Changes

* It is possible to use the command line to transfer a backup file via ssh (or USB) to the new server & then to run the restore. Standard & non standard backup concepts & procedures are outlined in the Backup server config Howto, http://wiki.contribs.org/Backup_server_config If using any non standard method, then the integrity of your SME server data cannot be guaranteed.

* It is possible to use the command line to transfer a backup file via ssh (or USB) to the new server & then to run the restore. Standard & non standard backup concepts & procedures are outlined in the Backup server config Howto, http://wiki.contribs.org/Backup_server_config If using any non standard method, then the integrity of your SME server data cannot be guaranteed.

* To do a standard backup & restore using CLI, on the old server log in as admin & perform the Console Backup to USB drive (to a locally connected USB). Alternatively using suitable commands, a smeserver.tgz backup file could be created & saved to / folder, refer Howto.

* To do a standard backup & restore using CLI, on the old server log in as admin & perform the Console Backup to USB drive (to a locally connected USB). Alternatively using suitable commands, a smeserver.tgz backup file could be created & saved to / folder, refer Howto.

* Install the SME 9.x OS from CD on the new hardware (on new server).

* Install the Koozali SME 10.x OS from CD on the new hardware (on new server).

* Answer No when asked if you want to restore from USB during the first boot.

* Answer No when asked if you want to restore from USB during the first boot.

* If you created or have the backup file on the old server, transfer the smeserver.tgz backup file via ssh from your old server to your new server. Both servers must be connected & remote access enabled

* If you created or have the backup file on the old server, transfer the smeserver.tgz backup file via ssh from your old server to your new server. Both servers must be connected & remote access enabled

* After restore, the Configuration of the new server should be identical to the old server.

* After restore, the Configuration of the new server should be identical to the old server.

* Note with two servers connected during ssh copying operations, basic networking configuration of the new unrestored SME9 server will need to be temporarily different to the old server to avoid clashes.

* Note with two servers connected during ssh copying operations, basic networking configuration of the new unrestored SME9 server will need to be temporarily different to the old server to avoid clashes.

======<big>Migrate using the Lazy Admin Tools</big>======

======<big>Migrate using the Lazy Admin Tools</big>======