859
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − Your host server must have internet access. − All testing below has been done on a virtual SME9 under Virtualbox. Yes, Docker also run on VM's :-)+ + − By NO means this is an official thing or even applicable at all. Tinkering phase only here!}}+ − + − + Line 19:
Line 19: − + Line 43:
Line 43: + Line 51:
Line 52: − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − Then we can install Docker and it's dependencies:+ − yum install docker-io --enablerepo=epel + + + + − Make the Docker service start at boot time:+ − ln -s /etc/rc.d/init.d/e-smith-service /etc/rc7.d/S95docker − chkconfig docker on − config set docker service − config setprop docker status enabled + − ===Configuration===+ − Docker comes with a configuration file located at: − /etc/sysconfig/docker − In this file you can set default parameters which are applicable to all containers run by Docker. By default it holds no arguments. All arguments can also be set manually when starting a container, in which case each individual container can have it's specific parameters. To see a list all available arguments that can be used in the Docker configuration file enter: − Docker -h + − ====SME Server specifics====+ Line 84:
Line 216: − We want this to be the default location for all Docker data on SME Server, so we add the '-g' argument and the desired path to the storage location to the docker configuration file like this:+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + − # /etc/sysconfig/docker − # − # Other arguments to pass to the docker daemon process − # These will be parsed by the sysv initscript and appended − # to the arguments list passed to docker -d − − other_args="-g /home/e-smith/files/docker -H unix:///var/run/docker.sock" + + + + − Since the Docker service will always check this configuration file upon (re)start, it will automatically pick up the arguments you have provided and act accordingly. That also implies that you can have multiple (but ''not'' simultaneously) storage locations if you omit the configuration file and add arguments manually on the command line. − The second argument '-H unix:///var/run/docker.sock' will tell Docker where to find it's socket to bind.+ + + + − It is ''important'' that you adjust the config file ''before'' you start using docker otherwise it will create it's default storage location in /var/lib/docker.+ − You can still change the storage location in a later stage by copying all data to the new location you've defined with the -g argument. − Once the above changes have been made, the Docker service can be started and Docker will create it's new storage layout in /home/e-smith/files/docker.+ − service docker start+ + − You can check if the docker deamon is running:+ − service docker status+ − + − ls -l /home/e-smith/files/docker/+ + + + − ==Using a Docker image==+ − − − + − + − + + − + − + − + − + Line 149:
Line 310: + + + + + − + + Line 181:
Line 348: − Normally you could add the DNS directly in the file /etc/sysconfig/docker, if you don't do that, your docker container could ping an IP, but never do the domain name translation. This is the dns of opendns, but you could change them.+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − # cat /etc/sysconfig/docker+ − # /etc/sysconfig/docker+ − + − # Other arguments to pass to the docker daemon process + − # These will be parsed by the sysv initscript and appended+ − # to the arguments list passed to docker -d+ − + − other_args="--dns 208.67.220.220 --dns 208.67.220.222" + + + + + + + + + + + + + + + + + − or you could add directly from the command line+ − docker run -i -t -dns 208.67.220.220 -dns 208.67.220.222 sme9_real:6.5 /bin/bash − ==Building your own images==+ − * Notes − Manual, or.. − https://github.com/docker/fig − ==='Proposal test image:'===+ − An application that requires Java, PHP, Apache, MySQL and LDAP. The localhost MySQL and localhost LDAP should be used by the application. The application should be publicly available either on a subdomain or specific port on the FQDN. The application should only be available between 08:00AM untill 19:00PM. − All application data should be incorporated by the default SME Sever backup mechanisms, including the image itself. − * Building the image based on centos6+ − * Configure networking, bridges and ports − * Start/restart and stop syntax of the application − * Configure cron + − + − TBA+ − * https://blog.codecentric.de/en/2014/02/docker-registry-run-private-docker-image-repository/+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + − Loose notes: − docker=service − access=public − status=enabled + + − ==Shipyard web GUI== − There is a separate page on how to install Shipyard, the Docker web GUI [http://wiki.contribs.org/Shipyard here] + − ==Related articles of interest== − * [http://jpetazzo.github.io/2014/01/29/docker-device-mapper-resize/ Container storage and (re)size] + − ==Things to do==+ − * Get the [https://github.com/shipyard/shipyard shipyard GUI] going − * A LOT more ;-) + − + − + + +
→config entries
{{WIP box}}
{{WIP box}}
Placeholder for anything to do with Docker (https://docker.com)
Placeholder for anything to do with Docker (https://docker.com)
{{Note box| All info is based on SME Server 9 only.
{{Note box| The contrib has been built from the original notes and I use it to permanently run Rocketchat }}
=== Version ===
{{ #smeversion: smeserver-docker }}
'''You can discuss all things related to this page on the forums [http://forums.contribs.org/index.php/topic,51181.0.html here]'''
'''You can discuss all things related to this page on the forums [http://forums.contribs.org/index.php/topic,51181.0.html here]'''
'''There is a separate page that addresses the design of a Docker contrib [http://wiki.contribs.org/Docker_design_concept here]'''
'''There is a separate page that addresses the design of a Docker contrib [http://wiki.contribs.org/Docker_design_concept here]'''
'''There is also a page to discuss on how to create a Docker image of SME [https://wiki.contribs.org/Docker_Image_of_SME here]'''
==About==
==About==
===Why Docker on SME Server?===
===Why Docker on SME Server?===
Docker containers hold one or more applications (and all it's dependecies) and can be started and stopped at will. The containers, when activated, use the Linux kernel namespaces and are operating isolated from the rest of your server, except for storage/mount points and networking, depending on the configuration of the container. Some applications require special PHP versions or other modifications to your server settings that are not desirable and may effect yum updates and upgrades. Docker containers is a way to have such an application packed with all it's dependencies and run it isolated. You can have multiple containers running, depending on your server hardware capacity.
Docker containers hold one or more applications (and all it's dependencies) and can be started and stopped at will. The containers, when activated, use the Linux kernel namespaces and are operating isolated from the rest of your server, except for storage/mount points and networking, depending on the configuration of the container. Some applications require special PHP versions or other modifications to your server settings that are not desirable and may effect yum updates and upgrades. Docker containers is a way to have such an application packed with all it's dependencies and run it isolated. You can have multiple containers running, depending on your server hardware capacity.
Examples:
Examples:
sharedfolders-2.1.1-smeserver-9.0-fws
sharedfolders-2.1.1-smeserver-9.0-fws
frontaccounting-3.2.1-smeserver-8.1-contribsorg
frontaccounting-3.2.1-smeserver-8.1-contribsorg
Why the SME Server version in the naming convention if it's all inside the container? Well, it could well be that the application inside the container will use some of SME Server specifics such as the db, templates or perl interaction. In that case we need to make sure that we know for which SME Server the image was build.
Why the SME Server version in the naming convention if it's all inside the container? Well, it could well be that the application inside the container will use some of SME Server specifics such as the db, templates or perl interaction. In that case we need to make sure that we know for which SME Server the image was build.
==Challenges==
==Installation==
===Contrib===
yum --enablerepo=extras install epel-release.
yum install smeserver-extrarepositories-docker-ce
signal-event yum-modify
yum --enablerepo=smecontribs,extras,epel install smeserver-docker
signal-event post-upgrade;signal-event reboot
(Note the contrib is still in smetest)
====Avoiding conflicts====
docker-compose templates used:
smeserver-docker
01version
10HelloWorldTest
smeserver-rocketchat
20rocketchat
====config entries====
config setprop docker iptables false/true - default false
config setprop docker DNS [192,168.10.1,8.8.8.8] - defaults to LocalIP
config setprop docker DockerNetwork [IP range eg 192.168.100.0/24] - defaults to dockers own choice. Range is not yet checked for validity.
There is an action to update the core files:
smeserver-docker-update
{{Note box| Note to self - probably needs quotes around "false" for iptables}}
config show docker
status enabled/disabled - enabled by default
iptables true/false - false by default to prevent docker manipulating iptables
config show containerd
status enabled/disabled - enabled by default - called and used by docker
See if it works:
systemctl status docker
====Testing====
We can run docker directly but the preferred method is to use compose
curl -L https://github.com/docker/compose/releases/download/1.29.2/docker-compose-`uname -s`-`uname -m` > /usr/local/bin/docker-compose
chmod +x /usr/local/bin/docker-compose
chgrp docker /usr/local/bin/docker-compose
A test compose file is installed.
cd /home/e-smith/files/docker/configs
docker-compose up -d hello_world
Add your own templates to:
/etc/e-smith/templates/home/e-smith/files/docker/configs/docker-compose.yml
or:
/etc/e-smith/templates-custom/home/e-smith/files/docker/configs/docker-compose.yml
To expand the template:
signal-event smeserver-docker-compose-update
cd /home/e-smith/files/docker/configs
docker-compose up -d my_hello
Using plain docker:
docker run hello-world
Other commands:
docker ps -a
docker rm <id>
docker images
docker rmi <id>
==Things to do==
Plenty
===Challenges===
* How to interact with localhost PAM or LDAP from within a container?
* How to interact with localhost PAM or LDAP from within a container?
I think that you can access localhost services by adding:
--net="host" to docker run
This means any services on the docker container are equally valid 'localhost' services accessible from the server itself so you need to ensure the server is properly firewalled. See Issues below.
* Many more...
* Many more...
==Installation==
==Notes==
Docker requires some RPM's that are not available in the default upstream repo's. So we need to enable the epel repo first. See ''[[epel]]''
====Networking====
{{WIP box | This is still a work in progress. the following are notes for reference only}}
Docker attempts to guess what network to use and sets a bridged interface for it.
Access to the container.
This allows access to any local services, and any ports in the container will appear locally
v1 format
--net="host"
v2 + format
Docker
--network host
Compose
network_mode: host
This maps container port 80 to host port 8088
# container:host
ports:
- 8080:8080
So if you ran an Apache container service on port 80, you can connect to it from the host using
container.ip.add:8088
Using --network host means it is easier to connect to the container using the local IP address. Simple port forwarding/opening will suffice.
However, it exposes all ports on the container locally, and there may also be conflicts with local ports.
Using a port mapping is preferred, but your SME server will then block access container access to local services such as DNS.
The answer is probably to statically set the Docker network, and then add the network to 'Local Network'. You can then expose ports via the docker config entry eg:
docker=service
status=enabled
UPDPort=1234
TCPPort=8088
I am working on this currently but the LocalNetworking approach doesn't work. It probably need manipulation of the firewall with templates.
=== Login to container===
If permitted, most containers can be logged into using this:
docker exec -t -i -u root <container_name> /bin/bash
===SME Server specifics===
By default Docker will store all images, containers and other data in:
By default Docker will store all images, containers and other data in:
/var/lib/docker
/var/lib/docker
'''/home/e-smith/files/docker'''
'''/home/e-smith/files/docker'''
===File permissions===
You may have issues writing to local filesystems from Docker images.
First add something like this to your compose file
volumes:
- /opt/uploads/:/opt/uploads/
You may need to find out what permissions are required.
In RocketChat I had to add a dummy user and group like this
mkdir -p /opt/uploads
chmod 0777 /opt/uploads
I then could upload and check the ID that docker users. I thins case it was 65533
So I then did:
groupadd -g 65553 rocketchat
useradd -s /sbin/nologin -u 65533 -d /dev/null -g rocketchat rocketchat
chmod 0744 /opt/uploads
And then test again.
===Using a Docker image===
You should generally be prefer to use docker-compose for images.
==Building your own images==
* Notes
Manual, or..
https://github.com/docker/fig
==Related articles of interest==
* [http://jpetazzo.github.io/2014/01/29/docker-device-mapper-resize/ Container storage and (re)size]
===Setting up a (Private) Docker repository===
TBA
* https://blog.codecentric.de/en/2014/02/docker-registry-run-private-docker-image-repository/
==='Proposal test image:'===
An application that requires Java, PHP, Apache, MySQL and LDAP. The localhost MySQL and localhost LDAP should be used by the application. The application should be publicly available either on a subdomain or specific port on the FQDN. The application should only be available between 08:00AM until 19:00PM.
All application data should be incorporated by the default SME Sever backup mechanisms, including the image itself.
* Building the image based on centos6
* Configure networking, bridges and ports
and if it created the storage layout correctly:
* Start/restart and stop syntax of the application
* Configure cron
==General old notes==
The following methods and notes are left for reference.
By default, there are pre-built images available from the official [https://registry.hub.docker.com/ Docker Hub]. In our examples we will use the pre-built centos7 image.
By default, there are pre-build images available from the official [https://registry.hub.docker.com/ Docker Hub]. In our examples we will use the pre-build centos6 image.
To get a list of all available Centos images you can use:
To get a list of all available Centos images you can use:
docker search centos
docker search centos
You will be flooded with available images from the Docker hub. This is because everyone can have a free account on Docker hub and create one repository for him/herself. We limit our testing to the official Centos repo. With all the other images, you are on your own and usage is at your own risk.
You will be flooded with available images from the Docker hub. This is because everyone can have a free account on Docker hub and create one repository for him/herself. We limit our testing to the official Centos repo. With all the other images, you are on your own and usage is at your own risk.
===Downloading a docker image===
===Downloading a docker image===
To download the centos6 image to your local server, issue the following command as root:
To download the centos7 image to your local server, issue the following command as root:
docker pull centos:centos6
docker pull centos:centos7
where the syntax is 'centos' as the main repository and 'centos6' the specific version. Would you issue only 'docker pull centos', then all centos versions will be downloaded. So be specific.
where the syntax is 'centos' as the main repository and 'centos7' the specific version. Would you issue only 'docker pull centos', then all centos versions will be downloaded. So be specific.
Once the image has been downloaded, you can check your local images by issuing:
Once the image has been downloaded, you can check your local images by issuing:
docker images
docker images
The listing included the Image ID and Name. These are important to run additional commands when the container is running.
The listing included the Image ID and Name. These are important to run additional commands when the container is running.
===Running a docker container===
===Running a docker container===
Now that we have downloaded the centos6 image it's time to give it a spin. To start the cento6 container we can issue the follwoing command:
Now that we have downloaded the centos7 image it's time to give it a spin. To start the cento6 container we can issue the following command:
docker run -t -i --net="host" centos:centos6 bash
docker run -t -i --net="host" centos:centos7 bash
This will tell docker to run the centos6 container interactiveley from the local centos repo, use the host network interface and start bash. After a few seconds you will be presented with the bash prompt inside the centos6 container:
This will tell docker to run the centos6 container interactively from the local centos repo, use the host network interface and start bash. After a few seconds you will be presented with the bash prompt inside the centos7 container:
bash-4.1#
bash-4.1#
and to check if we are really inside the centos6 container we can display the release version:
and to check if we are really inside the centos6 container we can display the release version:
cat /etc/redhat-release
cat /etc/redhat-release
which will result in:
which will result in:
CentOS release 6.5 (Final)
CentOS release 7.8 (Final)
From here you can use the normal commands like yum etc.
From here you can use the normal commands like yum etc.
===Copy docker images===
===Copy docker images===
Docker images are stored on your local server. If you want to run the image on another machine you first have to take the image out of your local image repository and save the image in a transferable format. For this the ''save'' the image in .tar format. To get a listing of all available images on your local server:
Docker images are stored on your local server. If you want to run the image on another machine you first have to take the image out of your local image repository and save the image in a transferable format. For this the ''save'' the image in .tar format. To get a listing of all available images on your local server:
docker images
docker images
will result in (example):
will result in (example):
[root@sme9 ~]# docker images
[root@sme9 ~]# docker images
REPOSITORY TAG IMAGE ID CREATED VIRTUAL SIZE
REPOSITORY TAG IMAGE ID CREATED VIRTUAL SIZE
sme9 6.5 55db4355a2de 46 minutes ago 854.7 MB
sme9 6.5 55db4355a2de 46 minutes ago 854.7 MB
leszekk/centos_minimalcd 6.5 bc56fa8f1204 8 months ago 452.6 MB
leszekk/centos_minimalcd 6.5 bc56fa8f1204 8 months ago 452.6 MB
To create a copy of our sme9 image and save it as 'copyofsme9 you need to enter the following command:
To create a copy of our sme9 image and save it as 'copyofsme9 you need to enter the following command:
docker save sme9:6.5 > /tmp/copyofsme9.tar
docker save sme9:6.5 > /tmp/copyofsme9.tar
which will result in a copyofsme9.tar file in your /tmp directory of your local server. You can now copy/move this file to another server or simply archive it for later usage.
which will result in a copyofsme9.tar file in your /tmp directory of your local server. You can now copy/move this file to another server or simply archive it for later usage.
To use the copyofsme9.tar file on another server and use it on that server with Docker, we can load it into the repository of the new server:
To use the copyofsme9.tar file on another server and use it on that server with Docker, we can load it into the repository of the new server:
docker load -i < /downloads/copyofsme9.tar
docker load -i < /downloads/copyofsme9.tar
After Docker has loaded the file, you can check it's availability by executing: docker imagesand you can use it just like any other image on your new server. You can use the ''save'' and ''load'' commands to clean up your local repository and share copies of your image.
After Docker has loaded the file, you can check it's availability by executing: docker images and you can use it just like any other image on your new server. You can use the ''save'' and ''load'' commands to clean up your local repository and share copies of your image.
===Docker networking===
===Docker networking===
===Docker Name resolution===
===Docker Name resolution===
Other DNS can be added to the unit file or daemon.json - see further below for details.
Or you could add directly from the command line
docker run -i -t -dns 208.67.220.220 -dns 208.67.220.222 sme9_real:6.5 /bin/bash
===Docker Compose===
https://github.com/docker/compose/releases/tag/1.29.2
curl -L https://github.com/docker/compose/releases/download/1.29.2/docker-compose-`uname -s`-`uname -m` > /usr/local/bin/docker-compose
chmod +x /usr/local/bin/docker-compose
===Shipyard web GUI===
Deprecated
There is a separate page on how to install Shipyard, the Docker web GUI [http://wiki.contribs.org/Shipyard here]
===Issues===
This was a v9 issue. Leaving for reference.
You will find that if you use 'host' networking docker will set /sys as Read Only and you will get an error with the raid_check as per this bug
https://bugs.contribs.org/show_bug.cgi?id=10660
If you don't use host networking, you use the internal IP address set with docker, but this address is unknown as a local network to SME and it will block any queries emanating from the container. I am looking at this with the contrib.
===Repo setup===
db yum_repositories set docker-ce-stable repository \
BaseURL 'https://download.docker.com/linux/centos/7/$basearch/stable' \
EnableGroups no \
GPGCheck yes \
GPGKey https://download.docker.com/linux/centos/gpg \
Name 'Docker Stable' \
Visible yes \
status enabled
signal-event yum-modify
yum --enablerepo=extras,docker-ce-stable install docker-ce docker-ce-cli
or to try with the smeserver-docker contrib - still modifying this
yum --enablerepo=extras,smetest install smeserver-docker
So we get a service in /etc/systemd/system-preset/49-koozali.preset
config set docker service status enabled
config set containerd service status enabled
mkdir -p /home/e-smith/files/docker
mkdir -p /home/e-smith/files/docker/configs
Startup options
The big issue is getting this to work correctly with the firewall.
https://docs.docker.com/compose/compose-file/compose-file-v3
Host mode where the container has the same IP as the server and the service runs the same as any other host service, and can talk to other local host services easily, but exposes the container more.
Bridge mode where the container is on it's own internal docker network that is bridged to the local machine, but then queries emanating from the container will have the internal docker IP and can be refused by real 'local' services eg AD/MySQL etc. unless the firewall or other services can be adjusted.
https://docs.docker.com/compose/compose-file/compose-file-v3/#network_mode
network_mode: "bridge"
network_mode: "host"
network_mode: "none"
network_mode: "service:[service name]"
network_mode: "container:[container name/id]"
https://docs.docker.com/compose/compose-file/compose-file-v3/#ports
Port mapping is incompatible with network_mode: host
https://docs.docker.com/engine/reference/commandline/dockerd/#daemon-configuration-file
We can add startup options via /etc/docker/daemon.json
===Files to modify?===
For now I have created a hardcoded file with the content from below
mkdir -p /usr/lib/systemd/system/docker.service.d
/usr/lib/systemd/system/docker.service.d/50koozali.conf
If we template then we would use two fragments like this:
/etc/e-smith/templates/usr/lib/systemd/system/docker.service.d/50koozali.conf/40service
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
# docker home set to /home/e-smith/files/docker
ExecStart=
ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock -g /home/e-smith/files/docker/data
ExecReload=/bin/kill -s HUP $MAINPID
TimeoutSec=0
RestartSec=2
Restart=always
/etc/e-smith/templates/usr/lib/systemd/system/docker.service.d/50koozali.conf/80install
[Install]
WantedBy=sme-server.target
expand-template /usr/lib/systemd/system/docker.service.d/50koozali.conf
But now we can use /etc/docker/daemon.json
This can be templated. Key point to avoid is a conflict between the docker internal network and out own.
We also want to know what is happening with IPTables rules
eg
{
"bip": "192.168.100.1/24", << Set our own choice of internal network
"data-root": "/home/e-smith/files/docker/data", << set our own data directory
"dns": ["127.0.0.1", "192.168.10.212"] << set our own DNS
}
===Docker Networking===
Docker now does it's own thing with IPTables and it is hard to disable - we need to be careful here
https://docs.docker.com/network/iptables/
How do we check conflicts?
ip addr show docker0
docker network ls
docker network inspect bridge
https://www.baeldung.com/ops/docker-network-information
docker network inspect -f '{{range .IPAM.Config}}{{.Subnet}}{{end}}' bridge
172.17.0.0/16
So one way is to add it to the daemon.json file (see above)
{
"iptables": false
}
And note:
Restart the Docker daemon and voila: your containers will not be exposed to every possible interface but you will need to explicitly manipulate your iptables rules if you want the traffic to pass through, e.g.: this is needed to NAT your containers:
-A POSTROUTING -s 172.17.0.0/24 -o eth0 -j MASQUERADE
An alternative which I use on RocketChat is to proxy calls using mod_proxy_tunnel.so
/etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/20LoadModule98ExtraMod
#
{
# Load wstunnel if available
if ( -e '/usr/lib64/httpd/modules/mod_proxy_wstunnel.so' ||
-e '/usr/lib/httpd/modules/mod_proxy_wstunnel.so') {
$OUT .= "LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so\n";
}
}
You can then use some custom httpd templates to create a proxy pass virtual host.
===Docker Compose===
https://docs.docker.com/compose/install/
Check the latest release:
https://github.com/docker/compose/releases/
curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
chmod 0700 /usr/local/bin/docker-compose
chgrp docker /usr/local/bin/docker-compose
Add template fragments here to make your compose file:
/etc/e-smith/templates/home/e-smith/files/docker/configs/docker-compose.yml
Note that there is now Compose format.
https://github.com/docker/compose#where-to-get-docker-compose
https://github.com/docker/compose-switch
==Setting up a (Private) Docker repository==
=== Old Unit file ===
Previous unit file for ref
[Unit]
Description=Docker Application Container Engine
Documentation=https://docs.docker.com
BindsTo=containerd.service
After=network-online.target firewalld.service containerd.service
Wants=network-online.target
Requires=docker.socket
[Service]
Type=notify
# the default is not to use systemd for cgroups because the delegate issues still
# exists and systemd currently does not support the cgroup feature set required
# for containers run by docker
ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock -g /home/e-smith/files/docker
ExecReload=/bin/kill -s HUP $MAINPID
TimeoutSec=0
RestartSec=2
Restart=always
# Note that StartLimit* options were moved from "Service" to "Unit" in systemd 229.
# Both the old, and new location are accepted by systemd 229 and up, so using the old location
# to make them work for either version of systemd.
StartLimitBurst=3
# Note that StartLimitInterval was renamed to StartLimitIntervalSec in systemd 230.
# Both the old, and new name are accepted by systemd 230 and up, so using the old name to make
# this option work for either version of systemd.
StartLimitInterval=60s
# Having non-zero Limit*s causes performance problems due to accounting overhead
# in the kernel. We recommend using cgroups to do container-local accounting.
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
# Comment TasksMax if your systemd version does not support it.
# Only systemd 226 and above support this option.
TasksMax=infinity
# set delegate yes so that systemd does not reset the cgroups of docker containers
Delegate=yes
# kill only the docker process, not all processes in the cgroup
KillMode=process
[Install]
WantedBy=multi-user.target
===Docker notes===
==Bugs==
Please raise bugs under the SME-Contribs section in {{BugzillaFileBug|product=|component=|title=bugzilla}}and select the smeserver-docker component or use
{{BugzillaFileBug|product=SME%20Contribs|component=smeserver-docker |title=this link}}.
{{#bugzilla:columns=id,product,version,status,summary |sort=id |order=desc |disablecache=1 |component=smeserver-docker |noresultsmessage="No open bugs found."}}
==Changelog==
Only released version in smecontrib are listed here.
{{ #smechangelog: smeserver-docker }}
[[Category:Containers]]
[[Category:Containers:Docker]]
[[Category:Containers]]
[[Category:Contrib]]
[[Category:Containers:Docker]]