66
edits
Changes
From SME Server
Jump to navigationJump to searchno edit summary
/sbin/e-smith/expand-template /etc/ups/upsd.users
/sbin/e-smith/expand-template /etc/ups/upsd.users
service nut restart
===UPS Variables and Commands===
===UPS Variables and Commands===
/sbin/e-smith/expand-template /etc/ups/upsd.users
/sbin/e-smith/expand-template /etc/ups/upsd.users
service nut restart
{{Note box|To disabled the admin user once you have changed the UPS parameters or issued commands as required, issue the commands
{{Note box|To disabled the admin user once you have changed the UPS parameters or issued commands as required, issue the commands
config setprop nut AdminUser disabled
config setprop nut AdminUser disabled
/sbin/e-smith/expand-template /etc/ups/upsd.users
/sbin/e-smith/expand-template /etc/ups/upsd.users
service nut restart
}}
}}
config setprop nut access localhost
config setprop nut access localhost
/sbin/e-smith/expand-template /etc/ups/upsd.conf
/sbin/e-smith/expand-template /etc/ups/upsd.conf
service nut restart
In localhost or public mode ( no remote access ), access to your ups is ( UPS name is '''UPS''' )
In localhost or public mode ( no remote access ), access to your ups is ( UPS name is '''UPS''' )
slave ups get access with UPS@192.168.1.1 ( ups master IP )
slave ups get access with UPS@192.168.1.1 ( ups master IP )
==Setting UPS Variables==
==Setting UPS Variables==
In order to set UPS variables it is necessary to have enabled a user with administrative privileges as above first and you get the possibility to run command from slave ups if access is set to private as above.
In order to set UPS variables it is necessary to have enabled the administrative privileges as above first and you get the possibility to run command from slave ups if access is set to private as above.
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
====Issuing UPS Commands====
====Issuing UPS Commands====
In order to issue UPS commands it is necessary to have enabled a user with administrative privileges as above first.
In order to issue UPS commands it is necessary to have enabled the administrative privileges as above first and you get the possibility to run command from slave ups if access is set to private as above.
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
In the examples below, it is assumed your UPS name is '''UPS''', that it is local, that the administrative user is '''admin''' and password '''admin'''. You can verify your UPS name via:
{
{
$OUT = "";
my $allow = 'all';
my $pass = '0';
my $satisfy = 'all';
my $name = $nut{'Name'} || 'NUT UPS Daemon Monitoring';
for ('exit-if-none')
{
if ($nut{'PublicAccess'})
{
if ($nut{'PublicAccess'} eq 'none')
{
next;
}
elsif ($nut{'PublicAccess'} eq 'local')
{
$allow = $localAccess;
$pass = 0;
$satisfy = 'all';
}
elsif ($nut{'PublicAccess'} eq 'local-pw')
{
$allow = $localAccess;
$pass = 1;
$satisfy = 'all';
}
elsif ($nut{'PublicAccess'} eq 'global')
{
$allow = 'all';
$pass = 0;
$satisfy = 'all';
}
elsif ($nut{'PublicAccess'} eq 'global-pw')
{
$allow = 'all';
$pass = 1;
$satisfy = 'all';
}
elsif ($nut{'PublicAccess'} eq 'global-pw-remote')
{
$allow = $localAccess;
$pass = 1;
$satisfy = 'any';
}
}
$OUT .= "#------------------------------------------------------------\n";
$OUT .= "# nut multimon - $name\n";
$OUT .= "#------------------------------------------------------------\n";
{
if ((exists $nut{'URL'}) && ($nut{'URL'} ne <nowiki>''</nowiki>)) {
$OUT .= "Alias /$nut{'URL'} /opt/nut-cgi-bin\n";
}
}
$OUT .= "Alias /nut /opt/nut-cgi-bin\n";
$OUT .= "\n";
$OUT .= "<Directory /opt/nut-cgi-bin>\n";
$OUT .= " DirectoryIndex upsstats.cgi\n";
$OUT .= " Options +ExecCGI\n";
$OUT .= " order deny,allow\n";
$OUT .= " deny from all\n";
$OUT .= " allow from $allow\n";
if ($pass)
{
$OUT .= " AuthName $name\n";
$OUT .= " AuthType Basic\n";
$OUT .= " AuthExternal pwauth\n";
$OUT .= " require valid-user\n";
$OUT .= " Satisfy $satisfy\n";
}
$OUT .= "</Directory>\n";
}
}
}
