1,574
edits
Changes
From SME Server
Jump to navigationJump to searchSME Server:Documentation:Administration Manual:Chapter5 (view source)
Revision as of 19:23, 28 August 2014
, 19:23, 28 August 2014→Upgrade using command line restore via ssh or USB
* Install the SME 9.x OS from CD on the new hardware (on new server).
* Install the SME 9.x OS from CD on the new hardware (on new server).
* Answer No when asked if you want to restore from USB during the first boot.
* Answer No when asked if you want to restore from USB during the first boot.
* If you created or have the backup file on the old server, transfer the smeserver.tgz backup file via ssh from your old server to your new server. Both servers must be connected & remote access enabled
* If you created or have the backup file on the old server, transfer the smeserver.tgz backup file via ssh from your old server to your new server. Both servers must be connected & remote access enabled
* On the old server do:
* On the old server do:
scp -P zzzz /smeserver.tgz newserverIP:/
scp -P zzzz /smeserver.tgz newserverIP:/
(where zzzz = port number)
(where zzzz = port number)
* If you saved the backup file to USB, then transfer the smeserver.tgz backup file from USB to your new server
* If you saved the backup file to USB, then transfer the smeserver.tgz backup file from USB to your new server
