Changes

From SME Server
Jump to navigationJump to search

SME Server:Documentation:Administration Manual:Chapter4 (view source)

Revision as of 21:19, 16 April 2021

No change in size ,  21:19, 16 April 2021
→‎4.3. Hard Drive Configuration
Line 98: Line 98:  
====4.3. Hard Drive Configuration====
 
====4.3. Hard Drive Configuration====
   −
For default RAID configuration options as chosen by the installer, please see here: [[https://wiki.koozali.org/Raid#Default_RAID_Rationale|Defulat RAID settings]]
+
For default RAID configuration options as chosen by the installer, please see here: [[https://wiki.koozali.org/Raid#Default_RAID_Rationale|Default RAID settings]]
   −
Do please note that the installer expects drives to be empty. Previously used drives should be wiped before being used for an install: this is sometimes tricky depending on which operating system was previously installed. Please see [[https://wiki.koozali.org/Raid#Reusing_Hard_Drives|here]].
+
Do please note that the installer expects drives to be empty. Previously used drives should be wiped before being used for an install: this is sometimes tricky depending on which operating system was previously installed. Please see [[https://wiki.koozali.org/Raid#Reusing_Hard_Drives|Here]].
    
====4.4. Supported Ethernet or SCSI Adapters, or Tape Drives====
 
====4.4. Supported Ethernet or SCSI Adapters, or Tape Drives====
Retrieved from "https://wiki.koozali.org/Special:MobileDiff/39735"

Navigation menu