38
edits
Changes
From SME Server
Jump to navigationJump to searchVirtualBox 4.0 on SME Server v8 beta 6 (view source)
Revision as of 03:55, 9 September 2011
, 03:55, 9 September 2011no edit summary
<li>Install kernel-devel to get the latest development tree.</li>
<li>Install kernel-devel to get the latest development tree.</li>
Use this command only if you have PAE kernel installed:
Use this command only if you have a PAE kernel installed:
<pre>yum install kernel-PAE-devel</pre>
<pre>yum install kernel-PAE-devel</pre>
<li>Install <b>phpVirtualBox</b></li>
<li>Install <b>phpVirtualBox</b></li>
<pre>cd /tmp
<pre>cd /tmp
wget http://phpvirtualbox.googlecode.com/files/phpvirtualbox-4.0-7.zip
wget `wget -q -O - http://phpvirtualbox.googlecode.com/files/LATEST.txt` -O phpvirtualbox-latest.zip
unzip phpvirtualbox-4.0-7.zip
unzip phpvirtualbox-latest.zip</pre>
cd phpvirtualbox-4.0-7
Note: at the time of this writing, the latest version was 4.1-2. Please adjust the following for later versions.
<pre>
cd phpvirtualbox-4.1-2
cp –R * /home/e-smith/files/ibays/phpvbox/html</pre>
cp –R * /home/e-smith/files/ibays/phpvbox/html</pre>
<li>Create a <b>tmp</b> folder inside the /phpvbox/html folder.</li>
<li>Create a <b>tmp</b> folder inside the /phpvbox/html folder.</li>
<pre>cd /home/e-smith/files/ibays/phpvbox/html
<pre>cd /home/e-smith/files/ibays/phpvbox/html
mkdir tmp
mkdir tmp
chmod 777 tmp/
chmod 777 tmp/</pre>
</pre>
<li>Open ''config.php'' (located on your /phpvbox/html/ folder) and uncomment some lines & change the tmp location as per below.</li>
<li>Create a config file using the example file provided.</li>
<pre>cp config.php-example config.php</pre>
nano /home/e-smith/files/ibays/phpvbox/html/config.php</pre>
<li>Open ''config.php'' (located on your /phpvbox/html/ folder). Uncomment some lines (by removing the '#' at the beginning of the line).</li>
<pre>nano /home/e-smith/files/ibays/phpvbox/html/config.php</pre>
<pre>/* SOAP URL of vboxwebsrv (not phpVirtualBox's URL) */
<pre>/* SOAP URL of vboxwebsrv (not phpVirtualBox's URL) */
var $location = 'http://127.0.0.1:18083/';
var $location = 'http://127.0.0.1:18083/';</pre>
// Disable authentication
<pre>// Disable authentication
var $noAuth = true;
var $noAuth = true;</pre>
// Host / ip to use for console connections
Adjust the consoleHost ip address to an unused static ip address on your internal network
//var $consoleHost = '192.168.100.1';
<pre>// Host / ip to use for console connections
//var $consoleHost = '192.168.100.1';</pre>
var $enableAdvancedConfig = true;
<pre>/* Enable advanced configuration items (normally hidden in the VirtualBox GUI)
* Note that some of these items may not be translated to languages other than $
*/
var $enableAdvancedConfig = true;</pre>
// Authentication library.
<pre>// Authentication library.
//var $authLib = 'Builtin';
//var $authLib = 'Builtin';</pre>
// Allow VDE network configuration. This must be supported by the underlying VirtualBox installation!
<pre>// Allow VDE network configuration. This must be supported by the underlying VirtualBox installation!
var $enableVDE = true;
var $enableVDE = true;</pre>
// Path
Change the tmp location as per below.
var $cachePath = '../tmp';
<pre>// Path
</pre>
var $cachePath = '../tmp';</pre>
<li>Disable authentication of ''vboxwebsrv'' (this is not recommended, but at this stage, this is the only setup that works). Login to the server’s SSH and type this command.</li>
<li>Disable authentication of ''vboxwebsrv'' (this is not recommended, but at this stage, this is the only setup that works). Login to the server’s SSH and type this command.</li>
<pre>vboxmanage setproperty websrvauthlibrary null</pre>
<pre>vboxmanage setproperty websrvauthlibrary null</pre>
<li>Install VirtualBox extension pack to enable support for USB 2.0 devices, VirtualBox RDP and PXE boot for Intel cards.</li>
<!--
<pre>wget http://download.virtualbox.org/virtualbox/4.1.0/Oracle_VM_VirtualBox_Extension_Pack-4.1.0-73009.vbox-extpack
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
vboxmanage extpack install Oracle_VM_VirtualBox_Extension_Pack-4.1.0-73009.vbox-extpack</pre>
available for the current kernel (2.6.18-238.19.1.el5) or it failed to
load. Please recompile the kernel module and install it by
sudo /etc/init.d/vboxdrv setup
You will not be able to start VMs until this problem is fixed.
-->
<li>Install VirtualBox extension pack to enable support for USB 2.0 devices, VirtualBox RDP and PXE boot for Intel cards. Please install the extension pack with the same version as your installed version of VirtualBox!</li>
<pre>wget http://download.virtualbox.org/virtualbox/4.1.2/Oracle_VM_VirtualBox_Extension_Pack-4.1.2-73507.vbox-extpack -O latest.vbox-extpack
vboxmanage extpack install latest.vbox-extpack</pre>
<li>Enable <b>fopen</b> on ''php.ini'' (line 65) located on /etc/</li>
<li>Enable <b>fopen</b> on ''php.ini'' (line 65) located on /etc/</li>
