Changes

=Aditional Information=

=Aditional Information=

There are template fragments in /etc/e-smith/templates/etc/ups that control the config files located in /etc/ups. The default settings should be OK for most situations. The <tt>/etc/nut.conf</tt> file must be manually edited like <tt>mode=standalone</tt> as the templates do not touch this file.

There are template fragments in /etc/e-smith/templates/etc/ups that control the config files located in /etc/ups. The default settings should be OK for most situations. The <tt>/etc/nut.conf</tt> file must be manually edited like <tt>mode=standalone</tt> as the templates do not touch this file. In this case it would be:

By default, NUT is configured for a USB connected UPS in Master mode, but is disabled. When enabled, NUT will monitor the UPS and take various actions when certain notifications are received. This is controlled by the '''/etc/ups/upsmon.conf''' file which among other things lists the notifications and the actions to be taken for each. For example an ''On Battery'' event is captured by the '''NOTIFYFLAG ONBATT''' entry and the following '''SYSLOG+WALL+EXEC''' command string. This string tells '''upsmon''' to write the event to the System Log, broadcast a message to all users via Wall, and execute the command denoted by the '''NOTIFYCMD''' entry.

By default, NUT is configured for a USB connected UPS in Master mode, but is disabled. When enabled, NUT will monitor the UPS and take various actions when certain notifications are received. This is controlled by the '''/etc/ups/upsmon.conf''' file which among other things lists the notifications and the actions to be taken for each. For example an ''On Battery'' event is captured by the '''NOTIFYFLAG ONBATT''' entry and the following '''SYSLOG+WALL+EXEC''' command string. This string tells '''upsmon''' to write the event to the System Log, broadcast a message to all users via Wall, and execute the command denoted by the '''NOTIFYCMD''' entry.