689
edits
Changes
From SME Server
Jump to navigationJump to searchIAXModem with Sail and HylaFax (view source)
Revision as of 22:04, 15 January 2010
, 22:04, 15 January 2010no edit summary
In ''Global Settings''
In ''Global Settings''
*Make sure that 'Late Termination' is set to No.
*Make sure that 'Late Termination' is set to No.
*Make sure that the 'Autosense FAX Extension' is set to a number you want to use for the Fax. You will need this number later
*Make sure that the 'Autosense FAX Extension' is set to a number you want to use for the Fax. You will need this number later.
*The 'Fax Delay' setting defaults to 2 seconds. You may need to adjust this later to make sure faxes get detected before asterisk attempts to terminate somewhere other than the FAX.
*The 'Fax Delay' setting defaults to 2 seconds. You may need to adjust this later to make sure faxes get detected before asterisk attempts to terminate somewhere other than the FAX.
For each of the Trunks under ''Trunklines'' that you want to be able to detect incoming Faxes on, make sure that the 'Fax' detection tick box is ticked
For each of the Trunks under ''Trunklines'' that you want to be able to detect incoming Faxes on
*Make sure that the 'Fax' detection tick box is ticked
===Fax Extension===
===Fax Extension===
Create a new Extension with the same number as set in the 'Autosense FAX Extension' as above - or vice versa. The 'Device' should be IAXModem.
{{Note box|We will assume an extension number of 2000, a password (secret) of asterisk and a Display Name of FaxModem}}
Once created check the stanza generally conforms to the following and change as necessary:
[2000]
type=friend
username=FaxModem
secret=asterisk
host=dynamic
qualify=3000
context=internal
callerid="Faxmodem" <2000>
disallow=all
allow=slin
==IAXModem==
{{Note|Sail installs /etc/rc.d/rc7.d/S93iaxmodem but does not install /etc/rc.d/init.d/iaxmodem}}
----
----
