Samba4 Development

Introduction

This wiki page will be used to track the integration effort of Samba 4 into SME 9+

	Note:
	At this point, I'm just going to randomly ramble on this wiki page as I work on Samba 4. Once I get some workable pieces, I'll go back and format this page so that it makes more sense. - Gzartman

Lead developer: Gzartman

Samba 4 Packages

Upstream Centos 6 & 7 do not provide support for the full version of Samba 4. Packages available in the upstream repos are a crippled version of Samba 4, with many of the features associates with Active Directory disabled. The reason for this is detailed here. A solution to provide Samba 4 active directory does not look to be forthcoming by viewing Samba status in the Fedora project.

To further development of support for Samba 4 on the Koozali SME Server, Samba 4 packages from Sernet were selected. These packages will not immediately install cleaning on SME 9 due to the customization of Centos associated with SME 9, so the Sernet packages where re-built for SME 9. Details of this rebuild along with a link to the rebuilt packages are located in bugzilla:8075

After rebuilding, these packages do install cleanly but the services will not start using the init.d scripts provided with the packaged due to changes made during the re-build of the packages for SME 9. A Daemontools run script will need to be developed to start the Samba 4 service.

General Development Notes

Template Fragments

/etc/smb.conf

Complete rewrite of all template fragments

smb.conf Considerations

The smb.conf configuration file can be simplified significantly for Samba 4. Of specific interest are the following new parameters:

Server Services: This parameter is not very well documented, but from what I could find thefollow services can be provided by the Samba daemon: s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, ntp_signd, kcc, dnsupdate, dns, smb, nmb, winbind. The default for this parameter is: server services = s3fs rpc nbt wrepl ldap cldap kdc drepl winbind ntp_signd kcc dnsupdate dns. Services can be added/remove from the default by a +/- and the service to add/remove. Example server services = -s3fs (remove) +smb (add). Note that the smb, nmb, and windbind services are services equivalent to the older, Samba 3, type services (stand alone daemons). Of specific interest to SME 9 may be the use of the nmb service for WINS support. As we begin testing we may need to enable this service and possibly smb for simple share access.

Server Role: Samba 4 currently only supports the active directory domain controller server role. For now, we'll force Samba config into DC server role, but provide a fragment for expansion later. There is a long explanation behind this, but for now, restriction doesn't hurt us. SME as a DC will provide auth for both domain membership and simple shares by either joining the domain or logging into the server every time.

/etc/raddb/radius.conf

Need to check and/or modify the following existing fragments:

etc/raddb/radiusd.conf/25modules30smbpasswd:    #  An example configuration for using /etc/samba/smbpasswd.
etc/raddb/radiusd.conf/25modules30smbpasswd:}   passwd smbpasswd \{
etc/raddb/radiusd.conf/25modules30smbpasswd:            filename = /etc/samba/smbpasswd
etc/raddb/radiusd.conf/25modules25mschap:               #  reading from /etc/smbpasswd.
etc/raddb/radiusd.conf/25modules25mschap:               #  If you are using /etc/smbpasswd, see the 'passwd'
etc/raddb/radiusd.conf/25modules25mschap:               #  module for an example of how to use /etc/smbpasswd
etc/raddb/radiusd.conf/65authorization40default:        #  If you are using /etc/smbpasswd, and are also doing
etc/raddb/radiusd.conf/65authorization40default:        #  configure the 'smbpasswd' module, above.
etc/raddb/radiusd.conf/65authorization40default:        ( $ldap{Authentication} || 'disabled' ) eq 'enabled' ? 'ldap' : 'smbpasswd';

/etc/krb5.conf

Create based new template fragments for this configuration file

Configuration Database Parameters

Default key and property values:

Database name	Unique key	Property name	Default value	Possible values	Description
configuration	SMBD		DELETE		Delete this key. Replaced by other keys
	NMBD		DELETE		Delete this key. Replaced by other keys
	SMB		service		Existing SMB key properties changes
		UnixCharSet	DELETE		Delete this property
		workgroup	sme-server	User defined
		ServerString	SME server	User defined
		ServerRole	DC	SA / BD / DC	Stand Alone, Backup Domain or Domain Controller
		OpLocks	enabled	enabled / disabled
		KernelOplocks	enabled	enabled / disabled
		Level2Oplocks	enabled	enabled / disabled
		AllowDNSUpdates	nonsecure
		DNSForwarder	TBA

The DNSForwarder property is a new property that could be defined to forward DNS requests from the Samba DNS to another DNS.

• Others (optional): These parameters are meant to take smb.conf inputs as defined the man pages. Defaults for these parameters are the same as the corresponding defaults in the smb.conf man page. Template fragments feed these parameters into the smb.conf file with minimal syntax checking, as it is assumed those who manually input them know what they are doing.

Database name	Unique key	Property name	Default value	Possible values	Description
configuration	SMB
		NameResolver	TBA		The order in which name resolution will take place by the Samba daemon
		ServerServices	TBA		See the server services discussion detailed under smb.conf section
		SMBPorts	TBA
		SocketOptions	TBA
		WideLinks	TBA
		GuestAccount	TBA
		GuestOK	no	yes / no
		LogonDrive	TBA		Drive letter to be used to the login drive when users login to a domain
		RoamingProfiles	no	yes / no
		LogonPath	TBA
		BindInterfacesOnly	no	yes / no
		CaseSensitive	yes	yes / no
		MaxLogSize	50	User defined	Samba log size in kilobytes. Default set to 50

KRB5 : Create new configuration dbase entry for Kerberos service in Samba

Database name	Unique key	Property name	Default value	Possible values	Description
configuration	Kerberos
		DefaultRealm	uninitialized		This parameter is built into a template fragment, but we will not define it at default. The template fragment will build the default realm by concatenating the SystemName and DomainName reordered elsewhere in the configuration dbase
		DNSLookup	false	true / false
		DNSLookupRealm	false	true / false
		DNSLookupKDC	false	true / false

Services to Modify

Service name	Type	Action	File	Description
smbd	Existing
		Remove	/var/service/smbd
		Remove	/services/smbd
		Remove	/etc/rc.d/init.d/supervise/smb
		Remove	/etc/rc.d/rc7.d/S91smb
		Remove	/etc/rc.d/init.d/smbd
nmbd	Existing
		Remove	/var/service/smbd
		Remove	/services/smbd
		Remove	/etc/rc.d/init.d/smbd
smb	New			I would have liked to have called this "Samba," but that would have meant changing alot of existing code that looks for "smb"
		Create	/var/service/smb	using smbd as a template. Samba 4 should be started with /usr/sbin/samba -D
		Create symlink	/service/smb -> /var/service/smb
		Create symlink	/etc/rc.d/init.d/smb -> /etc/rc.d/init.d/daemontools
		Create symlink	/etc/rc.d/rc7.d/S91smb -> /etc/rc.d/init.d/e-smith-service

DNS

Samba 4 includes an builtin DNS server that is required for proper operation of active directory. This internal DNS server is for AD functions only and does not provide caching DNS functions.

SME Server 9.0 includes a caching DNS (djb dnscache) that listens for DNS requests on the LAN IP address and the localhost. This caching DNS then routes DNS requests for domains defined in the server-manager to tinyDNS and other requests to a resolving dns cache (djb dnscache.forwarder).

One approach for DNS architecture with Samba 4 would have samba 4 primary dns requests to LAN clients, forwarding to the dnscache.forwarder service. The primary dnscache instance and tinydns would then be obsoleted.

LDAP

Need to look at the LDAP authentication backend and mechanism on SME. On the surface, it looks like all of the Samba related LDAP code will be dropped and much of the standard authentication code will need to be converted to Active Directory auth. This task should include looking at openldap-proxy.

Local and Samba Authentication

1. Local Authentication: Samba 4 provides support for local authentication through PAM. This will need to be looked and and sorted out, especially as it relates to the previous LDAP authentication work. Consider replacing with SSSD.
2. Updates to esmith::util perl module: This perl module contains function for setting and modifying user passwords. We will need to redesign these functions to integrate with AD. Specific changes:
   • setSambaPassword function: This function needs to be completely re-written to set the Active directory password instead of the old samba password in smbpasswd
   • cancelSambaPassword function: Needs to be re-written for active directory instead of old smbpasswd file
   • local password functions: We need to look at these once we decide how we are going to handle local authentication on SME with Active directory.
   • ldapPassword function: Need to look at this and likely deprecate it, as we will likely set active directory passwords differently.

Home directories and Homes Share

Samba 4 changes the way Samba used to handle home directories.

1. Samba 4 does not use the [homes] share with the [home] share.
2. With respect to the [home] share, Samba 4 currently does not expand the %S variable in the smb.conf file due to a bug with Samba 4. Therefore, this will not work for us to share home directories: /home/e-smith/files/users/%S/home. Instead, we may be able to use this: '/home/%WORKGROUP%/%ACCOUNTNAME% and them link (symlink/hardlink) this to our current home directory structure so that we can share the home dirs via samba.
3. We need to look at the "template homedir" configuration parameter in smb.conf and/or SSSD, as this may allow us to create home directories easier on a new user create event.
4. The Samba active directory includes two attributes for home directories: homeDirectory (used by windows) and unixHomeDirectory(used by *nix). The current unixHomeDirectory attribute doesn't seem to be fully utilized by Samba.

1. Good thread on the topic: https://lists.samba.org/archive/samba/2014-January/178151.html

Other Development Tasks to Research and Complete

1. Domain Server-Manager Panel: A new Domain server-manager panel should be developed and the workgroup panel removed. Further discussion will need to take place to determine what needs to go into this new panel. This panel will likely be fairly simple, as much of the configuration parameters associated Samba Active directory will be incorporated into template fragments and database entries.
2. User/Group Server-Manager Panels: These panels will need to be looked at as they relate to template fragments, adjusting services, and updating database entries associated with Samba.
3. Ibay Server-Manager Panel: This panel will need to be looked at as it relates to template fragments, adjusting services, and updating database entries associated with Samba.
4. Events/Actions': Existing events and actions related to samba will need to be reviewed and updated accordingly. A new event/action may need to be developed to provision a new Active Directory Domain using the Samba-Tool utility.
5. e-smith-samba: This package needs to be updated with development pieces detailed in this wiki page, for wider testing and development assistance.

Status

#	Task	Status
1.	Sernet Samba 4 package rebuild	DONE
2.	Create daemontools service for Samba 4	DONE
3.	Re-Write smb.conf template fragments	DONE
4.	Create Kerberos template fragments	DONE
5.	Add/Modify SMB database entries	DONE
6.	Create krb5 configuration dbase key	DONE
7.	Re-configure init.d start-up/shutdown scripts	DONE
8.	Configure Samba DNS Service	DONE
9.	Configure DNS Cache Resolver	DONE
10.	Create Active Directory Provision/Re-Provision SME Event	DONE
11.	Add Active Directory Provisioning to Bootstrap-Console	DONE
12.	Reconfigure SME User Authentication for Active Directory	UNDERWAY

References

1. http://dev.nethserver.org/projects/nethserver/wiki/Samba4 (Thanks Filippo!)
2. https://lists.samba.org/archive/samba/2014-April/180336.html
3. https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO
4. http://www.alexwyn.com/computer-tips/centos-samba4-active-directory-domain-controller

Bugzilla references

bugzilla:8075 Adding Samba 4
bugzilla:8638 Modify e-smith-dnscache for Samba 4 support
bugzilla:8660 User account authentication with Active Directory and AccountsDB
bugzilla:8663 Proftpd and active directory authentication (Samba 4)
bugzilla:8665 esmith::AD perl module for interacting with Active Directory
bugzilla:8667 Get rid of PPTP when we upgrade to Samba 4
bugzilla:8670 Qmail updates for Samba 4
bugzilla:8674 Remove smbpasswd and WINS pieces for Samba 4
bugzilla:8675 e-smith-LDAP + Samba 4
bugzilla:8703 Samba 4: Home directory

Active Directory Schema

Following is a direct dump of the active directory from a freshly provisioned SME Server domain. The DNS/Kerberos domain is domain.com, the hostname is virgin, and the windows domain is sme-server. The ipaddress for this test machine is 192.168.0.67. These data is quite long, but I found it very useful; as it is extremely difficult to find these attributes in any documentation about Samba 4 and ADDC: