perl-* htop proftpd php-pear-* GeoIP mod_auth_tkt radiusclient-ng nut-client nut pyzor oidentd rssh pam_abl clamav par2cmdline DCC wv checkpassword-pam pv razor-agents clam-db initscripts checkpassword-pam [smeupdates-testing9] enabled=1 MirrorList=http://mirrorlist.contribs.org/mirrorlist/smeupdates-testing-9 name=SME Server9 - updates testing gpgcheck=1 enablegroups=1 gpgkey = http://mirror.contribs.org/releases/testing/9/smeos/$basearch/RPM-GPG-KEY-SMEServer includepkgs = e-smith\* smeserver\* *.sme.* clamav* clamd* mhash tbb perl-* htop proftpd php-pear-* GeoIP mod_auth_tkt radiusclient-ng nut-client nut pyzor oidentd rssh pam_abl clamav par2cmdline DCC wv checkpassword-pam pv razor-agents clam-db initscripts checkpassword-pam
Now we can install the required packages from the repo's. The includepkgs line in the SME Server repo file ensure that only the required packages for SME Server will come from the SME repo's, and all others from the sl repo's.
yum install e-smith\* smeserver\* *.sme.* initscripts --exclude=smeserver-release*,*86 --nogpg
This will result in the following summary. The numbers may vary depending on the changes in the repositories. Transaction Summary
Install 391 Package(s) Upgrade 1 Package(s) Total size: 170 M
Post-upgrade/reboot
The installation of SME Server functionality is finished. For the initial configuration the following commands are mandatory:
/sbin/e-smith/signal-event post-upgrade /sbin/e-smith/signal-event reboot
First use
Set root password
After the first boot, there is the opportunity to restore from a backup and a new root (admin) password will be asked. This may be the same as you used for the initial installation of SL or you can set a new one. After setting the root password, SME Server will configure additional settings and automatically reboot.
Configuration
When the system has rebooted, it is ready for SME Server configuration of network and services settings. To start this process, please login as root and type:
console
and select 'configure this server'. After configuration, the server will reboot itself, re-configure itself based on the user choices and is in full operational mode ready for full use.
After the reboot, you can access the server-manager (https://your_ip/server-manager) and login as admin and the root password. In server-manager one can enable ssh and set various ssh options.
Adjust yum repositories
This whole yum section needs rework.
By default SME Server assumes it has CentOS as base linux system, In this case we use Scientific Linux, so we have to remove the CentOS specific repo's and add the SL repo's.
To remove the CentOS specific repo's issue the following commands as root:
db yum_repositories delete base db yum_repositories delete addons db yum_repositories delete centosplus db yum_repositories delete contrib db yum_repositories delete extras
Add the below line to the existing SME repo's: TBA
includepkgs = e-smith\* smeserver\* *.sme.* clamav* clamd* mhash tbb perl-* htop proftpd php-pear-* GeoIP mod_auth_tkt radiusclient-ng nut-client nut pyzor oidentd rssh pam_abl clamav par2cmdline DCC wv checkpassword-pam pv razor-agents clam-db initscripts checkpassword-pam
Add SL repo's the 'SME Server way'
TBA
and update and activate the revised yum repo's configuration with the following command:
signal-event yum-modify
Current status
The above instructions should have brought you 'on par' with the current developments of SME Server 9.0 alpha 2.
- Currently there is a bug in alpha 2 that prevents proper booting after installing SME Server. Please add 'selinux=0 noipv6' to the boot options.
