3,254
edits
Changes
From SME Server
Jump to navigationJump to search→Connecting multiple UPS's
====Connecting multiple UPS's====
====Connecting multiple UPS's====
To be added http://bugs.contribs.org/show_bug.cgi?id=629
To be added http://bugs.contribs.org/show_bug.cgi?id=629
===UPS Variables and Commands===
===UPS Variables and Commands===
====UPS Administrative Privileges====
====UPS Administrative Privileges====
<tabs container>
<tab name="SME 10">
You should check your new password ( AdminPass ) to run '''upsrw''' & '''upscmd'''. Of course, you could change your password for a easier one to use.
You should check your new password ( AdminPass ) to run '''upsrw''' & '''upscmd'''. Of course, you could change your password for a easier one to use.
}}
}}
==== UPS access ====
</tab>
<tab name="SME 9">
{{Warning box|Be sure to have e-smith-nutUPS-2.4.0-9.el6.sme.noarch or higher to carry on with these instructions. If you get a lower version, just follow SME8 instruction.}}
rpm -qa e-smith-nutUPS
If you get NUT running with administrative privileges modification from sme8 instruction, you need to remove the custom template created for this. These variables are taken in charge by the new package.
First you need to delete the custom template file.( This command delete the directory, be sure you don't have personal file present. If the case, delete manualy the file created for administrative privileges )
rm -rf /etc/e-smith/templates-custom/etc/ups/upsd.users
Now, to get '''upsd''' to recognise the modification of user, we need to expand the template and reload the '''upsd''' configuration
/sbin/e-smith/expand-template /etc/ups/upsd.users
/usr/sbin/upsd -c reload
You should check your new password ( AdminPass ) to run '''upsrw''' & '''upscmd'''. Of course, you could change your password for a easier one to use.
config show nut
To set new admin password in database. The new password would be admin ( change it to suit your need )
config setprop nut AdminPass admin
To view a complete list of the UPS variables, both informational and modifiable
To enabled administrative privileges and run command to ups.
config setprop nut AdminUser enabled
Now, to get '''upsd''' to recognise admin modification for administrative privileges we expand the template and reload the '''upsd''' configuration
/sbin/e-smith/expand-template /etc/ups/upsd.users
/usr/sbin/upsd -c reload
{{Note box|To disabled the administrative privileges once you have changed the UPS parameters or issued commands as required, issue the commands
config setprop nut AdminUser disabled
/sbin/e-smith/expand-template /etc/ups/upsd.users
/usr/sbin/upsd -c reload
}}
{{Warning box|Make sure you understand the meaning or the UPS variables and their available setting options. Verify that your changes meet your intended behaviour!}}
</tab>
</tab>
<tab name="SME 8">
<tab name="SME 8">
In order to be able to use '''upsrw''' and '''upscmd''' it is necessary to have a suitable additional user defined in the '''upsd.users''' configuration file.
In order to be able to use '''upsrw''' and '''upscmd''' it is necessary to have a suitable additional user defined in the '''upsd.users''' configuration file.
/usr/sbin/upsd -c reload
/usr/sbin/upsd -c reload
}}
}}
</tab>
</tabs>
==== UPS access ====
The access of the ups is controled by database properties. The default propertie is set to localhost and give permission to run '''upsrw''' & '''upscmd''' from localhost only if administrative privileges is set to enabled as above. No slave ups could be connected in this mode. Three choices is available to set access.
* localhost: the ups access is only from the local machine ( UPS master ).
* private: the ups access is from your local machine and local network as per define in server-manager panel.
* public: the ups access is similar to localhost.
To set access properties in the database ( example: localhost )
config setprop nut access localhost
/sbin/e-smith/expand-template /etc/ups/upsd.conf
/usr/sbin/upsd -c reload
In localhost or public mode ( no remote access ), access to your ups is ( UPS name is '''UPS''' )
UPS@localhost
==Setting UPS Variables==
In private mode, access to your ups is ( UPS name is '''UPS''' )
In order to set UPS variables it is necessary to have enabled a user with administrative privileges as above first.
UPS@localhost or UPS@192.168.1.1 ( ups master IP )
slave ups get access with UPS@192.168.1.1 ( ups master IP )
====Setting UPS Variables====
In order to set UPS variables it is necessary to have enabled the administrative privileges as above first and you get the possibility to run command from slave ups if access is set to private as above.
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
You can now modify the variables you wish using a command similar to the following (Note the order of the arguments is important, and you may need quotes around the value being set, "20"):
You can now modify the variables you wish using a command similar to the following (Note the order of the arguments is important, and you may need quotes around the value being set, "20"):
upsrw -s battery.charge.low=20 -u admin -p admin UPS
upsrw -s battery.charge.low=20 -u admin -p admin UPS
For remote host (slave UPS ), we need to add the IP from master UPS to run command.
upsrw -s battery.charge.low=20 -u admin -p admin UPS@192.168.2.1
Where the value after '''-s''' should be one of the parameters identified by the '''upsrw ups''' command. You can of course verify your changes using
Where the value after '''-s''' should be one of the parameters identified by the '''upsrw ups''' command. You can of course verify your changes using
upsc UPS
upsc UPS
After you are done, clean up by disabling the '''upsd''' administrative user '''admin''':
After you are done, clean up by disabling the '''upsc''' administrative privileges:
{{Warning box|Make sure you understand the meaning or the UPS variables and their available setting options. Verify that your changes meet your intended behaviour!}}
{{Warning box|Make sure you understand the meaning or the UPS variables and their available setting options. Verify that your changes meet your intended behaviour!}}
- Manual page: man upsrw
- Manual page: man upsrw
=====Changing battery date=====
an example to update you battery date upon changing it. (use your own password)<syntaxhighlight lang="bash">
upsrw -s battery.mfr.date=2020/08/31 -u admin -p admin UPS
</syntaxhighlight>
====Issuing UPS Commands====
====Issuing UPS Commands====
In order to issue UPS commands it is necessary to have enabled a user with administrative privileges as above first.
In order to issue UPS commands it is necessary to have enabled the administrative privileges as above first and you get the possibility to run command from slave ups if access is set to private as above.
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
upscmd -l UPS
upscmd -l UPS
You can now issue a command to the UPS with similar to the following:
You can now issue a command to the localhost UPS with similar to the following:
upscmd -u admin -p admin UPS test.battery.start
upscmd -u admin -p admin UPS test.battery.start
For remote host (slave UPS ), we need to add the IP from master UPS to run command.
upscmd -u admin -p admin UPS@192.168.2.1 test.battery.start
Where the command '''test.battery.start''' is a valid command for your UPS as previously determined by '''upscmd -l UPS'''. Depending upon the command issued you may get broadcast messages and emails relating to and confirming what the UPS is doing.
Where the command '''test.battery.start''' is a valid command for your UPS as previously determined by '''upscmd -l UPS'''. Depending upon the command issued you may get broadcast messages and emails relating to and confirming what the UPS is doing.
After you are done, clean up by disabling the '''upsd''' administrative user '''admin''':
After you are done, clean up by disabling the '''upsc''' administrative privileges:
{{Warning box|Before issuing any commands verify what they do for your particular UPS via the relevant documentation and ensure that the command meets your intended behavioural requirement!
{{Warning box|Before issuing any commands verify what they do for your particular UPS via the relevant documentation and ensure that the command meets your intended behavioural requirement!
Issuing commands could shutdown your server unexpectedly!}}
Issuing commands could shutdown your server unexpectedly!}}
=Scheduling Events=
=Scheduling Events=
