1,574
edits
Changes
From SME Server
Jump to navigationJump to searchSME Server:Documentation:Administration Manual:Chapter5 (view source)
Revision as of 23:10, 20 January 2013
, 23:10, 20 January 2013→Installing the Software
====Installing the Software====
====Installing the Software====
{{Note box|[[bugzilla 6401]] If your cdrom is set as hda then the following error message may appear in the console during startup: "Setting up Logical Volume Management: /dev/hda: open failed: No medium found 2 logical volumes(s) in volume group "main" now active"}}
{{Note box|Hardware that may include an internal tape drive may experience a Installer fail immediately after cd check or skipping cd check, see [[Bugzilla 6996]] disconnect the tape drive retry install again }}
{{Note box|If you are configuring your system with RAID1 support, notice that your step 4 below will be slightly different. If you skipped section 5.2 RAID1 Support (Disk Mirroring), it would be advisable to read it before proceeding.||
{{Note box|If you are configuring your system with RAID1 support, notice that your step 4 below will be slightly different. If you skipped section 5.2 RAID1 Support (Disk Mirroring), it would be advisable to read it before proceeding.||
}}
}}
