653
edits
Changes
Jump to navigation
Jump to search
Line 266:
Line 266: + +
SME Server:Documentation:Administration Manual:Chapter5 (view source)
Revision as of 22:42, 13 April 2021
, 22:42, 13 April 2021→Configuring Local Network Parameters
If, however, you are operating your server in "server-only" mode and there are already servers on your network, you will need to obtain an unused IP address for your local network.
If, however, you are operating your server in "server-only" mode and there are already servers on your network, you will need to obtain an unused IP address for your local network.
{{Tip box|The careful admin will "ping" the intended address from any available workstation on the network to be certain it is not in use.}}
Next, you will be prompted to enter the subnet mask for your local network. If you are adding your server to an existing network, you will need to use the subnet mask used by the local network. Otherwise, unless you have a specific need for some other setting, you can accept the default setting.
Next, you will be prompted to enter the subnet mask for your local network. If you are adding your server to an existing network, you will need to use the subnet mask used by the local network. Otherwise, unless you have a specific need for some other setting, you can accept the default setting.