Changes

===Maintainer===

===Maintainer===

[[User:VIP-ire|Daniel B.]]<br/>

[mailto:daniel@firewall-services.com[[User:VIP-ire|Daniel B.]]] from [http://www.firewall-services.com Firewall Services]

[http://www.firewall-services.com Firewall Services]<br>

=== Version ===

=== Version ===

=== Requirements ===

=== Requirements ===

*SME Server 7.X

*SME Server 7.X

=== Installation ===

=== Installation ===

*install the rpms

*install the rpms

  yum --enablerepo=smecontribs install smeserver-bridge-interface

  yum --enablerepo=smecontribs install smeserver-bridge-interface

**'''bridgeInterface''': (br0) is the name of the bridge device (usually br0)

**'''bridgeInterface''': (br0) is the name of the bridge device (usually br0)

**'''ethernetInterface''': (eth0|eth1) is the real interface you want to bridge. It should already be set to your actual InternalInterface

**'''ethernetInterface''': (eth0|eth1) is the real interface you want to bridge. It should already be set to your actual InternalInterface

{{Warning box|The bridge contrib is not compatible with the NIC bonding option. If you're running in serveronly mode and use NIC bonding, you should disable it before starting the bridge}}

{{Warning box|The bridge contrib is not compatible with the NIC bonding option. If you're running in serveronly mode and use NIC bonding, you should disable it before starting the bridge. To do so, you can use the admin console, either by loging in as the admin user, or as root, and then type the command console}}

**'''tapInterface''': (tap0,tap1) is a comma separated list of tap interfaces to create and add to the bridge. Usually, you'll only need one tap interface (tap0)

**'''tapInterface''': (tap0,tap1) is a comma separated list of tap interfaces to create and add to the bridge. Usually, you'll only need one tap interface (tap0)

**'''status''': (enabled|disabled) is the status of the service (should it be started automatically on boot)

**'''status''': (enabled|disabled) is the status of the service (should it be started automatically on boot)

and select the smeserver-bridge-interface component or use {{BugzillaFileBug|product=SME%20Contribs|component=smeserver-bridge-interface|title=this link}}

and select the smeserver-bridge-interface component or use {{BugzillaFileBug|product=SME%20Contribs|component=smeserver-bridge-interface|title=this link}}

----

----

[[Category:Contrib]]

[[Category:Contrib]]