Changes

FreePBX require that you configure your hardware card by hands before it can use it.

FreePBX require that you configure your hardware card by hands before it can use it.

This example is with a TDM400 card from Digium. It should be about the same for other models.

This example is with a TDM400P card from Digium. It should be about the same for other models.

* Insert the card

* Insert the card

Now check your server can see the card with lspci

Now check your server can see the card with lspci

  [root@sme ~]# lscpi

  [root@sme ~]# lscpi

With the TDM400, you should see something like:

With the TDM400P, you should see something like:

  00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface

  00:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface