624
edits
Changes
Jump to navigation
Jump to search
Line 4:
Line 4: + + + + + + + + − + − + + − + + + + + + + + + + − http://www.linuxmanpages.com/man8/smartd.8.php <br>+ − http://www.captain.at/howto-linux-smartmontools-smartctl.php
updated
To enable
To enable
config setprop smartd status enabled
config setprop smartd status enabled
And start, (smartd will start automatically on a reboot if enabled)
/etc/rc.d/init.d/smartd start
Errors are emailed admin if and when they are found.
If you receive an email indicating problems, then you should manually run tests & view the report & take appropriate action (eg replace drive if necessary).
To manually check disks
To manually check disks
Generate report
Generate report
smartctl -t short /dev/hdc (1 minute)
smartctl -t short /dev/sda (1 minute)
smartctl -t long /dev/hdc (1 hour)
smartctl -t long /dev/sda (1 hour)
smartctl -t conveyance /dev/sda (5 minutes)
View report
View report
smartctl -a /dev/hdc
smartctl -a /dev/sda
For additional information see:
http://linuxcommand.org/man_pages/smartd8.html
http://linux.die.net/man/8/smartctl
Error code description: http://en.wikipedia.org/wiki/S.M.A.R.T.
<noinclude>[[Category:Howto]][[Category:Administration:Monitoring]]</noinclude>