3,704
edits
Changes
From SME Server
Jump to navigationJump to search→Enable networking: Syntax highlight
or if you want to assign a IP address yourself.
or if you want to assign a IP address yourself.
<syntaxhighlight lang="Bash">
ifconfig eth0 192.168.1.2
ifconfig eth0 192.168.1.2
echo "nameserver 192.168.1.254" >> /etc/resolv.conf
echo "nameserver 192.168.1.254" >> /etc/resolv.conf
route add default gw 192.168.1.254 eth0
route add default gw 192.168.1.254 eth0
</syntaxhighlight>
To make your changes permanent you will need to edit the configuration file to make it active on boot. There is only the vi text editor, you can also install nano.
To make your changes permanent you will need to edit the configuration file to make it active on boot. There is only the vi text editor, you can also install nano.
<syntaxhighlight lang="Bash">
yum install nano
yum install nano
nano /etc/sysconfig/network-scripts/ifcfg-eth0
nano /etc/sysconfig/network-scripts/ifcfg-eth0
and set ONBOOT=”YES”
and set ONBOOT=”YES”
</syntaxhighlight>
For the current purposes I decided to start manually each time so I that left the base settings as untouched as possible.
For the current purposes I decided to start manually each time so I that left the base settings as untouched as possible.
