PHPki/fr

(ne semble plus nécessaire)

Vérifié sur :
SME Server 7.4 - RequestedDeletion

yum --enablerepo=smecontribs install smeserver-phpki

expand-template /etc/httpd/conf/httpd.conf
expand-template /etc/httpd/pki-conf/httpd.conf
sv t /service/httpd-e-smith
sv u /service/httpd-pki

signal-event post-upgrade; signal-event reboot

yum --enablerepo=smecontribs,epel install smeserver-phpki

expand-template /etc/httpd/conf/httpd.conf
expand-template /etc/httpd/pki-conf/httpd.conf
sv t /service/httpd-e-smith
sv u /service/httpd-pki

signal-event post-upgrade; signal-event reboot

#!/bin/bash

# Read Openvpn-Bridge DB
ORGNAME=$(/sbin/e-smith/db openvpn-bridge getprop default_config organizationName)
COUNTRY=$(/sbin/e-smith/db openvpn-bridge getprop default_config countryCode)
STATE=$(/sbin/e-smith/db openvpn-bridge getprop default_config countryName)
LOC=$(/sbin/e-smith/db openvpn-bridge getprop default_config localityName)
DEP=$(/sbin/e-smith/db openvpn-bridge getprop default_config sectionName)
KEYSIZE=$(/sbin/e-smith/db openvpn-bridge getprop default_config keySize)
EMAIL=$(/sbin/e-smith/db openvpn-bridge getprop default_config mailAddress)


OPENSSL=/usr/bin/openssl
OLDDIR=/etc/openvpn/easy-rsa/keys/bridge/
NEWDIR=/opt/phpki/phpki-store/CA/


# Store the actual time in $TIME
TIME=$(date +%d%m%Y%H%M%S)


# Create needed directories
prepare_dir(){
        mkdir -p $NEWDIR/{certs,newcerts,requests,pfx,private}
}


# Migrate the certificates to phpki store
migrate_certs(){
        cd $OLDDIR

        # Copy the old index.txt and serial
        cat $OLDDIR/index.txt > $NEWDIR/index.txt
        cat serial > $NEWDIR/serial

        # Copy the cacert related files
        cat ca.crt > $NEWDIR/certs/cacert.pem
        cat ca.key > $NEWDIR/private/cakey.pem

        # Now, for each file ending with .crt
        for CERT in $(ls ./*.crt); do
                CERT=$(basename $CERT .crt)

                ISININDEX=$(grep -c "/CN=$CERT/" $NEWDIR/index.txt)

                # If the current cert isn't referenced in the index,
                # or the corresponding key or csr file dosn't exists, then skip it
                # This can happen in some situation where the serial has been corrupted

                if [ $ISININDEX -gt 0 ]&&[ -s $CERT.key ]&&[ -s $CERT.csr ]; then
                        # Retrieve the serial number as reported by  openssl
                        SERIAL=$(openssl x509 -noout -serial -in $CERT.crt | cut -d"=" -f 2)

                        # Create the pem only cert in the new dir
                        $OPENSSL x509 -in $CERT.crt -inform PEM -outform PEM -out $NEWDIR/newcerts/$SERIAL.pem

                        # Create the der formated cert
                        $OPENSSL x509 -in $CERT.crt -inform PEM -outform DER -out $NEWDIR/certs/$SERIAL.der

                        # And the pkcs12 bundle (cert+key+ca)
                        $OPENSSL pkcs12 -export -in $CERT.crt -inkey $CERT.key -certfile ca.crt -caname $ORGNAME -passout pass: -out $NEWDIR/pfx/$SERIAL.pfx

                        # Copy the private key
                        cat $CERT.key > $NEWDIR/private/$SERIAL-key.pem 

                        # And the cert request
                        cat $CERT.csr > $NEWDIR/requests/$SERIAL-req.pem
                fi
        done
}

perms(){
        # Restrict access
        chown -R phpki:phpki $NEWDIR
        chmod -R o-rwx $NEWDIR
}

phpki_conf(){
        # Retrieve the common name of our CA with openssl command
        CACN=$($OPENSSL x509 -subject -noout -in $OLDDIR/ca.crt | cut -d'=' -f 8 | cut -d'/' -f 1)


        if [ -e /opt/phpki/phpki-store/config/config.php ]; then
                # Move the actual phpki configuration file               
                mv /opt/phpki/phpki-store/config/config.php /opt/phpki/phpki-store/config/config.php.$TIME

                # And use sed to configure it properly
                sed -e "s/config\['organization'\].*/config\['organization'\] = '$ORGNAME';/" \
                        -e "s/config\['unit'\].*/config\['unit'\] = '$DEP';/" \
                        -e "s/config\['contact'\].*/config\['contact'\] = '$EMAIL';/" \
                        -e "s/config\['locality'\].*/config\['locality'\] = '$LOC';/" \
                        -e "s/config\['province'\].*/config\['province'\] = '$STATE';/" \
                        -e "s/config\['country'\].*/config\['country'\] = '$COUNTRY';/" \
                        -e "s/config\['common_name'\].*/config\['common_name'\] = '$CACN';/" \
                        -e "s/config\['ca_pwd'\].*/config\['ca_pwd'\] = '';/" \
                        -e "s/config\['keysize'\].*/config\['keysize'\] = '$KEYSIZE';/" \
                        /opt/phpki/phpki-store/config/config.php.$TIME \
                        > /opt/phpki/phpki-store/config/config.php
        fi
}

migrate_var(){
        # Here, we just migrate dhparam and ta to phpki store
        if [ -e $OLDDIR/dh.pem ]; then
                cat $OLDDIR/dh.pem > $NEWDIR/private/dhparam1024.pem
        fi
        if [ -e $OLDDIR/ta.key ]; then
                cat $OLDDIR/ta.key > $NEWDIR/private/takey.pem
        fi
}


prepare_dir
migrate_certs
phpki_conf
migrate_var
perms

yum remove smeserver-phpki phpki
expand-template /etc/httpd/conf/httpd.conf
sv t /service/httpd-e-smith

cd /opt/phpki
tar cvzf ~/phpki-backup.tar.gz ./

cd /opt/phpki/html/
rm -f index.php 
rm -f setup.php
ln -s main.php index.php
cat config.php.rpmsave > config.php
cd ca
rm -f index.php
ln -s main.php index.php

PHPki/fr

Contents

Mainteneur

Version

Description

Pré-requis

Installation

SME Server 7, SME Server 8, SME Server 9

Configurer le nouveau PKI

Migration des certificats pour l'installation des versions précédentes de la contribs OpenVPN-Bridge

Désintallation

Réinstallation

Bugs

Navigation menu

Search

	Attention :
	cette version de PHPki est une version légèrement modifiée, de sorte qu'elle puisse être utilisée avec les certificats générés avec la version précédente de SME Server OpenVPN Bridge, ainsi que quelques autres de modifications mineures.

	Note:
	Si vous installez juste la contrib OpenVPN_Bridge et avez installé PHPki comme recommandé sur la page Wiki, ou vous voulez juste utiliser PHPki sans la contrib OpenVPN_Bridge, alors vous avez terminé, et vous n'avez donc pas besoin de migrer les certificats.

	Attention :
	bien sûr, prenez le temps de le lire avant de l'exécuter en root.

	Note:
	Comme beaucoup d'autres RPMs, supprimer PHPki ne va pas le faire disparaître totalement de votre serveur. Surtout les certificats, ils seront conservés et certains fichiers PHP aussi.