Drupal

From SME Server
Jump to navigation Jump to search

Installing Drupal 7 on SME Server 8

This guide shows you how to correctly install Drupal ( http://www.drupal.org ) into your Primary ibay.

Setting up PHP to work correctly for Drupal

   db accounts setprop Primary PHPBaseDir /home/e-smith/files/ibays/Primary:/tmp
   signal-event ibay-modify Primary
   db configuration setprop php MemoryLimit 128M
   db configuration setprop php PostMaxSize 112M
   db configuration setprop php UploadMaxFilesize 96M
   expand-template /etc/php.ini 
   sv t httpd-e-smith

Setting up the overrides for Apache

   db accounts setprop Primary AllowOverride all
   db accounts setprop Primary FollowSymLinks enabled
   db accounts setprop Primary Indexes disabled
   signal-event ibay-modify Primary

Setting up ftp

In order to be able to ftp new themes and modules to your drupal installation, you need to go to the server-manager panel in smeserver and:

  • Create a user from the user panel and reset their password
  • Enable ftp from local networks
  • Give the user you just created the correct access permissions

For example, say you created a user called fred, then in order for fred to be able to ftp the required files via the drupal interface, then you give them permission to do so like this:

   cd /home/e-smith/files/ibays/Primary/html/
   chown -R fred:www .
   find . -type d -exec chmod u=rwx,g=rx,o= {} \;
   find . -type f -exec chmod u=rw,g=r,o= {} \;

Where fred is the user account you will use in Drupal to ftp the files (for example installing a new theme) and www is the account that smesever runs the web server under.

Lastly you have to modify the /etc/proftpd.conf file and comment out the "DefaultRoot" line ( I used the nano editor for this ):

   cp /etc/e-smith/templates/etc/proftpd.conf/05DefaultRoot /etc/e-smith/templates-custom/etc/proftpd.conf/
   nano  /etc/e-smith/templates-custom/etc/proftpd.conf/05DefaultRoot

Comment out the DefaultRoot like:

   #DefaultRoot            /home/e-smith/files

Now save the file by going pressing the control and o keys together, then exit nano by pressing the control and the x keys together.

Then you need to expand the template:

   expand-template /etc/proftpd.conf

To confim this:

   config show ftp

Should return:

   ftp=service
   LoginAccess=private
   TCPPort=21
   access=private
   status=enabled

Finally, you are ready to follow the install instructions for Drupal

Now SME Server is all set up ready for you to follow the Drupal installation guide at: http://drupal.org/documentation/install


This has been tested on 8Beta6 and the 8Beta7 release.


As a footnote, I would recommend only enabling ftp via the server-manager panel just when you need it so that it is not turned on all the time!