Changes

The latest version of ''apcupsd'' is 3.14.8-1 (January 2010) and is available from sourceforge in two rpms - one for the UPS daemon and one for the web based monitoring scripts. Neither of these install exactly in line with the ''SME way'', and neither does the older version available on DAG.

The latest version of ''apcupsd'' is 3.14.8-1 (January 2010) and is available from sourceforge in two rpms - one for the UPS daemon and one for the web based monitoring scripts. Neither of these install exactly in line with the ''SME way'', and neither does the older version available on DAG.

These installation instructions make some additional modifications for SME. They have been tested on SME 7.5 and an APC SmartUPS 1500i with both a usb and a 940-0024C smart serial cable.

These installation instructions make some additional modifications for SME. They have been tested on SME 7.5 and an APC SmartUPS 1500i with both a usb and a 940-0024C smart serial cable. They have also been tested with an AP9617 Network Management Card using both the ''snmp'' and ''pcnet'' UPSTYPE drivers'

{{Note box|SME uses Nut as standard for UPS monitoring and control and works with a more than just APC UPS models. See [[Uninterruptable_Power_Supply]] for details }}

{{Note box|SME uses Nut as standard for UPS monitoring and control and works with a more than just APC UPS models. See [[Uninterruptable_Power_Supply]] for details }}

===Download and install===

===Download and install===