3,239
edits
Changes
From SME Server
Jump to navigationJump to searchBooting: this page is retired for v10 on left for reference only (view source)
Revision as of 21:45, 7 December 2017
, 21:45, 7 December 2017→To use an ext4 file system
{{Languages}}
{{Languages}}
This article describes the booting process of SME Server.
This article describes the booting process of SME Server.
==Installation==
When booting from the installation CD you will get a boot prompt where you can simply press Enter to start the standard installation (or upgrade) routine. On i586 (e.g. VIA C3) based machines type smei586 and press Enter.
When booting from the installation CD you will get a boot prompt where you can simply press Enter to start the standard installation (or upgrade) routine. On i586 (e.g. VIA C3) based machines type smei586 and press Enter.
Afterwards you can choose which language you want to use for the following installation process.
Afterwards you can choose which language you want to use for the following installation process.
==Boot Options==
You can use the function keys F1 to F5 to get more information about different boot options.
You can use the function keys F1 to F5 to get more information about different boot options.
{{Note box|If installing on a i586 machine you will need to replace ''sme'' with ''smei586'' in the following commands.}}
{{Note box|If installing on a i586 machine you will need to replace ''sme'' with ''smei586'' in the following commands.}}
====Installer Boot Options====
===Normal installation===
sme
sme
===Set raid type===
sme raid=[none,0,1,5,6]
*Installation hangs and the last screen shown is "Welcome to SME Server".
* For SME Server 8 raid=none and raid=0 are for no software raid, other arguments are for raid levels (eg Raid1, Raid5, Raid6)
* For SME Server 9 raid=none is for no software raid, other arguments are for raid levels (eg Raid0, Raid1, Raid5, Raid6)
{{Note box|msg=For SME Server 9 the option '''sme raid=none''' have a different behaviour since the /boot is always made on a software '''raid 1''' called /dev/md0. All other partitions (/ and swap) are without software raid. (see [[bugzilla:8369]])}}
===Set number of spares===
In case you have 3 or more hard disks in your server and don't want to have a spare disk
sme spares=[0-(disks-2)]
===Set drive type to include===
Nominate which drives the installer will use to put the OS onto, not nominating a drive will exclude it from use, if left blank will include all drives
sme drives=[hda,sda,xvda,...]
===Set drives to exclude===
Nominate which drives the installer will not try to install the OS to eg a boot USB with the iso on it, or other connected backup USB drives, see note below
sme exclude= sdc
===To install SME without software RAID===
For example MB with fake raid or with 'Config Disk' issue [[bugzilla:5850]]
sme raid=none
{{Note box|msg=For SME Server 9 '''raid=0''' means that the raid level required is 0 (eg : Raid0). If you want no software raid you have to choose '''raid=none'''}}
===To install SME without a logical volume manager type===
sme nolvm
===To have /, /tmp, /var, /home/e-smith/files and swap on separate partitions type===
sme multipart
===If you have a driver disk type===
sme dd
===Installation hangs===
The last screen shown is "Welcome to SME Server".
sme ide=nodma
sme ide=nodma
===dmraid (SME8.1 off by default)===
If required can be appended at boot time
sme dmraid
===Installation errors when disks previously used with fake raid.===
sme ide=nodmraid
sme ide=nodmraid
===SATA Driver installation error===
eg IBM IntelliStation M Pro stalls
sme acpi=off
sme acpi=off
===Intel DG965 Motherboards (G33xx)===
sme pci=nommconf acpi=off all-generic-ide
sme pci=nommconf acpi=off all-generic-ide
===To enable the [[Booting#Rescue_Mode_Help|rescue mode]] type===
sme acpi=off
sme rescue
===To use an ext4 file system===
sme noraid
(except for /boot) instead of the default ext3.
sme ext4
{{note box|For SME Server 9 it is no longer needed to set '''sme ext4''' to have a ext4 file system since it is the default file system}}
===Notes===
The installer without anything being passed should behave identically for disks
< 10 with the exception that it won't include any device that is housed on a
drive that needs the usb-storage or spb2 module.
If you want to include drives that are on USB or firewire you must use the
drives= option and specify all drives (not just the usb/firewire drives) that
you want to use.
If you don't want to use raid at all specify raid=0 or raid=none (they are
identical, 0 means none).
If you don't want a spare you should use the spares= option and specify a value
of 0. By default 1 spare will be added for disks > 3. Another spare drive
will be added for every additional 7 drives you add (10, 17, ...).
If you specify a raid level but don't have enough drives it will fall back to
the next highest raid level (ex. 5 drives, 2 spares, raid 6 will fail back to
raid 5 as 5-2=3 useable drives).
From SME ISO releases 7.5.1 and SME 8.0 the installer will automatically exclude the drive containing the install media or ks files. Refer http://forums.contribs.org/index.php/topic,46866.msg230681.html#msg230681
==General Boot Help==
Certain hardware configurations may have trouble with the automatic hardware detection done during the installation. If you experience problems during the installation, restart the installation adding the ''noprobe'' option.
Certain hardware configurations may have trouble with the automatic hardware detection done during the installation. If you experience problems during the installation, restart the installation adding the ''noprobe'' option.
With the standard installation that would be
With the standard installation that would be
and so on.
and so on.
==Kernel Parameter Help==
Some kernel parameters can be specified on the command line and will be passed to the kernel. This does not include options to modules such as ethernet cards or devices such as CD-ROM drives.
Some kernel parameters can be specified on the command line and will be passed to the kernel. This does not include options to modules such as ethernet cards or devices such as CD-ROM drives.
To pass options to modules, you will need to use the noprobe mode to disable PCI autoprobing. When the installer asks for your device type that needs an option or parameter passed to it, there will be a place to type those in at that time.
To pass options to modules, you will need to use the noprobe mode to disable PCI autoprobing. When the installer asks for your device type that needs an option or parameter passed to it, there will be a place to type those in at that time.
==Rescue Mode Help==
The installer includes a rescue mode which can be used when a system does not boot properly. The rescue mode includes many useful utilities (editor, hard drive and RAID tools, etc.) which will allow one to restore a system to a working state.
The installer includes a rescue mode which can be used when a system does not boot properly. The rescue mode includes many useful utilities (editor, hard drive and RAID tools, etc.) which will allow one to restore a system to a working state.
sme rescue
sme rescue
To actually be able to edit files, remount the root partition by typing:
Some problems with booting that cannot or will not be fixed through development of SME7 and solutions how to bypass them can be found [[KnownProblems#Boot_options_for_install|here]].
mount -n -o remount /
==More==
Some problems with booting that cannot or will not be fixed through development of SME8 and solutions on how to bypass them can be found [[KnownProblems#Boot_options_for_install|here]].
You can run Memtest86 to check your RAM by typing
You can run Memtest86 to check your RAM by typing
<noinclude>----
<noinclude>----
[[Category:Howto]]</noinclude>
[[Category:Howto]]
[[Category:Administration]]</noinclude>
