Tidied up the intro section and added link to: Raid:Manual_Rebuild
Line 1:
Line 1:
{{Level|Advanced}}
{{Level|Advanced}}
+
{{Warning box|Get it right or you will lose data. '''Take a backup!''' Keep in mind if you make a mistake you can loose a whole hard disk. A common error is to switch /dev/sda with /dev/sdb.}}
−
{{Warning box|Get it right or you will lose data. Take a backup, and keep in mind if you commit a mistake you can loose a whole hard disk, mainly if you switch /dev/sda with /dev/sdb for example}}
+
SME Servers Raid Options are largely automated, if you built your system with a single hard disk simply logon as ''admin'' and select ''Disk Redundancy'' to add a new drive to your RAID1 array. The same procedure is used if you have a disk failure in a RAID array and you have replaced that failed disk.
−
{{note box|SME Servers Raid Options are largely automated, if you built your system with a single hard disk, or have a hard disk failure, simply logon as ''admin'' and select ''Disk Redundancy'' to add a new drive to your RAID1 array.
+
But with the best laid plans things don't always go according to plan, these are the processes required to do it manually.
−
But with the best laid plans things don't always go according to plan, these are the processes required to do it manually}}