1,574
edits
Changes
From SME Server
Jump to navigationJump to search→Assumptions
== Assumptions ==
== Assumptions ==
{{Note box|This HowTo uses the denomination of Hard Disks with PATA (IDE), when you have Sata Hard Disks the names of these drives are '''sda (/dev/sda)''' for the first, '''sdb (/dev/sdb)''' for the second, '''sdc (/dev/sdc)''' for the third...etc. You have to adjust these command lines to the good name of your drives}}
{{Note box|This HowTo uses the default naming of Hard Disks with PATA (IDE), when you have Sata Hard Disks the names of these drives are '''sda (/dev/sda)''' for the first, '''sdb (/dev/sdb)''' for the second, '''sdc (/dev/sdc)''' for the third...etc. You have to adjust these command lines to match the naming of your drives.}}
*It assumes adding one PATA (IDE) harddrive as master on the second IDE controller, but the process will be similar in other situations. More on that in step 2.1.
*It assumes adding one PATA (IDE) harddrive as master on the second IDE controller, but the process will be similar in other situations. More on that in step 2.1.
