689
edits
Changes
From SME Server
Jump to navigationJump to searchUninterruptable Power Supply (view source)
Revision as of 01:24, 18 January 2010
, 01:24, 18 January 2010→Default Configuration (USB)
==Default Configuration (USB)==
==Default Configuration (USB)==
The default configuration in SME Server as set by the database properties for 'nut' is
The default configuration in SME Server for 'NUT' is set by the configuration database properties
Model = usbhid-ups
Model = usbhid-ups
status = disabled
status = disabled
type = service
type = service
{{Note box|Absence of a 'Master' property setting defaults the configuration to being a Master setup. That is a UPS connected directly to the server via USB or serial cable is assumed. See later for setting as a Slave.
{{Note box|Absence of a 'Master' property setting defaults the configuration to being a Master setup. That is a UPS connected directly to the server via USB or serial cable is assumed. See later for setting as a Slave.
The default is for nut to be disabled, that is no UPS connected}}
The default is for NUT to be disabled, that is no UPS connected}}
Most USB connected UPS's will work with these default settings. If using a USB connection just enable nut as follows:
Most USB connected UPS's will work with these default settings. If using a USB connection just enable NUT as follows:
config setprop nut status enabled
config setprop nut status enabled
