Changes

From SME Server
Jump to navigationJump to search
118 bytes added ,  09:19, 2 September 2008
m
no edit summary
Line 100: Line 100:     
If you are running this server is "server-gateway mode" you now need to open port 1194 for UDP traffic as this is the default tunnel for OpenVPN. Now go into the Server Manager panel under port forwarding and forward UDP/1194 to "localhost".  
 
If you are running this server is "server-gateway mode" you now need to open port 1194 for UDP traffic as this is the default tunnel for OpenVPN. Now go into the Server Manager panel under port forwarding and forward UDP/1194 to "localhost".  
If your server is in "server mode" you also need to fiddle with IPTables. Install the port opener that might end up in the "Unknown" section of the server-manager and open UDP/1194.
+
If your server is in "server mode" you also need to fiddle with IPTables. Install the port opener and ensure to update the navigation panel. You will now have a "Port Opening" in the "Configuration" sections of the server-manager. Use it to open UDP/1194.
    
  rpm -Uvh http://sme.swerts-knudsen.com/downloads/dmc-mitel-portopening-0.0.1-4.noarch.rpm
 
  rpm -Uvh http://sme.swerts-knudsen.com/downloads/dmc-mitel-portopening-0.0.1-4.noarch.rpm
 
+
/etc/e-smith/events/actions/navigation-conf
    
You now need to add the VPN address range as a local networks in the server-manager under the Security section.  
 
You now need to add the VPN address range as a local networks in the server-manager under the Security section.  
177

edits

Navigation menu