Changes

Jump to navigation Jump to search

Seafile (view source)

Revision as of 08:10, 27 March 2018

7,645 bytes added ,  08:10, 27 March 2018
→‎Start server
Line 119: Line 119:  
yum remove python27-python-devel scl-utils-build
 
yum remove python27-python-devel scl-utils-build
 
</syntaxhighlight>
 
</syntaxhighlight>
 +
 +
well I got some errors and the files in github says different from doc
 +
 +
<nowiki>:</nowiki> test-requirements.txt and      requirements.txt for 5.1 branch (NB server asks for requests==2.8.0 while seahub for 2.3.0)<syntaxhighlight lang="bash">
 +
scl enable python 27
 +
 +
 +
pip install mock==1.0.1
 +
pip install nose==1.3.7
 +
pip install exam==0.10.5
 +
pip install splinter==0.7.2
 +
pip install requests==2.3.0
 +
pip install pytest==2.7.0
 +
pip install pytest-django==2.8.0
 +
pip install python-dateutil
 +
pip install python-memcached==1.57
 +
pip install chardet
 +
pip install six
 +
pip install Pillow>=2.6.1,<3.0.0
 +
pip install Django==1.8.10
 +
pip install django-compressor==1.4
 +
pip install django-post-office==2.0.3
 +
pip install django-statici18n==1.1.2
 +
pip install djangorestframework==3.3.1
 +
pip install git+git://github.com/haiwen/django-constance.git@751f7f8b60651a2828e4a535a47fc05b907883da#egg=django-constance[database]
 +
pip install openpyxl==2.3.0
 +
pip install pytz==2015.7
 +
 +
 +
pip install termcolor==1.1.0
 +
pip install prettytable==0.7.2
 +
pip install pexpect==4.0
 +
pip install httpie
 +
pip install django-constance[database]
 +
 +
</syntaxhighlight>seafile server would need pip install MySQL-python==1.2.5, which will need mysql devel to compile
 +
 +
I also see some memcached service is needed...  seahub/avatar/sql/migration.md
    
====  startup scripts and sme related db ====
 
====  startup scripts and sme related db ====
 +
config set seafile service TCPPort 8000 status enabled access private
 +
 +
signal-event remoteaccess-update
    
==== configuration ====
 
==== configuration ====
    
==== Start server ====
 
==== Start server ====
−
<syntaxhighlight lang="bash">
+
<syntaxhighlight lang="antlr-objc">
−
cd /opt/rh/python27/root/usr/lib/python2.7/site-packages/
  −
ln /usr/lib/python2.6/site-packages/seaserv seaserv -s
  −
ln /usr/lib/python2.6/site-packages/seafile seafile -s
  −
ln /usr/lib/python2.6/site-packages/ccnet ccnet -s
  −
cd /opt/rh/python27/root/usr/lib64/python2.7/site-packages/
  −
ln /usr/lib64/python2.6/site-packages/pysearpc pysearpc -s
  −
 
   
scl enable python27 bash
 
scl enable python27 bash
 
mkdir /opt/seafile/;  
 
mkdir /opt/seafile/;  
 
cd  /opt/seafile/;  
 
cd  /opt/seafile/;  
 
mkdir seafile-server/
 
mkdir seafile-server/
 +
mkdir logs pids
 
mkdir seafile-server/runtime
 
mkdir seafile-server/runtime
 +
mkdir -p /opt/seafile/seafile-data/library-template
 
cd seafile-server/
 
cd seafile-server/
 
ln /usr/share/seafile-seahub seahub -s
 
ln /usr/share/seafile-seahub seahub -s
 
cd /opt/seafile/
 
cd /opt/seafile/
   −
export PYTHONPATH=/usr/share/seafile-seahub/thirdpart
+
export PYTHONPATH=/opt/seafile/seafile-server/seahub/thirdpart:$PYTHONPATH
 +
export CCNET_CONF_DIR=/opt/seafile/conf/
 +
export SEAFILE_CONF_DIR=/opt/seafile/conf/
    
seafile-admin setup
 
seafile-admin setup
   −
touch seahub.db
+
python seafile-server/seahub/manage.py syncdb
−
</syntaxhighlight>-----------------------------------------------------------------
+
</syntaxhighlight>
 +
 
 +
issue: seafile-admin setup makes creation of seahub.db in /usr
 +
 
 +
<nowiki>-----------------</nowiki>
 +
 
 +
<nowiki>------------------------------------------------</nowiki>
    
<nowiki>-----------------------------------------------------------------</nowiki>
 
<nowiki>-----------------------------------------------------------------</nowiki>
Line 184: Line 228:     
==== configure httpd reverse proxy ====
 
==== configure httpd reverse proxy ====
 +
the easy way is :<syntaxhighlight lang="bash">
 +
db domains setprop seafile.itx.pialasse.com  Nameservers local ProxyPassTarget http://127.0.0.1:8000/ TemplatePath ProxyPassVirtualHosts
 +
 +
signal-event domain-modify seafile.itx.pialasse.com
 +
</syntaxhighlight>more long way:
 +
 +
<syntaxhighlight lang="bash">
 +
mkdir /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/VirtualHosts/ -p
 +
cat  > /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/VirtualHosts/28SeafileProxyPass <<- 'EndOfMessage'
 +
# Seahub for Seafile ProxyPass
 +
{
 +
    $haveSSL = (exists ${modSSL}{status} and ${modSSL}{status} eq "enabled") ?  'yes' : 'no';
 +
    $seahubPort = ${'seafile'}{TCPPort} || '8000';
 +
    $OUT = '';
 +
    if ((${'seafile'}{'status'} || 'disabled') eq 'enabled' ){
 +
 +
        if (($port eq "80") && ($haveSSL eq 'yes')){
 +
            $OUT .= "    RewriteRule ^/seafile(/.*|\$)    https://%{HTTP_HOST}/seafile\$1 [L,R]\n";
 +
        }
 +
        else{
 +
            $OUT .= "    ProxyPass /seafile http://127.0.0.1:$seahubPort\n";
 +
            $OUT .= "    ProxyPassReverse /seafile http://127.0.0.1:$seahubPort\n";
 +
        }
 +
 +
        $OUT .=<<"HERE";
 +
 +
    <Location /seafile>
 +
        SSLRequireSSL on
 +
        order deny,allow
 +
        deny from all
 +
        allow from $localAccess $externalSSLAccess
 +
    </Location>
 +
 +
HERE
 +
    }
 +
}
 +
EndOfMessage
 +
expand-template /etc/httpd/conf/httpd.conf
 +
service httpd-e-smith restart
 +
</syntaxhighlight>and then you have to change the configuration to show correctly the images
 +
 +
alternatively if you want to use a domain this way : seafile.mydomain.com<syntaxhighlight lang="bash">
 +
mkdir /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/VirtualHosts/ -p
 +
cat  > /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/VirtualHosts/28SeafileProxyPass <<- 'EndOfMessage'
 +
# Seahub for Seafile ProxyPass
 +
{
 +
    $haveSSL = (exists ${modSSL}{status} and ${modSSL}{status} eq "enabled") ?  'yes' : 'no';
 +
    $seahubPort = ${'seafile'}{TCPPort} || '8000';
 +
    $seahubdomain = ${'seafile'}{domain} || 'disabled';   
 +
    $OUT = '';
 +
    if ((${'seafile'}{'status'} || 'disabled') eq 'enabled' && $seahubdomain eq 'disabled' ){
 +
 +
        if (($port eq "80") && ($haveSSL eq 'yes')){
 +
            $OUT .= "    RewriteRule ^seafile(/.*|\$)    https://%{HTTP_HOST}seafile\$1 [L,R]\n";
 +
        }
 +
        else{
 +
            $OUT .= "    ProxyPass /seafile http://127.0.0.1:$seahubPort\n";
 +
            $OUT .= "    ProxyPassReverse /seafile http://127.0.0.1:$seahubPort\n";
 +
        }
 +
 +
        $OUT .=<<"HERE";
 +
 +
    <Location /seafile>
 +
        SSLRequireSSL on
 +
        order deny,allow
 +
        deny from all
 +
        allow from $localAccess $externalSSLAccess
 +
    </Location>
 +
 +
HERE
 +
    }
 +
    elseif ($seahubdomain ne 'disabled' ) {
 +
        if (($port eq "80") && ($haveSSL eq 'yes')){
 +
            $OUT .= "    RewriteRule ^(/.*|\$)    https://$seahubdomain\$1 [L,R]\n";
 +
        }
 +
        else{
 +
            $OUT .= "    ProxyPass / http://127.0.0.1:$seahubPort\n";
 +
            $OUT .= "    ProxyPassReverse / http://127.0.0.1:$seahubPort\n";
 +
        }
 +
    }
 +
}
 +
EndOfMessage
 +
expand-template /etc/httpd/conf/httpd.conf
 +
service httpd-e-smith restart
 +
</syntaxhighlight>
 +
 +
==== service start ====
 +
<syntaxhighlight lang="bash">
 +
cat > /etc/rc.d/init.d/seafile << 'EOF'
 +
#!/bin/bash
 +
### BEGIN INIT INFO
 +
# Provides:          seafile-server
 +
# Required-Start:    $remote_fs $syslog
 +
# Required-Stop:    $remote_fs $syslog
 +
# Default-Start:    2 3 4 5
 +
# Default-Stop:      0 1 6
 +
# Short-Description: Seafile server
 +
# Description:      Start Seafile server
 +
### END INIT INFO
 +
 +
# Change the value of "user" to your linux user name
 +
user=root
 +
 +
# Change the value of "seafile_dir" to your path of seafile installation
 +
# usually the home directory of $user
 +
seafile_dir=/opt/seafile
 +
script_path=${seafile_dir}/seafile-server-latest
 +
seafile_init_log=${seafile_dir}/logs/seafile.init.log
 +
seahub_init_log=${seafile_dir}/logs/seahub.init.log
 +
 +
 +
#
 +
# Write a polite log message with date and time
 +
#
 +
echo -e "\n \n About to perform $1 for seafile at `date -Iseconds` \n " >> ${seafile_init_log}
 +
echo -e "\n \n About to perform $1 for seahub at `date -Iseconds` \n " >> ${seahub_init_log}
 +
 +
# Python
 +
sclname='python27'
 +
. /opt/rh/$sclname/enable
 +
export X_SCLS="$X_SCLS $sclname"
 +
 +
# we want start daemon only inside "scl enable" invocation
 +
if ! scl_enabled python27 ; then
 +
    echo "Collection python27 has to be listed in /opt/rh/python27/service-environment"
 +
    exit 1
 +
fi
 +
cd /opt/seafile
 +
export TOPDIR=/opt/seafile
 +
export INSTALLPATH=/opt/seafile
 +
export PYTHONPATH=/opt/seafile:/opt/seafile/seafile-server/seahub/thirdpart:$PYTHONPATH
 +
export CCNET_CONF_DIR=/opt/seafile/conf/
 +
export SEAFILE_CONF_DIR=/opt/seafile/seafile-data/
 +
export SEAFILE_CENTRAL_CONF_DIR=/opt/seafile/conf/
 +
export SEAHUB_LOG_DIR=/opt/seafile/logs
 +
export SEAFILE_PIDFILE=/opt/seafile/pids/controller.pid
 +
 +
case "$1" in
 +
        start)
 +
                /usr/bin/seafile-admin start
 +
        ;;
 +
        restart)
 +
                /usr/bin/seafile-admin stop
 +
                /usr/bin/seafile-admin start
 +
        stop)
 +
                /usr/bin/seafile-admin stop
 +
 +
        ;;
 +
        *)
 +
                echo "Usage: /etc/init.d/seafile {start|stop|restart}"
 +
                exit 1
 +
        ;;
 +
esac
 +
EOF
 +
 +
chkconfig seafile on
 +
ln -s /etc/rc.d/init.d/seafile /etc/rc.d/rc7.d/S85seafile
 +
</syntaxhighlight>
 +
 +
==== add ldap support ====
 +
simply add this to /opt/seafile/conf/ccnet.conf<syntaxhighlight lang="bash">
 +
[LDAP]
 +
HOST = ldap://localhost
 +
BASE = ou=Users,dc=domain,dc=tld
 +
LOGIN_ATTR = mail
 +
FILTER = objectClass=inetOrgPerson
 +
 +
</syntaxhighlight>
 +
 +
==== add log to syslog ====
 +
see https://manual.seafile.com/maintain/logs.html and more : https://manual.seafile.com/deploy/using_syslog.html
 +
 +
there are 2 files to edit. Then arrange logrotate
    
=== Installation ===
 
=== Installation ===
Line 190: Line 407:  
latter you will be able to do this:
 
latter you will be able to do this:
 
  yum --enablerepo=smecontribs install smeserver-seafile-server {{#var:smecontribname}}
 
  yum --enablerepo=smecontribs install smeserver-seafile-server {{#var:smecontribname}}
 +
 +
=== Client usage ===
 +
If you want to connect locally you need to do the following:<syntaxhighlight lang="bash">
 +
cd ~
 +
mkdir ~/seafile-client
 +
seaf-cli init -d ~/seafile-client
 +
seaf-cli start
 +
seaf-cli download -l "the id of the library" -s  "the url + port of server" -d "the folder where the library folder will be downloaded" -u "username on server" [-p "password"]
 +
seaf-cli status
 +
</syntaxhighlight>
    
=== Uninstall ===
 
=== Uninstall ===
Line 210: Line 437:  
[[Category: Contrib]]
 
[[Category: Contrib]]
 
<!-- Please keep there the template revision  number as is -->
 
<!-- Please keep there the template revision  number as is -->
 +
=== TODO ===
 +
* compile seafdav
 +
* add pythonmodules for seafdav
 +
* patch controller of seafile-server to force pid folder
Unnilennium
Super Admin, Wiki & Docs Team, Bureaucrats, Interface administrators, Administrators
3,250

edits

Retrieved from "https://wiki.koozali.org/Special:MobileDiff/34434...34570"

Navigation menu