Changes

From SME Server
Jump to navigationJump to search

IAXModem with Sail and HylaFax (view source)

Revision as of 21:44, 15 January 2010

638 bytes added ,  21:44, 15 January 2010
no edit summary
Line 1: Line 1: −
   
{{Incomplete}}
 
{{Incomplete}}
 
==Introduction==
 
==Introduction==
Line 9: Line 8:     
{{Note box|This has only been tested with Asterisk 1.4.25.1-78, Sail 2.4.1-2 and the Hylafax Contrib from Dungog smeserver-hylafax-0.9.6 with hylafax-4.4.4-1
 
{{Note box|This has only been tested with Asterisk 1.4.25.1-78, Sail 2.4.1-2 and the Hylafax Contrib from Dungog smeserver-hylafax-0.9.6 with hylafax-4.4.4-1
−
No other asterisk implementations have used}}
+
No other asterisk implementations have been used or tested.
 +
It is assumed that you have a working Sail/asterisk installation}}
    
==Sail and Asterisk Setup==
 
==Sail and Asterisk Setup==
 +
===General===
 +
In Global Settings make sure that 'Late Termination' is set to No.
 +
Make sure that the 'Autosense FAX Extension' is set to a number you want to use for the Fax. You will need this number later
 +
The 'Fax Delay' setting defaults to 2 seconds. You may need to adjust this later to make sure faxes get detected before asterisk attempts to terminate somewhere other than the FAX.
 +
For each of the Trunks under Trunklines that you want to be able to detect incoming Faxes on, make sure that the 'Fax' detection tick box is ticked
 +
 +
===Fax Extension===
       
----
 
----
Retrieved from "https://wiki.koozali.org/Special:MobileDiff/13980"

Navigation menu