Sme10BuildQueue

From SME Server
Jump to navigation Jump to search

This page lists all the packages that SME Server needs to build for SME 10. The starting point is the smeos directory from SME 9. For each package it should be checked if it is still needed, or can we use an upstream package if one is available.


Package Build Steps

check out package

cp -a sme9 sme10
rm -rf sme10/CVS
cd sme10
make clean
mv {sourcedir} {newsourcedir}
  • example e-smith-base-5.2.0 to e-smith-base-5.4.0
rm -f *.patch

{apply any fixes from spec to tree} {move lib/perl5/site_perl to share/perl5/vendor_perl}

tar Jcvf {newsource}.tar.xz {newsourcedir}
vi *.spec
  • remove patches and fixes applied directly to tree
  • bump version and reset release to 1
  • add changelog saying rolling for sme10
make new-sources FILES=*xz
  • will get errors here because no cvs (that's fine)
make mockbuild
  • if this works then we can proceed
rpm -qpl {noarch/x86_64}/{rpmname}.rpm
  • check that files look similar to the sme8 package


These following steps need developer access

They are here for reference, and transparency. They will need to be run on SME Server's build server. You do not need to do this part.

cd ..
cvs add sme10
cd sme10
date +%s
  • get date for import
vi import.log*
  • fix name/version/release and date
cvs add .cvsignore *.spec Makefile import.log sources
  • be sure to add any other needed packages
make commit tag build


  • Current status will be added soon

RPM's from smeos directory

Package Builder status Reference
bglibs-1.102-1.el6.sme.src.rpm daniel build ok
buffer-1.19-7.el6.sme.src.rpm stephdl build ok bugzilla:9233
buildsys-macros-6-1.el7.sme.src.rpm daniel build ok NOT in SMEOS
clamav-0.98.7-1.el6.sme.src.rpm daniel build ok
cpu-1.4.3-14.el6.sme.src.rpm daniel build ok
cvm-0.82-1.el6.sme.src.rpm daniel build ok
daemontools-0.76-6.el6.sme.src.rpm daniel build ok
dar-2.3.8-7.el7.sme.src.rpm daniel build ok NOT in SMEOS

copy from epel to smedev (dar-2.5.2-1.el7.x86_64.rpm)

diald-1.0-3.el6.sme.src.rpm daniel build ok
dietlibc-0.33-0.1600.20110311.el7.sme.src.rpm daniel build ok NOT in SMEOS
djbdns-1.05-8.el6.sme.src.rpm daniel build ok
dot-forward-0.71-4.el6.sme.src.rpm daniel build ok
e-smith-5.4.0-5.el6.sme.src.rpm daniel build ok
e-smith-apache-2.4.0-12.el6.sme.src.rpm daniel build ok bugzilla:9215
e-smith-backup-2.4.0-44.el6.sme.src.rpm daniel build ok
e-smith-base-5.6.0-24.el6.sme.src.rpm daniel build ok bugzilla:9216
e-smith-cvm-unix-local-2.4.0-1.el6.sme.src.rpm daniel build ok
e-smith-devtools-2.4.0-4.el6.sme.src.rpm daniel build ok
e-smith-dnscache-2.4.0-1.el6.sme.src.rpm daniel build ok
e-smith-domains-2.4.0-3.el6.sme.src.rpm daniel build ok
e-smith-dynamicdns-dyndns-2.4.0-1.el6.sme.src.rpm daniel build ok
e-smith-dynamicdns-dyndns.org-2.4.0-1.el6.sme.src.rpm daniel build ok
e-smith-dynamicdns-tzo-2.4.0-1.el6.sme.src.rpm daniel build ok
e-smith-dynamicdns-yi-2.4.0-1.el6.sme.src.rpm daniel build ok
e-smith-email-5.4.0-12.el6.sme.src.rpm daniel build ok bugzilla:9228
e-smith-flexbackup-2.4.0-3.el6.sme.src.rpm stephdl build ok
e-smith-formmagick-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-grub-2.4.0-3.el6.sme.src.rpm stephdl build ok
e-smith-horde-4.4.0-8.el6.sme.src.rpm stephdl build ok
e-smith-hosts-2.4.0-11.el6.sme.src.rpm stephdl build ok
e-smith-ibays-2.4.0-13.el6.sme.src.rpm stephdl build ok
e-smith-imp-5.4.0-2.el6.sme.src.rpm stephdl build ok
e-smith-ingo-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-ldap-5.4.0-19.el6.sme.src.rpm stephdl build ok
e-smith-lib-2.4.0-15.el6.sme.src.rpm stephdl build ok
e-smith-lib-compspec-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-LPRng-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-manager-2.6.0-1.el6.sme.src.rpm stephdl build ok
e-smith-mysql-2.4.0-9.el6.sme.src.rpm stephdl build ok
e-smith-ntp-2.4.0-6.el6.sme.src.rpm daniel build ok bugzilla:9227
e-smith-nutUPS-2.4.0-9.el6.sme.src.rpm stephdl build ok
e-smith-oidentd-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-openssh-2.4.0-6.el6.sme.src.rpm daniel build ok bugzilla:9226
e-smith-packetfilter-2.4.0-3.el6.sme.src.rpm stephdl build ok
e-smith-php-2.4.0-5.el6.sme.src.rpm stephdl build ok
e-smith-pop3-2.4.0-3.el6.sme.src.rpm stephdl build ok
e-smith-portforwarding-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-pptpd-2.4.0-2.el6.sme.src.rpm daniel build ok bugzilla:9225
e-smith-proftpd-2.4.0-3.el6.sme.src.rpm daniel build ok bugzilla:9224
e-smith-proxy-5.4.0-4.el6.sme.src.rpm daniel build ok bugzilla:9223
e-smith-qmail-2.4.0-6.el6.sme.src.rpm daniel build ok bugzilla:9222
e-smith-qmailanalog-2.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-quota-2.4.0-2.el6.sme.src.rpm stephdl build ok
e-smith-radiusd-2.4.0-10.el6.sme.src.rpm daniel build ok bugzilla:9221
e-smith-runit-2.4.0-2.el6.sme.src.rpm stephdl build ok
e-smith-samba-2.4.0-22.el6.sme.src.rpm daniel build ok bugzilla:9220
e-smith-starterwebsite-2.4.0-3.el6.sme.src.rpm stephdl build ok
e-smith-test-2.4.0-2.el6.sme.src.rpm stephdl build ok
e-smith-tinydns-2.4.0-8.el6.sme.src.rpm stephdl build ok
e-smith-turba-3.4.0-1.el6.sme.src.rpm stephdl build ok
e-smith-viewlogfiles-2.4.0-1.el6.sme.src.rpm stephdl build ok
fastforward-0.51-04.el6.sme.src.rpm stephdl build ok
flexbackup-1.2.1-1.el6.sme.src.rpm daniel build ok
headermatch-0.0.1-3.el6.sme.src.rpm daniel build ok
horde-3.3.11-2.el6.sme.src.rpm daniel build ok
imp-h3-4.3.9-1.el6.sme.src.rpm daniel build ok
ingo-h3-1.2.5-1.el6.sme.src.rpm daniel build ok
ipsvd-0.12.1-7.el6.sme.src.rpm daniel build ok
LPRng-3.8.35-2.el6.sme.src.rpm stephdl build ok bugzilla:9209
mbuffer-20100526-2.el6.sme.src.rpm daniel build ok
mod_perl-2.0.4-11.1.el6.sme.src.rpm FAILED BUILD, WONTFIX bugzilla:9235
perl-CGI-FormMagick-0.93-2.el6.sme.src.rpm daniel build ok
perl-IO-Socket-SSL-1.74-1.el6.sme.src.rpm stephdl build ok copy from centos to smedev (perl-IO-Socket-SSL-1.94-3.el7.noarch.rpm)
perl-Object-Persistence-0.92-5.el6.sme.src.rpm daniel build ok bugzilla:9210
perl-Passwd-Unix-0.71-2.src.rpm daniel build ok NOT in SMEOS
perl-Quota-1.6.7-2.el6.sme.src.rpm daniel build ok
perl-Struct-Compare-1.0.1-1.src.rpm daniel build ok
perl-Test-Harness-Straps-0.30-4.el6.sme.src.rpm daniel build ok
perl-Test-Inline-0.16-1.el6.sme.src.rpm daniel build ok copy from epel to smedev (perl-Test-Inline-2.213-3.el7.noarch.rpm)
ppp-2.4.5-24.el6.sme.src.rpm daniel FAILED BUILD, WONTFIX bugzilla:9211
pptpd-1.3.4-2.el7.sme.src.rpm daniel build ok copy from epel to smedev (pptpd-1.4.0-2.el7.x86_64.rpm)
pwauth-2.3.10-5.el6.sme.src.rpm stephdl build ok copy from epel to smedev (pwauth-2.3.10-9.el7.x86_64.rpm)
qmail-1.03-17.el6.sme.src.rpm daniel build ok
qmailanalog-0.70-8.el6.sme.src.rpm daniel build ok
qpsmtpd-0.84-15.el6.sme.src.rpm daniel build ok bugzilla:9236
qpsmtpd-plugins-0.0.1-4.el6.sme.src.rpm stephdl build ok
runit-2.1.2-1.el6.sme.src.rpm stephdl build ok
smeserver-audittools-1.4.0-3.el6.sme.src.rpm stephdl build ok
smeserver-clamav-2.4.0-4.el6.sme.src.rpm stephdl build ok
smeserver-dovecot-1.4.0-17.el6.sme.src.rpm stephdl build ok
smeserver-locale-2.4.0-22.el6.sme.src.rpm stephdl build ok
smeserver-qpsmtpd-2.4.0-11.el6.sme.src.rpm daniel build ok bugzilla:9230
smeserver-release-9.1-1.el6.sme.src.rpm stephdl build ok
smeserver-spamassassin-2.4.0-5.el6.sme.src.rpm stephdl build ok
smeserver-support-2.6.0-5.el6.sme.src.rpm stephdl build ok
smeserver-yum-2.4.0-11.el6.sme.src.rpm daniel build ok bugzilla:9229
smolt-1.4.3-5.el6.sme.src.rpm stephdl build ok
spamassassin-3.3.2-60.el6.sme.src.rpm daniel FAILED BUILD, WONTIFX bugzilla:9219
tai64nunix-0.70-5.el6.sme.src.rpm daniel build ok
turba-h3-2.3.5-1.el6.sme.src.rpm daniel build ok
ucspi-tcp-0.88-5.el6.sme.src.rpm daniel build ok
ulogd-1.24-13.el6.sme.src.rpm daniel build ok
whiptail-0.51.5-9.el7.sme.src.rpm daniel build ok NOT in SMEOS
xlhtml-0.5-11.el6.sme.src.rpm daniel build ok

Bare install test

install a minimal Centos7 configure network access during installation with option to restore.

 yum update -y
yum install nano net-tools mc man htop top iftop iptraf screen openssh-clients mlocate wget vim
  • Enable SSH

SSH is present but is disabled at this stage. To enable ssh issue:

service sshd start

You may have a slow login to ssh, if needed :

vi /etc/ssh/sshd_config

You have to restart the ssh service or the server

  • Reboot system to ensure all new config are permanent
reboot

update packages

yum update

install SME10 repo

vim /etc/yum.repos.d/smeserver10

and paste

[smedev]
enabled=0
baseurl=http://mirror.canada.pialasse.com/releases/testing/10/smedev/$basearch
name=SME Server - dev
gpgcheck=1
enablegroups=1
[smetest]
enabled=0
baseurl=http://mirror.canada.pialasse.com/releases/testing/10/smetest/$basearch
name=SME Server - dev
gpgcheck=1
enablegroups=1
[smeos]
enabled=1
baseurl=http://mirror.canada.pialasse.com/releases/testing/10/smeos/$basearch
name=SME Server - dev
gpgcheck=1
enablegroups=1


install SME10 key

wget http://mirror.contribs.org/releases/testing/10/smeos/x86_64/RPM-GPG-KEY-koozali
rpm --import RPM-GPG-KEY-koozali

install EPEL7 repo

yum install epel-release

install Repoforge 7 repo is no more maintained. However, for test purpose

rpm -ivh http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm

install ELRepo

rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-2.el7.elrepo.noarch.rpm

then

yum clean all

try installing SME10 packages, you might need to enable some repo using --enablerepo=smedev,epel,elrepo ...

yum install e-smith-base

report here

Required dependencies

  Note:
The below list is based on SME10 testing smedev packages and default minimal install of CentOS 7. Enabling the epel and rpmforge repositories will resolve a number of dependencies.


test installation on 2016/06/08

use of http://pkgs.org to fill the blank

fill bug before building e new package : https://bugs.contribs.org/enter_bug.cgi?product=SME%20Server%2010.X&component=build

Package Requiring Required Package Possible sources status Reference
smeserver-qpsmtpd-2.6.0-1.el7.sme.noarch perl-MIME-tools in EPEL7 NEEDCOPY perl-MIME-tools-5.505-1.el7.noarch.rpm
e-smith-lib-2.6.0-1.el7.sme.noarch perl(Authen::PAM) in EPEL7 NEEDCOPY perl-Authen-PAM-0.16-16.el7.x86_64.rpm
e-smith-apache-2.6.0-1.el7.sme.noarch mod_authnz_external in EPEL7 NEEDCOPY mod_authnz_external-3.3.1-7.el7.x86_64.rpm
e-smith-base-5.8.0-1.el7.sme.noarch

e-smith-formmagick-2.6.0-1.el7.sme.noarch

e-smith-lib-2.6.0-1.el7.sme.noarch

perl(Crypt::Cracklib) in EPEL6 et Repoforge6 perl-Crypt-Cracklib-1.7-1.el6.i686.rpm
e-smith-lib-2.6.0-1.el7.sme.noarch perl(I18N::AcceptLanguage) in Repoforge6 perl-I18N-AcceptLanguage-1.04-1.el6.rf.noarch.rpm
smolt-server-1.4.3-5.el7.sme.noarch mx in centos6 WONTFIX smolt server is deprecated, even if we use the client for a while, we need to find an alternative
e-smith-base-5.8.0-1.el7.sme.noarch vconfig in centos7 NOTABUG vconfig-1.9-16.el7.x86_64.rpm
e-smith-horde-4.6.0-1.el7.sme.noarch php-pear(HTTP) in EPEL7 NEEDCOPY php-pear-HTTP-1.4.1-12.el7.noarch.rpm
e-smith-horde-4.6.0-1.el7.sme.noarch wv in EPEL6 wv-1.2.7-2.el6.i686.rpm

MSWord 6/7/8/9 binary file format to HTML converter

smolt-server-1.4.3-5.el7.sme.noarch python-genshi in EPEL7 WONTFIX python-genshi-0.7-3.el7.x86_64.rpm

we will not port the server for sme

e-smith-backup-2.6.0-1.el7.sme.noarch perl(Unix::PasswdFile) NOT AVAILABLE
e-smith-lib-2.6.0-1.el7.sme.noarch

e-smith-base-5.8.0-1.el7.sme.noarch

e-smith-lib-2.6.0-1.el7.sme.noarch

perl(Net::IPv4Addr) >= 0.10 in EPEL7 NEEDCOPY perl-Net-IPv4Addr-0.10-19.el7.noarch.rpm
e-smith-radiusd-2.6.0-1.el7.sme.noarch radiusclient-ng >= 0.5.6 in EPEL7 NEEDCOPY radiusclient-ng-0.5.6-9.el7.x86_64.rpm
e-smith-manager-2.8.0-1.el7.sme.noarch perl-suidperl in functionality not available on C7
smeserver-spamassassin-2.6.0-1.el7.sme.noarch razor-agents >= 2.61-1 in atrpms7 razor-agents-2.85-18.el7.x86_64.rpm
perl-CGI-FormMagick-0.93-2.el7.sme.noarch

e-smith-lib-2.6.0-1.el7.sme.noarch

perl(Text::Template) in EPEL7 NEEDCOPY perl-Text-Template-1.45-12.el7.noarch.rpm
e-smith-base-5.8.0-1.el7.sme.noarch


smolt-1.4.3-5.el7.sme.noarch

hal NOT AVAILABLE Hal has been dropped, it's no longer available in C7. move to systemd

need a workaround on this

e-smith-domains-2.6.0-1.el7.sme.noarch perl(HTML::Tabulate) >= 0.23 in Repoforge6 perl-HTML-Tabulate-0.35-1.el6.rf.noarch.rpm
dar-2.5.2-1.el7.x86_64 par2cmdline in EPEL7 NEEDCOPY par2cmdline-0.4.tbb.20100203-19.el7.x86_64.rpm
e-smith-base-5.8.0-1.el7.sme.noarch pam_abl in Repoforge6 pam_abl-0.2.3-1.el6.rf.x86_64.rpm
e-smith-nutUPS-2.6.0-2.el7.sme.noarch nut in EPEL7 NEEDCOPY nut-2.7.2-3.el7.x86_64.rpm
smolt-server-1.4.3-5.el7.sme.noarch python-turboflot in Centos6 WONTFIX => we wont port the server for sme10
e-smith-oidentd-2.6.0-1.el7.sme.noarch oidentd >= 2.0.6 in EPEL6 oidentd-2.0.8-8.el6.x86_64.rpm
e-smith-lib-2.6.0-1.el7.sme.noarch

perl-Mojolicious-6.44-2.el7.sme.noarch

perl(Taint::Util) in EPEL7 NEEDCOPY perl-Taint-Util-0.08-3.el7.x86_64.rpm
e-smith-email-5.6.0-1.el7.sme.noarch perl(Net::Server::Fork) in EPEL7 NEEDCOPY perl-Net-Server-2.007-2.el7.noarch.rpm
e-smith-imp-5.6.0-1.el7.sme.noarch php-pear(HTTP_Request) in EPEL7 NEEDCOPY php-pear-HTTP-Request-1.4.4-8.el7.noarch.rpm

php-pear-HTTP-Request2-2.2.1-1.el7.noarch.rpm

perl-Test-Inline-2.213-3.el7.noarch perl(Algorithm::Dependency) >= 1.02 in EPEL7 NEEDCOPY perl-Algorithm-Dependency-1.110-15.el7.noarch.rpm
e-smith-mysql-2.6.0-1.el7.sme.noarch mysql-server in centos7 NOTABUG yum install mysql-server
smeserver-spamassassin-2.6.0-1.el7.sme.noarch pyzor in centos7 NOTABUG pyzor-0.5.0-10.el7.noarch.rpm
perl-Test-Inline-2.213-3.el7.noarch perl(File::Flat) in EPEL7 NEEDCOPY perl-File-Flat-1.04-15.el7.noarch.rpm
smeserver-qpsmtpd-2.6.0-1.el7.sme.noarch perl-File-MMagic in EPEL7 NEEDCOPY perl-File-MMagic-1.30-1.el7.noarch.rpm
e-smith-viewlogfiles-2.6.0-1.el7.sme.noarch perl(Time::TAI64) in EPEL7 NEEDCOPY perl-Time-TAI64-2.11-1.el7.noarch.rpm
perl-CGI-FormMagick-0.93-2.el7.sme.noarch perl(CGI::Persistent) >= 1.00 in Reporforge6 should we switch to perl-CGI-Session-4.35-6.el6.noarch.rpm available in epel7 , not sure if it is similar enough
perl-Test-Inline-2.213-3.el7.noarch perl(Algorithm::Dependency::Source) in EPEL7 NEEDCOPY perl-Algorithm-Dependency-1.110-15.el7.noarch.rpm
perl-CGI-FormMagick-0.93-2.el7.sme.noarch perl(Mail::RFC822::Address) in Repoforge6 perl-Mail-RFC822-Address-0.3-1.el6.rf.noarch.rpm
e-smith-horde-4.6.0-1.el7.sme.noarch php-pear(Date) in EPEL7 NEEDCOPY php-pear-Date-1.4.7-12.el7.noarch.rpm
perl-Mojolicious-6.44-2.el7.sme.noarch perl(Net::DNS::Native) >= 0.15 NOT AVAILABLE ou ALT Linux Sisyphus
e-smith-nutUPS-2.6.0-2.el7.sme.noarch nut-client in EPEL7 NEEDCOPY nut-client-2.7.2-3.el7.x86_64.rpm
e-smith-ldap-5.6.0-1.el7.sme.noarch db4-utils libdb4-utils in EPEL7 FIXED new name libdb4-utils-4.8.30-13.el7.x86_64.rpm in EPEL7

Bugzilla:9319, changed Requires: libdb4-utils

perl-Test-Inline-2.213-3.el7.noarch perl(Algorithm::Dependency::Ordered) in EPEL7 NEEDCOPY perl-Algorithm-Dependency-1.110-15.el7.noarch.rpm
e-smith-horde-4.6.0-1.el7.sme.noarch php-pear(Services_Weather) in EPEL7 NEEDCOPY php-pear-Services-Weather-1.4.7-2.el7.noarch.rpm
e-smith-horde-4.6.0-1.el7.sme.noarch php-pear(File) in EPEL7 NEEDCOPY php-pear-File-1.4.1-5.el7.noarch.rpm
e-smith-manager-2.8.0-1.el7.sme.noarch perl(Apache::AuthTkt) in Repoforge6 Build OK Bugzilla:9311
smolt-1.4.3-5.el7.sme.noarch python-simplejson in Centos 7 NOTABUG python-simplejson-3.3.3-1.el7.x86_64.rpm
e-smith-lib-2.6.0-1.el7.sme.noarch perl(Mail::RFC822::Address) in Repoforge6 perl-Mail-RFC822-Address-0.3-1.el6.rf.noarch.rpm
e-smith-base-5.8.0-1.el7.sme.noarch pv in EPEL7 NEEDCOPY pv-1.4.6-1.el7.x86_64.rpm
e-smith-formmagick-2.6.0-1.el7.sme.noarch

e-smith-formmagick-2.6.0-1.el7.sme.noarch

e-smith-test-2.6.0-1.el7.sme.noarch

perl(WWW::Automate) >= 0.20 in Repoforge C6
imp-h3-4.3.9-1.el7.sme.noarch php-imap >= 4.3.0 in EPEL7 NEEDCOPY php-imap-5.4.16-3.el7.x86_64.rpm

imp-h3 should be drop for horde 5 or else

qpsmtpd-0.84-18.el7.sme.noarch perl(Net::IP) in EPEL7 NEEDCOPY perl-Net-IP-1.26-4.el7.noarch.rpm
e-smith-horde-4.6.0-1.el7.sme.noarch php-pear(Log) in EPEL7 NEEDCOPY php-pear-Log-1.12.8-1.el7.noarch.rpm
smeserver-audittools-1.6.0-1.el7.sme.noarch perl(RPM2) in LUX7 perl-RPM2-1.0-12.el7.lux.1.x86_64.rpm
e-smith-pptpd-2.6.0-1.el7.sme.noarch pptpd in smedev10 OK pptpd-1.3.4-2.el7.sme.src.rpm / daniel /build ok
smeserver-spamassassin-2.6.0-1.el7.sme.noarch perl(IP::Country) in ATRPM7 perl-IP-Country-2.27-1.el7.noarch.rpm
smeserver-spamassassin-2.6.0-1.el7.sme.noarch perl(Net::Ident) in ATRPM7 or Repoforge6 perl-Net-Ident-1.20-1.el7.noarch.rpm
e-smith-base-5.8.0-1.el7.sme.noarch /usr/sbin/cpuspeed in smedev10 Build OK Bugzilla:9318
perl-Test-Inline-2.213-3.el7.noarch perl(Algorithm::Dependency::Item) in EPEL7 NEEDCOPY perl-Algorithm-Dependency-1.110-15.el7.noarch.rpm
e-smith-manager-2.8.0-1.el7.sme.noarch


e-smith-base-5.8.0-1.el7.sme.noarch

pwauth in smedev10 OK pwauth-2.3.10-5.el6.sme.src.rpm stephdl build ok
perl-Test-Inline-2.213-3.el7.noarch perl(File::chmod) in EPEL7 NEEDCOPY perl-File-chmod-0.40-1.el7.noarch.rpm
e-smith-grub-2.6.0-1.el7.sme.noarch grub grub2 in CentOS7 FIXED C7 has moved to grub2

Bugzilla:9320 changed Requires: grub2 WILL NEED TO ADPT!

perl-CGI-FormMagick-0.93-2.el7.sme.noarch perl(Class::ParamParser) in Repoforge6 perl-Class-ParamParser-1.041-1.el6.rf.noarch.rpm
mbuffer-20100526-2.el7.sme.x86_64 libmhash.so.2()(64bit) in EPEL7 NEEDCOPY mhash-0.9.9.9-10.el7.x86_64.rpm
e-smith-email-5.6.0-1.el7.sme.noarch perl(Net::Server) >= 0.85 in EPEL7 NEEDCOPY perl-Net-Server-2.007-2.el7.noarch.rpm
e-smith-pop3-2.6.0-1.el7.sme.noarch checkpassword-pam in smedev10 Build OK Bugzilla:9322
e-smith-proftpd-2.6.0-1.el7.sme.noarch proftpd in EPEL7 NEEDCOPY proftpd-1.3.5a-2.el7.x86_64.rpm
e-smith-manager-2.8.0-1.el7.sme.noarch mod_auth_tkt in Repoforge6 Build OK Bugzilla:9310
smeserver-spamassassin-2.6.0-1.el7.sme.noarch DCC in Atrpms7 Atomic7 DCC-1.3.145-25.el7.x86_64.rpm

dcc-1.3.158-5.el7.art.x86_64.rpm

smeserver-qpsmtpd-2.6.0-1.el7.sme.noarch perl-Convert-TNEF in EPEL7 NEEDCOPY perl-Convert-TNEF-0.18-2.el7.noarch.rpm

Notes