Changes

Before rebooting, you should tell SME what driver you want to use for the on-board ethernet controllers.

Before rebooting, you should tell SME what driver you want to use for the on-board ethernet controllers.

If your board has RealTek RTL8169 or RTL8110 gigabit ethernet controllers (e.g. the Jetway J7F4 or the [http://www.mini-itx.com/store/?c=34#modules 3x Gigabit LAN extension module] for the [http://www.mini-itx.com/store/?c=34#j7f2 Jetway J7F2]), you'll want to use the r8169 driver:

If your board has RealTek RTL8169 or RTL8110 gigabit ethernet controllers (e.g. the Jetway J7F4 or the [http://linitx.com/viewcategory.php?catid=140 3x Gigabit LAN extension module] for the [http://linitx.com/viewcategory.php?catid=141 Jetway J7F2]), you'll want to use the r8169 driver:

  /sbin/e-smith/config set EthernetDriver1 r8169

  /sbin/e-smith/config set EthernetDriver1 r8169

  /sbin/e-smith/config set EthernetDriver2 r8169

  /sbin/e-smith/config set EthernetDriver2 r8169

If your board has dual VIA 10/100 Mbit ethernet controllers (e.g. the [http://www.mini-itx.com/store/?c=2#epiavt VIA Epia VT] or [http://www.mini-itx.com/store/?c=2#epiaek Epia EK] series), you'll want to use the via-rhine driver:

If your board has dual VIA 10/100 Mbit ethernet controllers (e.g. the [http://www.mini-itx.com/store/?c=2#epiavt VIA Epia VT] or [http://linitx.com/viewproduct.php?prodid=11134 Epia EK] series), you'll want to use the via-rhine driver:

  /sbin/e-smith/config set EthernetDriver1 via-rhine

  /sbin/e-smith/config set EthernetDriver1 via-rhine