777
edits
Changes
From SME Server
Jump to navigationJump to searchno edit summary
{{Note box|This contrib was only applied and used on fresh SME (server only mode) install. Conflicts with other installed packages were not examined. The author strongly recommend to install this monitoring system on a dedicated server. It is entirely possible to run it on a virtualized system, which monitors the host itself. In this case you should set up a second Nagios server (acting as a watchdog) on an independent hardware (physically or virtualized) to monitor the main Nagios system}}
{{Note box|This contrib was only applied and used on fresh SME (server only mode) install. Conflicts with other installed packages were not examined. The author strongly recommend to install this monitoring system on a dedicated server. It is entirely possible to run it on a virtualized system, which monitors the host itself. In this case you should set up a second Nagios server (acting as a watchdog) on an independent hardware (physically or virtualized) to monitor the main Nagios system}}
{{Note Box|This contrib does not work on SME8b6 as documented here, there are a few changes needed to the repository info and also the yum commands, also a change needs to be made to the location of the nagios.pid file in order for it run successfully after installation. There is an outstanding bug [[bugzilla:5539]] which contains the necessary information}}
