689
edits
Changes
From SME Server
Jump to navigationJump to searchUninterruptable Power Supply:APC (view source)
Revision as of 17:24, 10 May 2010
, 17:24, 10 May 2010Tidied Up
==To set up apcupsd on SME 7.4==
==To set up apcupsd on SME 7.4==
===Setup the DAG repository===
{{Repository|Dag}}
===Installation===
Install ''apcupsd''
yum install --enablerepo=dag --enablerepo=base apcupsd
yum install --enablerepo=dag --enablerepo=base apcupsd
Copy original ''conf'' file
cp apcupsd.conf apcupsd.conf.orig
cp apcupsd.conf apcupsd.conf.orig
Copy ''CGI'' files
cp /var/www/apcupsd/* /home/e-smith/files/ibays/Primary/cgi-bin/
cp /var/www/apcupsd/* /home/e-smith/files/ibays/Primary/cgi-bin/
Link the startup script
ln -s /etc/rc.d/init.d/e-smith-service /etc/rc7.d/S99apcupsd
ln -s /etc/rc.d/init.d/e-smith-service /etc/rc7.d/S99apcupsd
Set the Service in SME
config set apcupsd service status enabled
config set apcupsd service status enabled
===Configuration===
Edit /etc/apcupsd/apcupsd.conf. The conf file has good detail on setup options.
Edit /etc/apcupsd/apcupsd.conf. The conf file has good detail on setup options.
Set TIMEOUT to 10 for testing.
Set TIMEOUT to 10 for testing.
Reboot or /etc/init.d/apcupsd start to start the service.
Reboot or
/etc/init.d/apcupsd start
to start the service.
http://host.domain/cgi-bin/multimon.cgi gives a nice look at the UPS status, including a log of past events
===Usage===
http://yourdomain.tld/cgi-bin/multimon.cgi gives a nice look at the UPS status, including a log of past events
----
[[Category:Howto]]
[[Category:Howto]]
[[Category:Administration]]
