Samba4 Development
Introduction
This wiki page will be used to track the integration effort of Samba 4 into SME 9+
Samba 4 Packages
Upstream Centos 6 & 7 do not provide support for the full version of Samba 4. Packages available in the upstream repos are a crippled version of Samba 4, with many of the features associates with Active Directory disabled. The reason for this is detailed here. A solution to provide Samba 4 active directory does not look to be forthcoming by viewing Samba status in the Fedora project.
To further development of support for Samba 4 on the Koozali SME Server, Samba 4 packages from Sernet were selected. These packages will not immediately install cleaning on SME 9 due to the customization of Centos associated with SME 9, so the Sernet packages where re-built for SME 9. Details of this rebuild along with a link to the rebuilt packages are located in bugzilla:8075
After rebuilding, these packages do install cleanly but the services will not start using the init.d scripts provided with the packaged due to changes made during the re-build of the packages for SME 9. A Daemontools run script will need to be developed to start the Samba 4 service.
General Development Notes
Template Fragments
/etc/smb.conf
Complete rewrite of all template fragments
smb.conf Considerations
The smb.conf configuration file can be simplified significantly for Samba 4. Of specific interest are the following new parameters:
Server Services: This parameter is not very well documented, but from what I could find thefollow services can be provided by the Samba daemon: s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, ntp_signd, kcc, dnsupdate, dns, smb, nmb, winbind. The default for this parameter is: server services = s3fs rpc nbt wrepl ldap cldap kdc drepl winbind ntp_signd kcc dnsupdate dns. Services can be added/remove from the default by a +/- and the service to add/remove. Example
server services = -s3fs (remove) +smb (add). Note that the smb, nmb, and windbind services are services equivalent to the older, Samba 3, type services (stand alone daemons). Of specific interest to SME 9 may be the use of the nmb service for WINS support. As we begin testing we may need to enable this service and possibly smb for simple share access.
Server Role: Samba 4 currently only supports the active directory domain controller server role. For now, we'll force Samba config into DC server role, but provide a fragment for expansion later. There is a long explanation behind this, but for now, restriction doesn't hurt us. SME as a DC will provide auth for both domain membership and simple shares by either joining the domain or logging into the server every time.
/etc/raddb/radius.conf
Need to check and/or modify the following existing fragments:
etc/raddb/radiusd.conf/25modules30smbpasswd: # An example configuration for using /etc/samba/smbpasswd.
etc/raddb/radiusd.conf/25modules30smbpasswd:} passwd smbpasswd \{
etc/raddb/radiusd.conf/25modules30smbpasswd: filename = /etc/samba/smbpasswd
etc/raddb/radiusd.conf/25modules25mschap: # reading from /etc/smbpasswd.
etc/raddb/radiusd.conf/25modules25mschap: # If you are using /etc/smbpasswd, see the 'passwd'
etc/raddb/radiusd.conf/25modules25mschap: # module for an example of how to use /etc/smbpasswd
etc/raddb/radiusd.conf/65authorization40default: # If you are using /etc/smbpasswd, and are also doing
etc/raddb/radiusd.conf/65authorization40default: # configure the 'smbpasswd' module, above.
etc/raddb/radiusd.conf/65authorization40default: ( $ldap{Authentication} || 'disabled' ) eq 'enabled' ? 'ldap' : 'smbpasswd';
/etc/krb5.conf
Create based new template fragments for this configuration file
Configuration Database Parameters
SMBD : Delete
NMBD : Delete
SMB : In general, all of the template fragments will be redesigned to allow dbase parameters to override many Samba defaults. Specific parameters that need to be defined or modified are as follows:
- Remove from current default
- UnixCharSet: Delete
- Default
- Workgroup: Defaulted to sme-server
- serverString: Defaulted to SME Server
- ServerRole: Redefine with the following:
- SA: Stand Alone Server Mode
- BD: Backup Domain Controller/Member
- DC: Domain Controller (Current default. See server role explanation)
- OpLocks: Defaulted to enabled
- KernelOplocks: Add and default to enabled
- Level2Oplocks: Add and default to enabled
- OSLevel: Redefine to 65
- dnsForwarder: New parameter that could be defined to forward DNS requests from the Samba DNS to another DNS.
- Others (optional): These parameters are meant to take smb.conf inputs as defined the man pages. Defaults for these parameters are the same as the corresponding defaults in the smb.conf man page. Template fragments feed these parameters into the smb.conf file with minimal syntax checking, as it is assumed those who manually input them know what they are doing.
- NameResolveOrder: The order in which name resolution will take place by the Samba daemon.
- ServerServices: See the server services discussion detailed under smb.conf section
- SMBPorts:
- SocketOptions:
- WideLinks:
- GuestAccount:
- GuestOK: y/n
- LogonDrive: Drive letter to be used to the login drive when users login to a domain
- RoamingProfiles: y/n
- LogonPath:
- BindInterfacesOnly: y/n
- CaseSensitive: y/n
- MaxLogSize: Samba log size in kilobytes. Default set to 50.
KRB5 : Create new configuration dbase entry for Kerberos service in Samba
- default_realm: This parameter is built into a template fragment, but we will not define it at default. The template fragment will build the default realm by concatenating the SystemName and DomainName reordered elsewhere in the configuration dbase.
- dns_lookup_realm = false;
- dns_lookup_kdc = true;
Services to Modify
smbd : Remove
- Remove /var/service/smbd
- Remove /services/smbd
- Remove /etc/rc.d/init.d/supervise/smb
- REmove /etc/rc.d/rc7.d/S91smb
- Remove /etc/rc.d/init.d/smbd
nmbd : Remove
- Remove /var/service/smbd
- Remove /services/smbd
- Remove /etc/rc.d/init.d/smbd
smb: Create (Note: I would have liked to have called this "Samba," but that would have meant changing alot of existing code that looks for "smb"
- Create /var/service/smb, using smbd as a template. Samba 4 should be started with /usr/sbin/samba -D
- Create symlink /service/smb -> /var/service/smb
- Create symlink /etc/rc.d/init.d/smb -> /etc/rc.d/init.d/daemontools
- Create symlink /etc/rc.d/rc7.d/S91smb -> /etc/rc.d/init.d/e-smith-service
DNS
Samba 4 includes an builtin DNS server that is required for proper operation of active directory. This internal DNS server is for AD functions only and does not provide caching DNS functions. Therefore, further research and development will be required to integrate the Samba DNS with TinyDNS.
LDAP
Need to look at the LDAP authentication backend and mechanism on SME. On the surface, it looks like all of the Samba related LDAP code will be dropped and much of the standard authentication code will need to be converted to Active Directory auth. This task should include looking at openldap-proxy.
Other Development Tasks to Research and Complete
- Local Authentication: Samba 4 provides support for local authentication through PAM. This will need to be looked and and sorted out, especially as it relates to the previous LDAP authentication work.
- Domain Server-Manager Panel: A new Domain server-manager panel should be developed and the workgroup panel removed. Further discussion will need to take place to determine what needs to go into this new panel. This panel will likely be fairly simple, as much of the configuration parameters associated Samba Active directory will be incorporated into template fragments and database entries.
- User/Group Server-Manager Panels: These panels will need to be looked at as they relate to template fragments, adjusting services, and updating database entries associated with Samba.
- Ibay Server-Manager Panel: This panel will need to be looked at as it relates to template fragments, adjusting services, and updating database entries associated with Samba.
- Events/Actions': Existing events and actions related to samba will need to be reviewed and updated accordingly. A new event/action may need to be developed to provision a new Active Directory Domain using the Samba-Tool utility.
- e-smith-samba: This package needs to be updated with development pieces detailed in this wiki page, for wider testing and development assistance.
Status
| Task | Status |
|---|---|
| Sernet Samba 4 package rebuild | DONE |
| Create daemontools service for Samba 4 | DONE |
| Re-Write smb.conf template fragments | DONE |
| Create Kerberos template fragments | DONE |
| Add/Modify SMB database entries | DONE |
| Create krb5 configuration dbase key | DONE |
| Re-configure init.d start-up/shutdown scripts | DONE |
| Investigate Samba DNS + TinyDNS | UNDERWAY |
