Changes

This screen in the server manager allows you to configure your server to connect regularly to a time server and synchronize the clock on the server with the time provided by the time server. To do this, simply check the box for "Enable NTP Service", add the domain name or IP address of the time server in the space provided and click "Save NTP Settings". Using a time server is optional but doing so can greatly increase the accuracy of your system.

This screen in the server manager allows you to configure your server to connect regularly to a time server and synchronize the clock on the server with the time provided by the time server. To do this, simply check the box for "Enable NTP Service", add the domain name or IP address of the time server in the space provided and click "Save NTP Settings". Using a time server is optional but doing so can greatly increase the accuracy of your system.

For more information about using a network time server, visit http://www.ntp.org/. You can also find a list of publicly available time servers at http://www.eecis.udel.edu/~mills/ntp/servers.htm. You should always use a secondary time server (also called a stratum 2 server) to lighten the load on the primary time servers.

For more information about using or becoming a network time server, visit http://www.pool.ntp.org

{{Tip box|In order to make sure the network time server is set to your timezone, you should go through this screen once and manually set the time to be correct and with the correct timezone. After doing that, go back to this panel and set the server to use a network time server.}}

{{Tip box|In order to make sure the network time server is set to your timezone, you should go through this screen once and manually set the time to be correct and with the correct timezone. After doing that, go back to this panel and set the server to use a network time server.}}