1,574
edits
Changes
From SME Server
Jump to navigationJump to search
mLine 1:
Line 1: − We could add a section on enabling smartd to monitor disk health <br> − see http://bugs.contribs.org/show_bug.cgi?id=1445 <br> − http://www.linuxmanpages.com/man8/smartd.8.php <br> − http://www.captain.at/howto-linux-smartmontools-smartctl.php − ===Monitor Disk Health=== − Self-Monitoring, Analysis and Reporting Technology (SMART) is built into many ATA-3 and later ATA, IDE and SCSI-3 hard drives. The purpose of SMART is to monitor the reliability of the hard drive and predict drive failures, and to carry out different types of drive self-tests. − − To enable − config set smartd service − config setprop smartd status enabled − ln -s /etc/rc.d/init.d/e-smith-service /etc/rc.d/rc7.d/S40smartd − − This will log warnings to /var/log/messages. − − to send warning to admin. append the '''-m admin''' directive to DEVICESCAN in the config file − nano -w /etc/smartd.conf − DEVICESCAN -a -m admin -I 190 -I 194 − − To manually check disks − − View report − smartctl -a /dev/hdc − − Generate report − smartctl -t short /dev/hdc (1 minute) − smartctl -t long /dev/hdc (1 hour)
Remove talk no longer relevant
