UpgradeDisk

Upgrade Disk

Summarised from http://forums.contribs.org/index.php?topic=30745.0

1. On the old SME server prior to shutting down do signal-event pre-backup then shutdown & remove the drive
2. On the new machine do a fresh install of sme7
3. Shut down & install old drive and start machine.
4. cd /
5. mkdir /mnt/tmp
6. mount /dev/hdb2 /mnt/tmp (adjust "hdb2" according to where the 6.0 drive is installed).
7. db configuration setprop backup Program CopyFromDisk status enabled
8. signal-event pre-restore
9. signal-event restore-tape /mnt/tmp (note: this step may take a long time depending on how much data is being restored
10. cd /etc/e-smith
11. mv templates-custom templates-custom.old
12. mkdir templates-custom
13. mv templates-user-custom templates-user-custom.old
14. mkdir templates-user-custom
15. signal-event post-upgrade
16. signal-event reboot
17. Shutdown and remove old drive

---