Changes

===Step 6: Final configuration===

===Step 6: Final configuration===

If all has gone well, you should now be up and running on your brand new kernel. All that remains is to make sure that any remaining 'extra features' are loaded into the kernel. If you are running on a VIA C7 based board such as the Jetway J7F4, try the following to enable hardware crypting support:

If all has gone well, you should now be up and running on your brand new kernel. All that remains is to make sure that any remaining 'extra features' are loaded into the kernel. If you are running on a VIA CN700 based board such as the Jetway J7F4 / J7F2 or the VIA Epia VT / EK series, try the following to enable hardware crypting support:

  /sbin/modprobe via-rng

  /sbin/modprobe via-rng

  /sbin/modprobe via

  /sbin/modprobe via

You should also enable on-demand frequency scaling, so the processor will switch from 400 Mhz to 1200 Mhz when needed:

If your board has a C7 processor, you should also enable on-demand frequency scaling, so the processor will switch from 400 Mhz to e.g. 1200 Mhz when needed:

  echo ondemand >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

  echo ondemand >/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

  /sbin/e-smith/signal-event local

  /sbin/e-smith/signal-event local

===Step 7: Cleaning up===

===Step 7: Cleaning up===