2,569
edits
Changes
From SME Server
Jump to navigationJump to searchSME Server:Documentation:Administration Manual:Chapter11 (view source)
Revision as of 16:02, 23 March 2007
, 16:02, 23 March 2007After changing the number of pptp clients allowed
{{DrawBoxNote|content=Your connection to the Internet needs to be established first before you initiate the PPTP connection. This may involve double-clicking one Dial-Up Networking icon to start your Internet connection, then double-clicking a second icon to start the PPTP connection. To shut down, disconnect your PPTP connection first, then disconnect from your ISP.}}
{{DrawBoxNote|content=Your connection to the Internet needs to be established first before you initiate the PPTP connection. This may involve double-clicking one Dial-Up Networking icon to start your Internet connection, then double-clicking a second icon to start the PPTP connection. To shut down, disconnect your PPTP connection first, then disconnect from your ISP.}}
{{DrawBoxNote|content=After changing the number of pptp clients allowed, the increased number of users is not updated until existing users have logged off.}}
{{DrawBoxNote|content=PPTP uses TCP port 1723 and the Generic Routing Encapsulation (GRE) protocol. If you are using an external router or gateway to your server, and require an inbound VPN connection to support external users, you will need both TCP port 1723 and the GRE protocol to be forwarded.
{{DrawBoxNote|content=PPTP uses TCP port 1723 and the Generic Routing Encapsulation (GRE) protocol. If you are using an external router or gateway to your server, and require an inbound VPN connection to support external users, you will need both TCP port 1723 and the GRE protocol to be forwarded.
