Certificate ssl management

From SME Server
Jump to navigation Jump to search


Certficate for SME Server 8 and 9

This contrib is made to help the managing of SSL certificates if you need to use commercial Certificates by example.

Maintainer

stephdl Stéphane de Labrusse AKA Stephdl

Description

This contribution for smeserver adds a paner in the server-manager in order to save the certificate, the secret key and eventually the intermediate certificate if needed without the use of the command line interface.

see that wiki page for more informations on how to set it manually

On SME Server by default, all services that require an SSL certificate using the same self-signed and re-generate every year (valid for one year). It is often useful to replace it with another certificate. This contrib give easier the procedure, which is valid both for an official certificate (purchased from Verisign or equivalent), an independent authority as CAcert, or private authority (eg, managed by PHPki).

The first step is of course to obtain a certificate. If it signed by a private CA, you should generate it with a wildcard (ie which will be valid for all subdomains of the main domain). It should be given by a *.domain.tld as the common name.. Then we need to get this certificate and the associated private key in a PEM format.

If you want to buy a commercial ssl certificate, you may need to do a 'csr' (certificate request), this is how to do that. Here an example with Gandi


  • Generating an RSA key:
openssl genrsa -out mondomaine.com-key.pem 2048
  • Generate the CSR
openssl req -new -key mondomaine.com-key.pem -out mondomaine.com.csr

You will need to answer to many questions, think about it before you type.

Requirements

You need to enable the stephdl repository

Installation

Remember to first configure the required stephdl repository, then issue the following command on the SME Server shell:

yum install smeserver-certificate --enablerepo=stephdl

The 'official' way is to perform

signal-event post-upgrade;  signal-event reboot

but if you don't want to reboot your server, do

signal-event console-save

Go to the manage ssl certificate panel on Server Manager and past your full server.crt and full server.key (included -----BEGIN CERTIFICATE-----/-----END CERTIFICATE----- and -----BEGIN RSA PRIVATE KEY-----/-----END RSA PRIVATE KEY-----).

There is also the possibility one is getting a custom certificate from an Intermediate Certificate Authority. If this is the case you'll get an additional CA certificate and you need to past into the box called 'SSL intermediate chain certificate'

  • If you want to get back to the default SME Server certificates, simply blank all the contents and press save.
  • If you set wrong certificates, the server Web may crash. You will have to do a command line in a root Terminal to get back to the default certificate :
signal-event certificate-revert

Uninstall

yum remove smeserver-certificate; signal-event console-save

Bugs

For now there is no entry on bugzilla, please direct your issue to stephdl Stéphane de Labrusse AKA Stephdl