2,569
edits
Changes
Jump to navigation
Jump to search
mLine 3:
Line 3: − + + + − If using a serial port you have to set a Model and Device+ − + + + +
→Standard configuration
====Standard configuration====
====Standard configuration====
If using USB just enable nut
If using USB just enable nut
config setprop nut status enabled
config setprop nut status enabled
config setprop nut Model newhidups (default)
config setprop nut Device /var/lib/ups/hiddev0 (default/USB)
Not all UPS's are supported by USB or the newhidups driver, refer to the link below
Find your model here http://www.networkupstools.org/compat/stable.html <br />
eg. config setprop nut Model bcmxcp_usb is for some Powerware units on USB
or config setprop nut Model genericups is for other Powerware units that only work on serial
Find your Model here http://www.networkupstools.org/compat/stable.html <br />
Type is only used if your model is genericups <br />
Type is only used if your model is genericups <br />