Changes

Problem reports have been submitted with the following NIC's:

Problem reports have been submitted with the following NIC's:

Realtek 8169 Ethernet is not recommended, The driver included in CentOS 4.1 is out of date and has problems.

*Realtek 8169 Ethernet is not recommended, The driver included in CentOS 4.1 is out of date and has problems.

Two identical Realtec nic's caused a kernal panic, Model unknown

*Two identical Realtec nic's caused a kernal panic, Model unknown

Intel 82573L Gigabit Ethernet says the e1000 driver should work but doesn't  

*Intel 82573L Gigabit Ethernet says the e1000 driver should work but doesn't  

3com 905 (Cyclone) Ethernet is not recommended, This card is not detected

*3com 905 (Cyclone) Ethernet is not recommended, This card is not detected

D-Link DGE530T Rev-B1 on SME 7.1 does not work.

*D-Link DGE530T Rev-B1 on SME 7.1 does not work.

D-Link DFE 530TXS rev. A1 Ethernet adaptor not recognized (a.k.a. DL10050, Sundance)

*D-Link DFE 530TXS rev. A1 Ethernet adaptor not recognized (a.k.a. DL10050, Sundance)

[[http://sourceforge.net/tracker/index.php?func=detail&aid=1359597&group_id=96750&atid=615772 sourceforge]]

[[http://sourceforge.net/tracker/index.php?func=detail&aid=1359597&group_id=96750&atid=615772 sourceforge]]

[[https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=154349 redhat]]

[[https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=154349 redhat]]

====Systems or motherboards may need a bios update or are unsupported====

====Systems or motherboards may need a bios update or are unsupported====

2001 CUSI-M motherboard - bios

*2001 CUSI-M motherboard - bios

Tyan S2850G2N with AMD Opteron 160, BIOS update >= 112  

*Tyan S2850G2N with AMD Opteron 160, BIOS update >= 112  

Compaq ProLiant 6400R's see [[bugzilla:2175]]

*Compaq ProLiant 6400R's see [[bugzilla:2175]]

Asus TUSL2-C intel 815ep atx motherboard - [[bugzilla:3033]]

*Asus TUSL2-C intel 815ep atx motherboard - [[bugzilla:3033]]

Intel board D946GZIS - unsupported

*Intel board D946GZIS - unsupported

Boards using a Dual Pentium Pro are unlikely to work

*Boards using a Dual Pentium Pro are unlikely to work

ASUS P5VD2-VM Motherboard - unsupported [[bugzilla:3086]]

*ASUS P5VD2-VM Motherboard - unsupported [[bugzilla:3086]]

*Legacy ~MegaRAID driver is no longer included

*Legacy ~MegaRAID driver is no longer included

Certain raid cards that worked under SME Server 6, do not work under SME Server 7. Adapters with the following PCI vendor ID and device ID pairs are not supported by the megaraid_mbox driver: vendor, device = 0x101E, 0x9010; 0x101E, 0x9060; 0x8086, 0x1960. The lspci -n command can be used to display the IDs for adapters installed in a particular machine. Products with these IDs are known by (but not limited to) the following model names:  Broadcom 5820, Dell PERC (dual-channel fast/wide SCSI) RAID controller, Dell PERC2/SC (single-channel Ultra SCSI) RAID controller, Dell PERC2/DC (dual-channel Ultra SCSI) RAID controller, Dell CERC (four-channel ATA/100) RAID controller, DRAC 1, ~MegaRAID 428, ~MegaRAID 466, ~MegaRAID Express 500, HP NetRAID 3Si and 1M.  Both Dell and LSI Logic have indicated that they no longer support these models in the 2.6 kernel. As a result, these adapters are no longer supported in Red Hat Enterprise Linux 4 Update 1, upon which SME Server 7 is based. See this bug listing for details, there is an unsupported workaround if needed:  

Certain raid cards that worked under SME Server 6, do not work under SME Server 7.  

 

Adapters with the following PCI vendor ID and device ID pairs are not supported by the megaraid_mbox driver: vendor, device = 0x101E, 0x9010; 0x101E, 0x9060; 0x8086, 0x1960. The lspci -n command can be used to display the IDs for adapters installed in a particular machine. Products with these IDs are known by (but not limited to) the following model names:  Broadcom 5820, Dell PERC (dual-channel fast/wide SCSI) RAID controller, Dell PERC2/SC (single-channel Ultra SCSI) RAID controller, Dell PERC2/DC (dual-channel Ultra SCSI) RAID controller, Dell CERC (four-channel ATA/100) RAID controller, DRAC 1, MegaRAID 428, MegaRAID 466, MegaRAID Express 500, HP NetRAID 3Si and 1M.   

 

Both Dell and LSI Logic have indicated that they no longer support these models in the 2.6 kernel. As a result, these adapters are no longer supported in Red Hat Enterprise Linux 4 Update 1, upon which SME Server 7 is based.  

 

See this bug listing for details, there is an unsupported workaround if needed:  

[[https://sourceforge.net/tracker/?func=detail&atid=615772&aid=1274199&group_id=96750]]

[[https://sourceforge.net/tracker/?func=detail&atid=615772&aid=1274199&group_id=96750]]

*aic7xxx driver hangs on installation boot

*aic7xxx driver hangs on installation boot