Docker

From SME Server
Jump to navigation Jump to search
Time.png Outdated:
The information on this page maybe no longer relevant.


Warning.png Work in Progress:
This page is a Work in Progress. The contents off this page may be in flux, please have a look at this page history the to see list of changes.


Placeholder for anything to do with Docker (https://docker.com)

Important.png Note:
All info is based on SME Server 9 only.

Your host server must have internet access.

All testing below has been done on a virtual SME9 under Virtualbox. Yes, Docker also run on VM's :-)

By NO means this is an official thing or even applicable at all. Tinkering phase only here!


You can discuss all things related to this page on the forums here

There is a separate page that addresses the design of a Docker contrib here

There is also a page to discuss on how to create a Docker image of SME here

About

 

Docker is an open-source project that automates the deployment of applications inside software containers, providing that way an additional layer of abstraction and automatization of operating system–level virtualization on Linux. Docker uses resource isolation features of the Linux kernel such as cgroups and kernel namespaces to allow independent "containers" to run within a single Linux instance, avoiding the overhead of starting virtual machines.


Why Docker on SME Server?

Docker containers hold one or more applications (and all it's dependecies) and can be started and stopped at will. The containers, when activated, use the Linux kernel namespaces and are operating isolated from the rest of your server, except for storage/mount points and networking, depending on the configuration of the container. Some applications require special PHP versions or other modifications to your server settings that are not desirable and may effect yum updates and upgrades. Docker containers is a way to have such an application packed with all it's dependencies and run it isolated. You can have multiple containers running, depending on your server hardware capacity.

Examples:

  • ownCloud running in a container with a higher version of PHP then SME Server provides
  • A postgres application running in a container without having to install Postgres on SME Server
  • Service on demand, you can start/start (even scripted) a container when you need the service within the container
  • Move containers from one SME Server to another (Back-up or production) without installing the application itself
  • Time based service e.g. cron jobs. Only have an application running when you need it.
  • Keep SME Server's stock stability, security and flexibility, yet run exotic applications


Considerations

  • Storage of image library (local/NAS)
  • Storage of Docker application data (local/NAS)
  • Networking e.g. bridged with host, new bridge with host or port mapping
  • Stand alone all-in-on docker or linked containers
  • Security
  • Only use TRUSTED repo's with images. Who build the image, what's in it?
  • Naming convention of images to identify source(person or repo), SME version, application and version. e.g.:
owncloud-7.0.1-smeserver-9.0-john
wordpress-3.9.1-smeserver-8.1-mary
ehour-1.4.1-smeserver-9.0-richard
sharedfolders-2.1.1-smeserver-9.0-fws
frontaccounting-3.2.1-smeserver-8.1-contribsorg

Why the SME Server version in the naming convention if it's all inside the container? Well, it could well be that the application inside the container will use some of SME Server specifics such as the db, templates or perl interaction. In that case we need to make sure that we know for which SME Server the image was build.


  • Verification (checksum) of available images
  • Setting up trusted docker repo's
  • disable docker repo's enabled by default at installation and come up with a command that enables them a la Yum


Challenges

  • How to interact with localhost PAM or LDAP from within a container?

I think that you can access localhost services by adding

--net="host" to docker run

This means any services on the docker container are equally valid 'localhost' services accessible from the server itself so you need to ensure the server is properly firewalled.

  • Many more...


Installation

Docker requires some RPM's that are not available in the default upstream repo's. So we need to enable the epel repo first. See epel

Then we can install Docker and it's dependencies:

yum install docker-io --enablerepo=epel


Make the Docker service start at boot time:

ln -s /etc/rc.d/init.d/e-smith-service /etc/rc7.d/S95docker
chkconfig docker on
config set docker service
config setprop docker status enabled


Configuration

Docker comes with a configuration file located at:

/etc/sysconfig/docker

In this file you can set default parameters which are applicable to all containers run by Docker. By default it holds no arguments. All arguments can also be set manually when starting a container, in which case each individual container can have it's specific parameters. To see a list all available arguments that can be used in the Docker configuration file enter:

docker -h


SME Server specifics

By default Docker will store all images, containers and other data in:

/var/lib/docker

For SME Server this is not ideal for we would like to incorporate all Docker data into the pre-defined backup procedure(s) that come with SME Server. The preferred location for Docker data would be:

/home/e-smith/files/docker

We want this to be the default location for all Docker data on SME Server, so we add the '-g' argument and the desired path to the storage location to the docker configuration file like this:

# /etc/sysconfig/docker
#
# Other arguments to pass to the docker daemon process
# These will be parsed by the sysv initscript and appended
# to the arguments list passed to docker -d

other_args="-g /home/e-smith/files/docker -H unix:///var/run/docker.sock"


Since the Docker service will always check this configuration file upon (re)start, it will automatically pick up the arguments you have provided and act accordingly. That also implies that you can have multiple (but not simultaneously) storage locations if you omit the configuration file and add arguments manually on the command line.

The second argument '-H unix:///var/run/docker.sock' will tell Docker where to find it's socket to bind.


It is important that you adjust the config file before you start using docker otherwise it will create it's default storage location in /var/lib/docker.

You can still change the storage location in a later stage by copying all data to the new location you've defined with the -g argument.


Once the above changes have been made, the Docker service can be started and Docker will create it's new storage layout in /home/e-smith/files/docker.

service docker start

You can check if the docker deamon is running:

service docker status

and if it created the storage layout correctly:

ls -l /home/e-smith/files/docker/

Using a Docker image

By default, there are pre-build images available from the official Docker Hub. In our examples we will use the pre-build centos6 image.

To get a list of all available Centos images you can use:

docker search centos

You will be flooded with available images from the Docker hub. This is because everyone can have a free account on Docker hub and create one repository for him/herself. We limit our testing to the official Centos repo. With all the other images, you are on your own and usage is at your own risk.


Downloading a docker image

To download the centos6 image to your local server, issue the following command as root:

docker pull centos:centos6

where the syntax is 'centos' as the main repository and 'centos6' the specific version. Would you issue only 'docker pull centos', then all centos versions will be downloaded. So be specific.

Once the image has been downloaded, you can check your local images by issuing:

docker images

The listing included the Image ID and Name. These are important to run additional commands when the container is running.


Running a docker container

Now that we have downloaded the centos6 image it's time to give it a spin. To start the cento6 container we can issue the follwoing command:

docker run -t -i --net="host" centos:centos6 bash

This will tell docker to run the centos6 container interactiveley from the local centos repo, use the host network interface and start bash. After a few seconds you will be presented with the bash prompt inside the centos6 container:

bash-4.1#

and to check if we are really inside the centos6 container we can display the release version:

cat /etc/redhat-release

which will result in:

CentOS release 6.5 (Final)

From here you can use the normal commands like yum etc.

To exit the container you give the normal 'exit' command, which will stop the centos6 container and bring you back to the prompt of your local server.

To run a container in the background, you need to issue to docker run command with the -d flag instead of the -i flag


Copy docker images

Docker images are stored on your local server. If you want to run the image on another machine you first have to take the image out of your local image repository and save the image in a transferable format. For this the save the image in .tar format. To get a listing of all available images on your local server:

docker images

will result in (example):

[root@sme9 ~]# docker images
REPOSITORY                 TAG                 IMAGE ID            CREATED             VIRTUAL SIZE
sme9                       6.5                 55db4355a2de        46 minutes ago      854.7 MB
leszekk/centos_minimalcd   6.5                 bc56fa8f1204        8 months ago        452.6 MB

To create a copy of our sme9 image and save it as 'copyofsme9 you need to enter the following command:

docker save sme9:6.5 > /tmp/copyofsme9.tar

which will result in a copyofsme9.tar file in your /tmp directory of your local server. You can now copy/move this file to another server or simply archive it for later usage.

To use the copyofsme9.tar file on another server and use it on that server with Docker, we can load it into the repository of the new server:

docker load -i < /downloads/copyofsme9.tar

After Docker has loaded the file, you can check it's availability by executing: docker imagesand you can use it just like any other image on your new server. You can use the save and load commands to clean up your local repository and share copies of your image.

Docker networking

some thoughts to share on docker networking

  • Network port mapping

http://docs.docker.com/userguide/dockerlinks/

  • Network Configuration

http://docs.docker.com/articles/networking/

Note: Could we use FWS webapps to create an apache sub domain where the docker web application can be reached and 'masquerade' an unusual http port? e.g.

owncloud.mydomain.com vs mydomain.com:8000

Using

mydomain.com/owncloud

would require ibay checking


Docker Name resolution

Normally you could add the DNS directly in the file /etc/sysconfig/docker, if you don't do that, your docker container could ping an IP, but never do the domain name translation. This is the dns of opendns, but you could change them.

# cat /etc/sysconfig/docker
# /etc/sysconfig/docker
#
# Other arguments to pass to the docker daemon process
# These will be parsed by the sysv initscript and appended
# to the arguments list passed to docker -d

other_args="--dns 208.67.220.220 --dns 208.67.220.222"

or you could add directly from the command line

docker run -i -t -dns 208.67.220.220 -dns 208.67.220.222  sme9_real:6.5 /bin/bash

Building your own images

  • Notes

Manual, or.. https://github.com/docker/fig

'Proposal test image:'

An application that requires Java, PHP, Apache, MySQL and LDAP. The localhost MySQL and localhost LDAP should be used by the application. The application should be publicly available either on a subdomain or specific port on the FQDN. The application should only be available between 08:00AM untill 19:00PM. All application data should be incorporated by the default SME Sever backup mechanisms, including the image itself.

  • Building the image based on centos6
  • Configure networking, bridges and ports
  • Start/restart and stop syntax of the application
  • Configure cron


Setting up a (Private) Docker repository

TBA


Docker notes

Loose notes:

docker=service
access=public
status=enabled


Shipyard web GUI

There is a separate page on how to install Shipyard, the Docker web GUI here


Related articles of interest


Things to do