Line 4: |
Line 4: |
| To enable | | To enable |
| config setprop smartd status enabled | | config setprop smartd status enabled |
| + | |
| + | And start, (smartd will start automatically on a reboot if enabled) |
| + | /etc/rc.d/init.d/smartd start |
| | | |
| Errors are emailed admin if and when they are found. | | Errors are emailed admin if and when they are found. |
| + | |
| + | If you receive an email indicating problems, then you should manually run tests & view the report & take appropriate action (eg replace drive if necessary). |
| + | |
| | | |
| To manually check disks | | To manually check disks |
| | | |
| Generate report | | Generate report |
− | smartctl -t short /dev/hdc (1 minute) | + | smartctl -t short /dev/sda (1 minute) |
− | smartctl -t long /dev/hdc (1 hour) | + | smartctl -t long /dev/sda (1 hour) |
| + | smartctl -t conveyance /dev/sda (5 minutes) |
| | | |
| View report | | View report |
− | smartctl -a /dev/hdc | + | smartctl -a /dev/sda |
| + | |
| + | |
| + | For additional information see: |
| + | |
| + | http://linuxcommand.org/man_pages/smartd8.html |
| + | |
| + | http://linux.die.net/man/8/smartctl |
| | | |
− | http://www.linuxmanpages.com/man8/smartd.8.php <br> | + | Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T. |
− | http://www.captain.at/howto-linux-smartmontools-smartctl.php
| |
| | | |
− | <noinclude>[[Category:Howto]]</noinclude> | + | <noinclude>[[Category:Howto]][[Category:Administration:Monitoring]]</noinclude> |